Replacement T-Slot Rails For RetraxPRO MX Hard Tonneau Cover # 80481

Question

Question:

Will this work with the RetraxPRO MX Tonneau Cover Part #: RTX-80481?

asked by: Joseph M

0

Expert Reply:

No, the correct replacement t-slot rails for your RetraxPRO MX Hard Tonneau Cover # RTX77FR can be found with part # RTX39FR.

expert reply by: Kevin C

0

Answer 1

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

view full answer...

Answer 2

The correct Replacement Side Rails for the RetraxPRO XR Hard Tonneau Cover part #RTT-80373 on a 2015 Ford F-150 with 5-1/2' bed is part #RTT-82381.

view full answer...

Answer 3

The part #RTT-82381 that you referenced is a trax rail replacement for a RetraxONE part #RTT-60373 which fits 2015 to current Ford F-150's with a 5.5 foot bed and provides the T-slots you are looking for to mount crossbars. Based on the part…

view full answer...

Answer 4

The Curt A16 5th Wheel Trailer Hitch w/ Slider #C16520-16020 weighs approximately 254 pounds and the Curt Q20 #C16530-16020 weighs in at 278 pounds. The Demco Hijacker Autoslide 5th Wheel Hitch #DM8550024 is a bit heavier than both the Curt models at…

view full answer...

Answer 5

The total weight of the Demco Hijacker Autoslide 5th Wheel Hitch #DM8550024 that you referenced is 289 lbs. It comes apart in a few pieces pretty easily to make assembly and disassembly easier.

view full answer...

Answer 6

The height adjustment for the Demco Hijacker Autoslide 5th Wheel Hitch with Slider - Ford Super Duty Prep Package #DM8550024 (18,000 lbs) and #DM8550038 (21,000 lbs) is found in the "Side Rail Assembly Instructions" of the hitch. I have cut…

view full answer...

Answer 7

While the best and most certain way to tell if your 2018 Ford F-250 has the puck system is to call your local Ford dealer with your VIN, it should be pretty easy to tell otherwise. If your bed looks like the accompanying photo - with four accessible…

view full answer...

Answer 8

Yes, you can replace the side rails on a RetraxONE MX Hard Tonneau Cover with the RetraxONE XR Hard Tonneau Cover Rails to gain the t-slots. For a 2016 Ram 2500 6-1/2' bed you'll need the Replacement Side Rails for Retrax XR Series Hard…

view full answer...

Answer 9

I confirmed with Retrax that you can use the XR T-slot Rails on your Retrax One tonneau cover as long as your 2014 Ram 1500 does not have the RamBox. You can use Replacement Side Rails for Retrax XR Series Hard Tonneau Covers - T-slot Style #RTX59FR.…

view full answer...

Answer 10

To upgrade the RetraxPRO MX Hard Tonneau Cover #RTX77FR on your 2020 GMC Sierra 1500 with 5-3/4' bed to the RetraxPRO XR Hard Tonneau Cover w/ Trax Rails #RTT-80481 you just need the Side Rails #RTX39FR. These 2 tonneau covers are the same exact…

view full answer...

Answer 11

Unfortunately Retrax does not offer a way to upgrade the rails of the covers to have the T-slots like you are wanting if the cover didn't come with them. Instead you'd have to remove the cover you have now and go with a new one that does have…

view full answer...

Answer 12

Thanks for all of the information! Since your 2022 Chevy Silverado 1500 LTD has the shorter 5-3/4' bed (a little shy of 70") you need these side rails to convert to the XR with the T-Slots: - Replacement Side Rails for Retrax XR Series Hard…

view full answer...

Replacement T-Slot Rails For RetraxPRO MX Hard Tonneau Cover # 80481

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching