Air Conditioner and Generator Recommendation For Enclosed Trailer
Updated 07/05/2019 | Published 07/04/2019 >
Products Featured in This Question
Question:
I have a 8.5x24 enclosed trailer with a v-nose and im looking for an a/c unit
asked by: JORDON D
Expert Reply:
I recommend Advent Air RV Air Conditioner part # ACM135C for the 8.5x24 ft enclosed trailer. The temperature range is 65 degrees F to 90 degrees F so it will keep your enclosed trailer nice and cool on hot days. You can also add a heat strip with part # ACMHD for colder days. The air conditioner does require a 14-1/4" long x 14-1/4" wide opening on the roof but there is a thick gasket built into the unit to prevent leaking so there is not a need for any type of sealant. The best part about the Advent Air RV Air Conditioner is it comes with a start capacitor, so the running and starting watts will be 1,450 which means you can use a lower rated generator because there isn't a higher starting watt requirement like air conditioners without a start capacitor.
If you do not already have a generator, I recommend Firman 3,300-Watt Portable Inverter Generator part # FIR54FR with a 3,000 watt running power output which will be more than enough for the air conditioner with the start capacitor.

Continue Researching
- Shop: Brophy Camper Scissor Steps - 4 Steps - Steel - Diamond Tread - 17" Wide - 275 lbs
- Shop: Brake Controller
- Q&A: Troubleshooting A Noisy Atwood Air Command RV Air Conditioner Rooftop Unit
- Q&A: Troubleshooting 13,500 Btu Advent Air RV Air Conditioner Not Blowing Cold Air
- Q&A: Recommended BTU Air Conditioner To Cool 24Ft Trailer In 100 Degree Weather
- Search Results: ductless rv air conditioners
- Shop: MORryde RV Generator Slide Out Tray - 25-3/4" x 26-1/4" - 100 Percent Extension - 300 lbs
- Search Results: power inverter
- Shop: Pro Series Round, Snap-Ring Swivel Jack - Weld On - Topwind - 10" Lift - 2,000 lbs
- Shop: Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Topwind - 10" Lift - 5,000 lbs
- Shop: Round Snap Ring Swivel Jack w/ Footplate - Weld On - Zinc - Topwind - 15-1/4" Travel - 2K
- Shop: Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Zinc - Topwind - 15" Travel - 2K
- Shop: Stackers Leveling Block for Trailers and RVs - 8-1/8" x 8-1/8" - Qty 1
- Q&A: A/C Unit Recommendation for my Enclosed Trailer With Heat Strip