Most Popular Dash Monitor for 2008 Ford Edge

I purchased the hard wired back up camera because I wanted a good clear picture and did not want to worry about wifi or Bluetooth interference. The camera took about an hour total to install. I adjusted the sensors, screwed the camera and sensor assembly along with the license plate onto the back of the truck. Pushed the tab on the 7 way plug connecter to take the OEM coupler apart, put the jumper in place and then just routed the wires towards the cab. I cut a "Plus sign" slit in the grommet in the floor, this grommet was about 8" from the sill plate and about even with the front edge of the front door opening. I had to pull the LH front sill plate off as well as the LH kick panel, and pulled the floor matt back. I do not have carpet in my truck but the process would be the same. I ran the wiring through the grommet and then up the LH A-pillar and above the headliner. I had to use the 5' jumper wire in order to run it up the A-pillar. I mounted the display screen in the top left corner of my windshield, very convenient yet out of the way. The display is very clear and the sensors read very well, when the beeps go to a "constant on" I am about 4" from an object. This seems close but the bumper is about 4 to 5" deep where the plate and camera assembly are mounted. The only thing I that gave me trouble was squeezing the OEM 7 way coupler onto the jumper wire that was provided, I originally installed the entire unit and it quit working, vibration when driving had caused the coupler to pull apart just enough to kill the camera. This was an easy fix and it works perfect now. I would definitely recommend this camera to a friend.

I just did the installation on my 2012 GMC Sierra 1500. Installation was fairly easy for this broken down man thanks to the video's that you share! I didn't know what the quality of the monitor would be but I was impressed! The small sized monitor will not be in the way of my view. I placed it on the far left side on my dash. Now I can hitch up to my camper without getting in and out of my truck a half dozen times! Thank You!

I installed a backup camera on my 40' 5th wheel travel trailer. LOVE it! Dialed in the guidelines, flipped the image to mirror view and can nail the tight parking spaces like a professional. Lets me keep an eye on the bikes on the bike rack too. The night vision feature is great. The microphone/speaker works well when I need a real person spotting (which is almost never now). Now my wife can just talk to me, no more yelling. Installation wasn't too difficult as the cable fit behind the weather strip along the corners of the coach. If you want to know what's in the blind spot behind you, good choice here. And the monitor has 2 more video connections to use too. Might add a hookup camera next. Anyway, buy it.

I have a pull behind camper and I like to see what is behind the camper as I go down the road. The camera is wired to an AUX switch so I can have it on when I need it. The camera is also great for backing the camper. The monitor is mounted to a block of wood to fit in two of the four cup holders so I can store it when not in use, out of sight.