Rack 'em Grass Catcher for Toro Timecutter 75750

Question

Question:

I was wondering if there is a grass catcher for a 75750? Thank you

asked by: Francisco

0

Expert Reply:

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use # RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but has a 4 inch tall discharge you'd use # RCMMS4-EXS1.

expert reply by: Mike L

0

click to enlarge

Answer 1

Hey Jose! Did you mean a Toro GrandStand Multi Force? Do you know what kind of deck it has on it? If it has the regular deck you can use the #RCMMS4-EXS1 and if it is the Z-Cut deck the #RCMMS4-EXS1-TORO. Also, your mower's discharge opening must…

view full answer...

Answer 2

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1. The Z deck has notches or slots in it as…

view full answer...

Answer 3

The Rack'Em Grass Catcher #RCMMS4-EXS1 will work for your Toro lawn mower if it has a regular deck. If your Toro lawn mower has a Z-cut deck you will need The Rack'Em Grass Catcher #RCMMS4-EXS1-TORO. The best way to determine that fit is to…

view full answer...

Answer 4

Based on my research your Toro mower does have a standard deck, so you do have the correct grass catcher: - Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1

view full answer...

Answer 5

Since your Toro has the Z-Cut Deck you definitely want to go with the Rack'em Grass Catcher #RCMMS4-EXS1-TORO over the part #RCMMS4-EXS1. I'm not sure when or why Toro puts the Z-Cut Deck on different mowers but according to your picture that…

view full answer...

Answer 6

Measure the discharge opening of your Exmark Viking Hydro and you'll know which of the two grass catchers is what you need. If you have a 4 inch discharge opening you need the part #RCMMS4-EXS1 or if you have a 5 inch opening you'd want the…

view full answer...

Answer 7

The Rack'em Grass Catcher for Toro Lawn Mower with Z-Cut Deck part #RCMMS4-EXS1-TORO will fit all Toro Lawn Mowers with a Z-Cut Deck. I don't have reference to the deck type on any one particular model but have attached a photo of the Z-Cut…

view full answer...

Answer 8

The Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1 that you referenced is a fit for the Bob Cat mower you sent a picture in of. Since your Bob Cat has a standard dock that discharges even with the rear tires this will…

view full answer...

Answer 9

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1.

view full answer...

Answer 10

We offer 2 different Rack 'Em grass catchers for Exmark mowers. The catcher you need will depend on if the discharge chute is 4 or 5 inches tall. If it's 4 inches, you'd need #RCMMS4-EXS1 or if it's 5 inches, use #RCMMS4-EXS15. Each…

view full answer...

Answer 11

The Rack'em Grass Catcher for Toro Lawn Mower with Z-Cut Deck #RCMMS4-EXS1-TORO will fit your 52 inch Toro Z mower deck if it has the Z-cut deck (it should but you might still check). If you have the regular deck then you will use #RCMMS4-EXS1…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Rack 'em Grass Catcher for Toro Timecutter 75750

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching