Towing Fuses for 2014 Chevy Express Van

Question

Question:

were are the fuses and relays for a 2014 chevy express van. it seems they are labeled wrong from the owners manuel

asked by: Marc

0

Expert Reply:

I can only go by what the owner's manual for your 2014 Chevy Express Van lists and on the online version I was able to pull up it shows the following fuse locations for towing circuits inside the under-hood fuse block:

# 3 position - Trailer Right Stop/Turn
# 11 position - Trailer Wiring
# 21 position - Trailer Left Stop/Turn
# 69 position - Trailer Stop Lamps
# 42 position (J-Case Fuse) - Trailer Wiring

Then inside the floor compartment fuse box, which is located under the driver's seat, there is a fuse in the F5 position for trailer park lamps.

I wasn't able to find any supplemental information online that indicated there were any mistakes inside the original owner's manual for this vehicle. If you can tell me what specific issues you are having I will be happy to help you further.

expert reply by: Chris R

0

Answer 1

Thank you for all of the information and pictures! It looks like you should at least have some wiring already run on your 2019 Chevy Express Van 3500 so I'm just as confused as to why you don't have a round plug with a cap inside the…

view full answer...

Answer 2

First we should make sure we have checked all of the fuses and relays related to the factory tow package wiring on your 2008 Chevy Express van. Under the hood there are the following fuses related to the tow package wiring: Location 8 = right stop…

view full answer...

Answer 3

There are a few troubleshooting steps to help you figure out why you have no power. I would start by making sure that there is not any corrosion or debris blocking your connection points. If they are clean or still no power after cleaning, I would…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

Answer 7

Hey there Lisa, hope you're having a great day. So you actually brought up a really good question. The etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers #e38FV uses a gate that comes down and makes contact with the shank of the bike…

view full answer...

Answer 8

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 9

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 10

Hey Mark, yes you can use the etrailer anti rattle device part #e38FV when towing a travel trailer. It will hold the ball mount that is being used tight to the hitch to eliminate any movement. What travel trailer do you have?

view full answer...

Answer 11

No, Thomas it does not have any weight limitations. The etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers item #e38FV attaches directly to the lip of your vehicle's hitch. Doing so allows it to limit the movement of the ball mount or…

view full answer...

Answer 12

Good afternoon Nathan, that's a great question! You can use the etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers #e38FV with a 3" to 2" reducer adapter like Buyers Products 3" to 2" Receiver Tube Adapter…

view full answer...

Towing Fuses for 2014 Chevy Express Van

Product Page this Question was Asked From

Continue Researching