Wheel Well Liner Specs:
Features:
Durable plastic rear wheel well guards give your vehicle a finished look while helping to protect the undercarriage from salt and road debris. These impact-resistant guards install quickly and easily.
More Information >Videos
for Wheel Well Liner
Help Articles
for Wheel Well Liner
Expert Answers
for Wheel Well Liner
The Gen-Y Weld-On 2" Receiver Tube #325-GH-003 is 2-7/8" wide on the tube and 3-1/2" wide at the collar. The overall length is 12".
view full answer...Your Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches - 2-5/16" Diameter Ball #C60601 lifts the pin when that lever is lifted. Because that lever is broken off you will need to lift that pin and turn it 90 degrees to…
view full answer...I have a great suspension system for your 2022 GMC Sierra 2500. I recommend the Air Lift LoadLifter 7500 XL Air Helper Springs item #AL57541. They have a 7,500-lb Capacity and are the only air bags compatible with 5th wheel hitches. The 7"…
view full answer...The programmer I recommend for your 2018 GMC Sierra 1500 is the Edge Evolution CTS3 part #EP49YR because it can give you up to 18 additional horsepower and 27 ft lbs of torque. It also has the ability to give you several gauges on the 5-inch…
view full answer...The recommended minimum clearance between gooseneck trailer overhang and truck bed rails is 4-6 inches. I'd recommend 6 inches but a lot of people get by with just 4. Ideally you have at least 6 inches of clearance and the trailer is…
view full answer...The most likely cause of the "no signal" error you are receiving with the Furrion Vision S Wireless RV Backup Camera System part #FOS43TASF is due to an interruption on the camera's power wire. Make sure that the camera is…
view full answer...DOT5 brake fluid is what you'd want to use in the Dexter surge actuator part #DX89FR. If the breakaway pin was pulled it would be replaceable. The breakaway cable is replaceable.
view full answer...To replace your TDE Model LP7000 actuator, I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout item #DX89FR. This coupler is designed to mount on top of a standard 3" wide trailer tongue. It measures right at 3-3/8"…
view full answer...Though I do tend to warn people about the ride getting stiffer when upping the capacity of their leaf springs, you are correct in that you will technically never be fully "unloaded". I do have to mention that this could still…
view full answer...The B&W Ball and Safety Chain Kit #BWGNXA2062 will sit 5-3/4" above the gooseneck ball hole on your 2020 Ram 3500. You will need to add or subtract any difference in the bed height from the top of the bed rails to the top of the gooseneck…
view full answer...You definitely want to keep the same weight capacity leaf springs on both sides; having different capacities will cause uneven wear on the tires and other suspension components. Your 2018 Coachmen Clipper 17BHS will have a 3,500 lb axles, so to…
view full answer...We do have an option for a 3-ball mount that fits 3 inch trailer hitch receivers like you have on your 2021 Ford F-250 Super Duty. This is an adjustable ball mount made by B&W: - B&W Tow & Stow 3-Ball Mount - 3" Hitch - 4-1/2"…
view full answer...Filter Products (2)
Contact and Help
What our customers are saying:
Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!
Ryan
Portland, OR