Videos
for Command Electronics
Help Articles
for Command Electronics
Expert Answers
for Command Electronics
When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack…
view full answer...Yes, the Solera Slide Topper part #LCV000168106 is the correct fit for your flange width of 90-1/2 inches. This specific model has a box width range of 86 to 91-3/4 inches which is perfect for your width listed.
view full answer...According to my research, your 92865A-1 hub/drum has a 25580 inner and an 14125A outer bearing and a 8 on 6-1/2 inch lug pattern, as does the AxleTek #AKHD-865-7-2-K hub drum you referenced. The #AKHD-865-7-2-K would be an acceptable replacement…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area…
view full answer...I recommend to use the Solera 16-1/2' Slider part #LCV000435661 which matches the boxes width exactly so you will not have side overhang like we normally recommend but it is the biggest slide topper available to fit the 198" width of your…
view full answer...If you check out the picture I attached you can see that the roller and slide out awning assembly of the Solera RV Slide-Out Awning #LCV000435661 actually will sit below the awning rail so your setup having a tight clearance between the rail and the…
view full answer...We have toppers that'll work for 2 of your 3 sliders. For your 12 foot 9-1/2 slide, use #LCV000168109 which is designed for slides measuring between 152-157 inches wide. The longest topper we offer is for slides 188-193-3/4 inches, so…
view full answer...Yes, the 7-way to 5-way and 4-way Adapter, #C35FR, will work with your 2005 Land Rover LR3 as long as your factory 7-way trailer connector. This adapter was originally designed for certain European vehicles with incandescent tail lights and factory…
view full answer...Great question, we have all that you need to flat tow your 2022 Yukon XL Denali. I will list the items then the details. Blue Ox Base Plate Kit - Removable Arms #BLU58FR. Blue Ox Avail Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10,000…
view full answer...I advise measuring the two spindles that you have and making sure that the parts that you are wanting to interchange will be a compatible fit. I have included a photo that shows where where to take these measurements on your exiting spindles. These…
view full answer...I checked the owner's manual for your 2021 GMC Yukon XL, and yes, it is perfectly fine to flat tow. That being said, you are going to need these components: - A base plate - Tow bars - Braking system - Tow bar wiring - High-Low adapter For a base…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…
view full answer...
What our customers are saying:
"Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair."