To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
You hit the brakes and feel it - gear sliding in your truck bed. A propane tank rolls, paint cans shift, and now you have a big mess. Tmat keeps everything in place, and when you need something, slide the mat out and grab it without climbing in.
A truck bed is flat and wide open, which means all your gear slides around unless you strap it down. And most of the time, that's easier said than done. You toss in a propane tank, a cooler, cans of paint, maybe a few tools, and by the time you hit the first corner, it's all shifted. The tank's rolled up by the cab, the cooler slid sideways, and your truck bed and tools are now the same color as the paint that just spilled. Now you're forced to climb in to straighten it all out, and that's how you tweak your back or bang a shin on the tailgate. It doesn't take much before the whole setup becomes a pain to deal with.
Tmat fixes that without changing how you load your truck. You still toss in your gear like always, but now it stays put. The Tmat system includes three types of blockers, each made for a different kind of gear. Stout Stationary Blockers are the taller ones, built to brace larger items like propane tanks or toolboxes. Quick-Fit Stationary Blockers are shorter and work well for tool bags, buckets, or other gear that tends to slide around. Adjustable Blockers give you the most flexibility, sliding open or closed to hold odd-shaped or uneven items when nothing else fits quite right. When your setup changes, just move the blockers to fit. Everything stays where you put it and nothing gets spilled or damaged.
And when you need to grab something, you don't have to climb into the bed to reach it. Just slide the mat out and your gear comes with it. No crawling in and no unloading half the truck to get to the front. The Tmat pulls out as far as you need, but it's best to stop short if you're carrying heavy gear. Because the mat is flexible, anything too heavy that slides past the tailgate will tip or fall. Keeping the weight on the bed or tailgate keeps everything stable and still easy to reach.
Speaking of keeping your gear safe, the good news is if you use a tonneau cover, the Tmat won't interfere at all. It sits low in the bed and the blockers stay out of the way, so you can close the cover like always. Other systems take up too much space and force you to leave the cover open or take it off. With Tmat, everything works like it should.
If it fits that cleanly under a tonneau cover, it's no surprise it works just as well in other spaces too. Tmat is built for more than just truck beds. You can drop it into a van, trailer, or SUV by changing how it's put together. It even works around gooseneck hitches. The panels snap together in different configurations, so you can build the shape you need and still use the blockers to keep gear from moving. You get the same setup and the same benefits, just shaped to match whatever you're driving.
Warning: Large or heavy items may need additional tie-downs or ratchet straps.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steven here with etrailer.com. Today we're looking at our Tmat slide-out truck bed mat and organizer for your full-size trucks with short beds, specifically five-foot-five, or five-foot-to-five-foot-five, full-size trucks with short beds. So folks, this is gonna be great for keeping your gear from shifting. The Tmat blocker system braces your cargo so cans, boxes and tools simply just stay put. With over 700 connection points when it's installed, it's gonna let you use blockers where you need them for any-size load. And as you see in the top-right photo, you could potentially use these around goosenecks, maybe even fifth wheels, depending on if you have the ISR pucks and those kind of things.
So keep those kind of things in mind. Now, what do I mean by blockers You have these tall blockers, you have short blockers, and you have these adjustable ones that you can simply squeeze and then push out, pull out, and give you a nice flat edge for maybe a box with the side of something. And what you're gonna get is 20 of these 12-inch-by-12-inch Tmats. And these are 3/4 inch thick, heavy-duty plastic. You've got some notches here on the top.
And then on the side, you have the corresponding slots. Those would simply marry together, like so. And you could either push them down by hand or use the included mallet that comes with it to assemble. And then you're gonna get 13 of these 12-inch-long-by-two-inch-by-3/4-inch-thick strips, and those are gonna be like your side panels to help fill in space. So it's gonna work great in vans, SUVs, trailers, truck beds, like I mentioned.
No tools required. Obviously you have a mallet included. No drilling, just piece it together, drop it in, start organizing. So you can do it multiple ways. I've found it's pretty easy, honestly, just to push them together by hand and they hold tight.
And they got a little flexibility to 'em. And when you shake 'em, they're not falling apart. Again, you could use the mallet if you need to. There's gonna be a couple, I'm sure, when you get to these where it may be just a tight fit, but honestly, so far, I've found that they just hold really good just by simply placing 'em in with your hand. You just wiggle 'em with a little force to come back out. Same thing with these, just a little force. These, it is a little easier to flip 'em upside down, light tap with the mallet, and it pops it right out so you can move it around again. The possibilities are truly endless with these, folks. They're gonna have lots of ways to put gear, stabilize it. All these are sold separately as well as far as your blocker systems, the short, tall, and these guys here. And we even have some little-bitty square ones that are like singles that you could put in there as well. So lots of possibilities. You could reach out to us by phone, chat, or email, we'd be more than happy to assist you with any additional needs. Cleanup's a breeze with a power washer, hose, a broom, a vacuum, a leaf blower, maybe you got some debris in the back. So really simple to work with. And you could even potentially slide these out when they're all connected to get to gear that's maybe deeper in the truck bed as well because they do slide pretty easy on the truck bed as far as that goes. If you have a rubber mat down, they do hold a little better as far as that goes. So kind of keep that in mind as well. But again, no drilling required. There are holes in these long ones. If you so choose, you could potentially screw those in place. Totally up to you though, you don't have to. Folks, that's gonna wrap it up for our look together. I'm Steven, thanks for watching.
Works as advertised.
I did receive the shipment Thanks. There are not any tiles with the handles. Without them, the edges are sharp.
I got to test out the sample that we received of this product, and it's been great! I use my truck for everything from the weekend get away with the family, to hauling my gear and dog on hunting trips, and keeping things from shifting around in the truck bed has been game changing. This system kept my gear organized and me worry free. Definitely recommend!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.