Black Trim Ring for Odyssey Interior Light - Snap On

Video Transcript for Ultimate Overview of the Black Trim Ring for Odyssey Interior Light

Hey everyone, I'm Ellen, here at etrailer.com. Today we're taking a look at the Black Trim Ring for Odyssey Interior Light. Now, this is just going to be a little snap-on ring to go over your light to kind of finish up the look. Typically, we'll have some little mounting holes on our light that just doesn't look quite as clean as our little snap ring.So, that Odyssey Interior Light is just a swivel light for our interior on our vehicle, whether that's an RV or camper or whatever the case might be. It should look like this. So, we also sell this here at etrailer.com if you need to pick one up.

That part number is R-V-I-L-0-6-0-1. And it will have that little swivel, snap on snap off, or click on click off for that function depending on how you have it wired.So, the snap on ring just goes over the top and snaps down in place. So, it looks pretty nice. Again, it just covers up those mounting holes so that it's a little bit more clean and should fit pretty much the exact same mounting position.It doesn't really add a lot of length to our light, but let me give you some measurements, just all the same. So, it's about five and a quarter inches long by about three and a quarter inches tall.

The mounting trim ring, or the front of our light, that's actually going to stick out away from our mounting position, that's about three quarters of an inch. So, which is pretty similar to what it is without that snap ring or that trim ring in place.Now, again, the light is sold separately, but you can find that here at etrailer.com. To take it off, you pretty much just have to pry around it. And actually it's holding on pretty good, so I'm just going to leave that on there, but it should clean up the look of your install and make it look a little bit nicer. That's going to do it for our look at the Black Trim Ring for the Odyssey Interior Light..