Video Transcript for Complete Breakdown of the Redarc RedVision Display Unit

Jeff: Hello everybody, this is Jeff at etrailer.com. Today, we're going to take a look at this Redarc red vision display unit. Now this red vision display unit can be used as a replacement or a secondary display for your red vision total vehicle management system. This unit is included with the red vision, total vehicle management system part number R E D 79FR , which we do sell separately on our website. This part will include everything I laid out here on the table. The 4.3 inch display the display facia, the optional mounting spacer, a five mil or a five meter, R-Bus cable, and then an R-Bus terminating resistor also comes with this nice quick start guide that'll show you and tell you how this operates.

Now this display unit has the 4.3 inch screen allows you to control multiple onboard devices and give you the visibility of your water tank levels and your battery power.This also can be retrofitted to work with the manager 30 battery management system. We do sell separately, which is part number 331-BMS1230S2-NA. A few specs on this, I just want to give you the measurement on the unit itself. The width from one end, all the way to the other end is right at six and five eighths inches wide. Overall height, bottom to the very top is four and one eight inches tall.

And the thickness of it at the widest point, this part sticking out, is going to be right at one inch thick. But that should do it for the review on this Redarc red vision display unit..