Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Proudly display your patriotism while piloting your pontoon boat with this USA flag kit. Mount socket on your pontoon boat's railing and insert flag pole. Kit includes mounting clips and a 12" x 18" US flag. Made in the USA.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey, everyone. I'm Ellen here at etrailer.com, and today we're taking a look at the Taylor Made pontoon flagpole with US flag. This flagpole is going to measure 24 inches long, and it's designed to work with a pontoon boat, so it's meant to mount to your pontoon boat railing. And, basically, we'll have these two clips to keep our flag in place, and also comes with our American flag. So I'm just going to unfold this. They have thoughtfully folded it in a traditional style there.
So once you unfurl your flag, it's pretty nice heavy-duty material, really nicely stitched as well, so I think it's going to stand up for a long time. We won't have to worry about our American flag getting raggedy anytime soon. And it looks nice from both sides. So there's not one side of this that's going to be the one that looks fancy. Both of them are pretty nice looking there.
So definitely a patriotic addition to our boat.Also comes with two screws to get this attached to our railing. So we'll also have a detachable flagpole there. So that's just two D10s on either side. We can push in to get that installed into the holder that comes with it. Now, this does have a little bit of an angle to it, so it's angled out at 10 degrees to kind of angle it so that the flag can wave as you're going down the river or down any kind of lake.
So we'll zoom out a little bit so we can actually see what this is going to look like. And I'm going to install my flag on here just so you can get an idea how that's going to work. These hooks are made of plastic, so they have a little bit of a bend to them, so you can just kind of pull them up and out of the way to get that flag in place.And then we'll have it hanging there. There's also a little rubber stopper to make sure that our flag is sitting nice and taut on the flagpole, so it'll hang out pretty nicely. Looks pretty nice.
I think that this is a great addition. It's heavy-duty. It's kind of crinkled right now, but I think once it's out in the sun and in the wind, it'll smooth out a little bit. But I kind of like that it's heavy like this, so that gives me some confidence that it's not going to fade anytime soon. It's thicker fabric than I actually first thought, so. The stitches are all really nicely reinforced. Again, I like that all the stars are nice and neat. Those are handsewn. So I think this is just going to look really nice on your boat.And these clips, easy to adjust, easy to remove. So whether you want to switch out the flag for anything else, it should be pretty easy to do. Now, as far as measurements are. Flagpole, again, 24 inches long. So that's going really from where it attaches into that holder to the top of the little knob. With our holder, the total is 25 inches, so a little bit taller. Our flag measures about 12 inches by 19 and a half. So pretty good size for our flag there.These little clips come off of our flagpole by about two inches. The foot on our holder is a total of four inches wide from end to end. The distance between those mounting holes, center-to-center, is about two and 7/8 inches. And I'll just attempt this real quick. And then it's about an inch and 1/16-wide at the base. Stands about one and a half inches tall. The screws that come with this, measuring from the head down, are about an inch long. So it should give you enough of a bite to keep that secure. That's going to do it for our look at the Taylor Made pontoon flagpole with US flag.
Ratings & Reviews
This is a high quality product at a low cost. Arrived ahead of schedule in time for me to teach Scouts signal flags! Bravo Zulu, Taylor Made and etrailer!
Came on time. Very nice set of flags.
Great product and very easy to order... Thanks!
came as advertised
12”x18” flags were of really good quality and shipping was quick.
Not only is this flag very sturdy, but it's the right shape! The dimensions, the ratio between the height and the width (the "fly"), are spot on. To others looking for a proper "Courtesy" flag, don't be put off by that "19", as that's with the good binding added, for the grommets.
Just what I ordered and as described. Looks like nice quality. Grommets appear to be securely fastened. I wholeheartedly recommend this Taylor Made boat flag.
They advertise these as boat flags. I use them on my snow plow one on each side as edge markers. It’s just a snow plow for my pick up but I like having the flags on there and every year I have to replace them under normal circumstances but with these flags, I do not have to replace them this year after year on the plow. They look great, and they’ve held up well.
We live on a 540 acre all sports private lake in the state of Michigan. Instead of flying the American flag like others along the shore line we are flying our last name of Seymour spelled out. Not sure how many boaters that cruise by know what it says, but we do! And we get a lot of compliments on these flags. Thanks
The flag is spectacularly beautiful with vivid color. I’ve taken it out several times now and have not had any quality issues. So far, I’m loving it.
I've spent the past 5 months, completely refurbishing a 1958 Arkansas Traveler 14ft alum. V-hull boat and a 1988 Holsclaw Bros trailer. During that time I've placed at least a half dozen orders from etrailer, as they simply have a vast variety of items and and their website is fantastic, easy to use and their deliveries are prompt and efficient. This flag was the last item I added to this project and being retired military, I think it dressed up the vessel beautifully and I can't wait to see it waving in the breeze during the fall fishing season here in NH!
Order came in alright, but months later than I expected.
Looks great, performs great, very easy to install.
Quality flag and pole setup
Nice flag, embroided not printed. Design allows flag to be used with provided pole or on the Pontoon's anchor light pole.
Have had this product, flag for one year and it is doing great. Mounted on our Skiff no issues with mounting or fade so far.
Do you have a question about this Boat Flag?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rick
5/11/2022
Still looks like new, no issues great boat flag kit!