Shortest In-Use Length of Shock Strap

Question

Question:

Good afternoon I am interested in buying a set of 6 ShockStrap units 2,000 lb rating with the 2 in by 9 ft strap - dont you have anything with less than 9 feet? My application use will be for one purpose only and the length I need is no more than 5 ft. Advise please - I need to either buy these or pass and go elsewhere.

asked by: John F

0

Expert Reply:

I ordered the 2-inch by 9-foot # 297-9RSDB ShockStrap from the shipping facility to take some exact measurements. The shortest length measured from hook to hook is 27-1/2". If you use the soft straps the shortest length is 41".

I have included a link to this product page and a picture with dimensions for your review.

expert reply by: Les D

0

click to enlarge

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Hey Lorie, we have a similar hitch extender that will work great for you with the Gen-Y part #GY89SR which is a 14 inch extender but the Blue Ox you mentioned can't be used when towing a trailer.

view full answer...

Answer 3

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 4

The ShockStrap Ratchet UTV Tie-Downs part #297-7RSBB-UTV are what I recommend to secure a Polaris RZR as the 1,000 lb weight capacity per strap will be more than enough for the weight of the RZR. These are an excellent option that have built-in shock…

view full answer...

Answer 5

I may have a solution for you, but B&W does not make a Biker Bar that is compatible with Indian motorcycles. However, you can use something like the Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4…

view full answer...

Answer 6

In regards to the B&W Tow & Stow 3-Ball Mount part #BWTS10048B for 5" or part #BWTS10049B for 7", the distance from the top of the shank to the bottom of the upright while the hitch balls are stowed away is 8.5" for the 5"…

view full answer...

Answer 7

The total height of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise #BWTS10037B in the rise position is 9-1/2 inches from the center of the shank's pinhole to the top of the ball (in the highest position).…

view full answer...

Answer 8

I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver…

view full answer...

Shortest In-Use Length of Shock Strap

Product Page this Question was Asked From

Continue Researching