ARC Concept LED Pod Light - Spot Light - 40 Watts - U-Bracket Mount - 3" Cube - Qty 2

Video Transcript for Review of ARC Off Road LED Lights - Vehicle Lights - ARC53RR

Hello, everybody. This is Jeff for etrailer.com. Today I'm gonna take a look at the ARC Concept, 3 inch cube bracket mount, LED spotlights, for a quantity of two. Now, these are a super bright LED spotlight that'll produce 3000 lumens, which is 1500 per light and it gives you a narrow beam light for improved visibility and safety. It is a high quality light output, from four 5 watt LEDs per light. And it gives you a 15 degree narrow beam, which is ideal for industrial fleet and commercial applications.

The TIR projector lenses produce a nice crisp narrow beam. I do have this hooked up to some 12 volt power. I do wanna turn it on just to show you how bright the light is. So if we go ahead and turn on our lights, you can see that and I'll go ahead and turn off the overhead lights and you can see there's the spotlight beams that they give off. And again, it's a very bright white light.

And again, what I'm gonna do is zoom out just so we can show you from the distance. We turn them around, you'll be able to see the spot beam it produces. We'll go ahead and turn back on our overhead lights, turn off our power. Now, these do use a durable polycarbonate lens, which is impact and shatter resistant. The housing they're in is a black powder coat aluminum housing, it'll resist corrosion and it even helps dissipate the heat buildup.

It is IP67 rated, protects against dust and moisture and it is a very easy installation with the included components here on the table. It includes the two cube LED pods. You can see the mounting brackets I've already installed. It's two U bracket mounts, one on each, right And then the mounting hardware for installation. Now, these are a 3 inch square compact light, you can mount it to the roof, the roll bar, grill guard or bumper for a nice rugged look, and the mounting bracket we mentioned it's a universal single bolt mounting bracket, provides a sturdy mounting base.

Now, what's nice about it, when it's installed, you can see that you can still angle your light where you need it to be. Now, to install this, it will require a wiring harness to connect this light to your battery. We do sell that wiring harness separately on our website. It's part number ARC86RR. And I just wanna pop up an insert, that's what the wiring harness would look like. And basically, it'll plug into the lights and in the other end, you could see the two lead wires will go to your battery and it even includes a rocker switch to turn the lights on or off. Few specs on this, the quantity is for two pods, the lumens, again, is 1500 per light, so 3000 total. Four LEDs per light, 5 watts per LED. So that gives you a wattage per light of 20 watts, at 13.6 volts DC. And the last thing I want to zoom in, to give you the dimensions on the lights. Gonna be 3 inches wide by 3 inches tall and the total depth on the light, right at 2 5/8 inches. But that should do it for the review on the ARC Concept, 3 inch cube bracket mount LED spotlights for a quantity of two..