Recommendation for a Hand Winch to Lift For Deer Feeder Poles To Raise 320 Pounds  

Question:

Expert Reply:

I spoke with another member of our content team who uses a similar winch for deer feeder poles. He informed me that the item you selected, Fulton Single Speed Winch - 8 Long Handle - 1,300 lbs, part # FT13000301, will work fine.

Another winch that will work for your application is Dutton-Lainson Hand Winch with TUFFPLATE Finish, Single Speed - 900 lbs, part # DL15002.

When using either winch, for safety, you will want to make sure that nobody is standing under the barrels when they are being hoisted.

For a winch cable, I would recommend Hand Winch Cable with Safety Hook 3/16 Diameter x 25 Long - 1,800 lbs, part # DL24043.

Both winches, part # FT13000301 and part # DL15002 are made in the USA.

I have linked an FAQ on hand winches that you may find as a good reference.

expert reply by: Reno H

0

Tom L.

11/5/2010

I asked and you gave me good advice on a winch for my deer feeder poles. You recommended a 900# DL15002. I see it is a 3.2:1 ratio. Will the 320# feeder lift, will this ratio turn as easily as a 4.2:1? This smaller ratio just means it will take more turns but will still be approx the same ease of turning????

Reply

Reno H.

11/5/2010

The larger ratio of the Fulton Single Speed Winch - 8 Long Handle - 1,300 lbs, part # FT13000301, with a 4:1:1 ratio will be easier to turn but will require more revolutions. The smaller ratio of Dutton-Lainson Hand Winch with TUFFPLATE Finish, Single Speed - 900 lbs, part # DL15002, with a ratio of 3:2:1 will be slightly harder to turn but will require less revolutions. I would recommend the Fulton Single Speed Winch, part # FT13000301, as it has a greater capacity and will be easier to wind.

Reply