Most Popular Without Lights for Chevrolet Silverado

Easy installation and looks great

Overall I like the rack. I put it on a 2014 Toyota Tundra (Double Cab, 6.5' bed). It has worked well with no issues so far (a couple months), appears to be well built, lightweight, looks good. The load stops are useful and quick to adjust. It is a great value and is half the price of the other headache rack I was considering. I am dinging it a star for a couple reasons: 1. They could have done a better job with the way this thing attaches to the truck. The stake pocket rubber bushing thing is poorly conceived and difficult to line up correctly. For the drilled hole, I had to remove my rails to attach the bolt. 2. Parts of this rack are less robust than I'd like. The bottom panel (the part with the logo on it) is a pretty thin sheet of aluminum. The mesh is also pretty thin. Logo emblem is plastic.

2022 Tundra: Fit pretty well with the brackets sitting proud about an inch outside the top of the bed rail. I had to drill holes close to the outside of the bed rail to avoid the composite liner on the inside of the bed. you can look from beneath where you need to drill. I used the wire method to pull the bolt through the drill hole since there is no access. The kit provided with the rack was adequate. An 18mm socket would have helped. I cut one louver from the middle so that the rearview camera would not be obstructed. Its on and is sturdy!

Click to Enlarge

It's holding up and has not chipped any paint off

Perfect fit, easy to install, looks great. Really sets off those pipes. Thanks.

Click to Enlarge

Click to Enlarge

great product! I actually own an engraving shop and engraved the access plates for the bolt holes with the Gadsden coiled rattlesnake. Made it even better. I am constantly getting compliments about my "awesome" truck. As usual trailer customer service and ordering process is second to none.

It came in today, so after work I put it on my 2009 Dodge 1500 quad cab..truck looks amazing with the added protection for my rear window. Thank you!! etrailer.com has wonderful & durable products!

Click to Enlarge

Click to Enlarge

Went together and attached to the truck with ease, looks good. Now to put it to work!

2022 Tundra: Fit pretty well with the brackets sitting proud about an inch outside the top of the bed rail. I had to drill holes close to the outside of the bed rail to avoid the composite liner on the inside of the bed. you can look from beneath where you need to drill. I used the wire method to pull the bolt through the drill hole since there is no access. The kit provided with the rack was adequate. An 18mm socket would have helped. I cut one louver from the middle so that the rearview camera would not be obstructed. Its on and is sturdy!

Click to Enlarge

Very nice and heavy duty. Paint and welds were high quality Built to last. Very satisfied with this product. Installed on a reading body classic 2 9ft. Box

Click to Enlarge

Click to Enlarge

Click to Enlarge

Worked just as planned.

Still holding up well. After a year and a lot of 55 gal drums later, it is still strong and unmarred.

Absolutely love this rack! Installation was easy, instructions easy to follow. I did not put the tie downs on the top corners because I like the way it looks without. Nice low profile headache rack. 2016 TOYOTA TACOMA

Click to Enlarge

Click to Enlarge

Click to Enlarge

Easy to install. I modified my install a bit to accommodate my tonneau cover by adding shim material on the bed rail under the headache rack. I also left out the center piece which is an option.

Click to Enlarge

This product is excellent !!!! I installed it in just 20 minutes. 3trailer is a trusting supplier !!!! Excellent Customer Service and Quality Products !!!! Thank you.

Click to Enlarge

Worked just as planned.

Bolted up no problem , I custom configured mine for a nice ladder rack . ( The top has rails built in for lights , I altered stoppers to fit in the rails) . I cut the horns down to fit the truck under my car lift . Can't tell I cut 1 1/2 out of it .

Looks great, but the way it is secured to my truck could be better. I have to tighten the bolts every couple months, and even after tightening it, it still wobbles a bit. It still get the job done but wish it would have a stronger hold onto my truck bed.

Very nice headache rack. The only down side to this particular model is you cannot go through a carwash with it on since it stands above the roof of the truck

Looks great and fits my 08 Tundra well. Good mount for my LED light bar. Not delighted with the mounting system since it required removing the interior stake pockets to get the locks to expand. Also wobbles quite a bit on dirt roads, since it isn't pulling on a lot of sheet metal from my bed. I have plans to add a base plate to stabilize the vibrations, then it will be an outstanding product.

2022 Tundra: Fit pretty well with the brackets sitting proud about an inch outside the top of the bed rail. I had to drill holes close to the outside of the bed rail to avoid the composite liner on the inside of the bed. you can look from beneath where you need to drill. I used the wire method to pull the bolt through the drill hole since there is no access. The kit provided with the rack was adequate. An 18mm socket would have helped. I cut one louver from the middle so that the rearview camera would not be obstructed. Its on and is sturdy!

Click to Enlarge

I love the design and the quality. It looks just as I envisioned. It was definitely worth the extra money versus buying the similar but cheaper product from Amazon. It brought the truck's look to the next level.installation was easy and straight forward. Required no drilling or cutting.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Holes on the right side of rack itself weren't fully bored. Third brake light cut out doesn't quite line up. Product looks good otherwise, install was quick.

Click to Enlarge

This headache looks great and has done its job great.

Assembly was fairly simple. I love the options that this rack has. The channel allows you to mount all kinds of accessories, which is nice. Not sure how much abuse it would take but so far I really like this rack.

Easy installation. Well made. Heavy duty. Looks really cool.

Click to Enlarge

Everything seems good. When I receive the box it was broken on both ends the edges of the rack were scratched, but I believe the mounting brackets will cover that the packaging was very very poor, but the product seems very well-built.

Very nice headache rack. The only down side to this particular model is you cannot go through a carwash with it on since it stands above the roof of the truck

Looks great and fits my 08 Tundra well. Good mount for my LED light bar. Not delighted with the mounting system since it required removing the interior stake pockets to get the locks to expand. Also wobbles quite a bit on dirt roads, since it isn't pulling on a lot of sheet metal from my bed. I have plans to add a base plate to stabilize the vibrations, then it will be an outstanding product.

It only bolts down with two bolts. The bolts have vibrated loose several times. I have to check that it is secure often. Other then that, great product.

Very nice headache rack. The only down side to this particular model is you cannot go through a carwash with it on since it stands above the roof of the truck

Very nice and heavy duty. Paint and welds were high quality Built to last. Very satisfied with this product. Installed on a reading body classic 2 9ft. Box

Click to Enlarge

Click to Enlarge

Click to Enlarge

This headache rack is all I expected it to be. High quality construction and easy to install. I would recommend this rack to anyone that pulls a gooseneck trailer. It works beautifully.