Should I use 8 Inch Drop Ballmount or 10 Inch Drop Ballmount With 9 Inches Between Hitch and Coupler

Published 04/05/2019

Question:

I am interested in the weigh safe 2 ball mount system but am unsure which size to purchase. My hitch is the factory unit measuring 23 inches to the inside top edge of the 2.5 inch receiver and 14 inches to the bottom edge of the trailer coupler with the trailer bed level. I am thinking a 10 inch but am wondering I should use an 8 inch since I fall between the two at 9 inches. Thanks for the input.

asked by: Steven J

Helpful Expert Reply:

The general rule is to get a ball mount that sits a little higher because the tongue weight of the vehicle causes the ball mount to drop a small amount. You want to be within 2 inches of level with the trailer when towing. Since your 9 inches away from level, I recommend the Weigh Safe 8 inch drop ball mount part # LTB8-25 for 2-1/2 inch hitches to tow level with your trailer.

expert reply by: Heather A