Most Popular Demco for 1999 Dodge Ram Pickup

The hitch is easy to ensemble. Great design. Pulled my trailer great! But when I hooked up the second time to the trailer the roll pin that goes in the locking bar fell out. Wasn't a really big deal. But if I hadn't had any tools and a 1/4" bolt with a lock nut I probably won't have been able to hook up. Maybe they could change that. The best adapter from gooseneck to fifth wheel.But all in all very happy with it.

Click to Enlarge

The hitch is much heaver and better built than it appears in the online photo. It was easy to install over my gooseneck ball took less than 20 min. rides nice with almost no noise. The set up also has about 3" of offset this was nice as I pull with a 6.5 bed ram 2500.

Put this setup on a 2021 pj flatbed with a recessed gooseneck (believe it's a b&m 30k kit) in it from the factory. The top of the ball is about 1/8"-3/16" lower than the deck. Took a few tries to make everything fit along with some modifications to the set screws. I had to trim off about 1/4" on the bottom set screw to clear my opening. Also I can't set the 5th wheel height to the lowest setting because the upright casting sticks out the bottom of the frame. One could trim that off as well but then you lose the hole for the highest setting. Gonna run in the middle setting and if I have to, I'll trim off the excess to make it sit lower. Bed is on a 2014 Ram 4500. Top of bed to ground with no load is 41.5" at the rear axle. Overall looks like it will work for what I'm doing.

The hitch is easy to ensemble. Great design. Pulled my trailer great! But when I hooked up the second time to the trailer the roll pin that goes in the locking bar fell out. Wasn't a really big deal. But if I hadn't had any tools and a 1/4" bolt with a lock nut I probably won't have been able to hook up. Maybe they could change that. The best adapter from gooseneck to fifth wheel.But all in all very happy with it.

Click to Enlarge

This hitch mount is great! I can now swap over from my 5th wheel hitch to a gooseneck in minutes. This is a great product. I had a gooseneck hitch already installed in my pick up but needed to tow my 29 foot 5th wheel. I other mounts to install the 5the wheel to my 2013 Ram but the gooseneck hitch mount was in the way. Found this set up on line at etrailer.com . Fast shipping, Ez to get my order in. 100 % satisfied. Plug and play. Took less than 10 minutes to install.

This product worked great. Used it in a 2016 Ram 2500 4x4 with the B&W turnover ball. The only problem is the safety chains for the B&W wont let this set flat against the bed of the truck. I solved this problem by using a heavy duty 1/4 inch rubber bed mat between the bed and this bracket and cut the rubber around the B&W hole and safety chains. That helped take up the extra space and helped to protect the spray in bed liner from being rubbed. Had no problems towing my fifth wheel and was happy I don't have these rails permanently mounted in my truck bed.