Front Mount Trailer Hitch Installation - 2007 Chevrolet Silverado New Body Video

Due to the design of the front of your 2005 Chevy Silverado 3500 the only place you'll be able to have a front hitch opening is below the front fascia like where the Curt #31108 installs. This would be best option we have, but if you really…

The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #31322 is custom-made and is confirmed to fit your 2007 GMC Sierra new body style. This is not made to be installed upside-down or reversed in any manner. You may think the 4 bracket…

We do offer two front-mount 2-inch hitches for your 2013 Chevrolet Silverado 1500 including the Curt #31322 that you referenced. We have an installation video showing a 2007 Silverado that you can see by clicking on the included link. Also the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, the B and W Turnoverball rail kit part #BWGNRK1057 that you referenced does fit the 2009 Chevy Silverado 1500 5-1/2 foot bed.

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

If you have a trailer wheel that has a 6 lug setup you are going to have a bolt pattern of 6 on 5-1/2 inches. This is the standard 6 lug wheel bolt pattern that trailer rims have. If you are unsure you can check out the help article I attached that…

There really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle,…

You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…

We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like #WS1434 and vinyl trim like #CAM25103. Since trailer makers do not keep track of…

It is a very good idea to use the a compressor with the Firestone Ride-Rite Air Helper Springs #F2609 on your 2019 Chevy Silverado 1500, as well a no-drill mount kit: - Air Command Compressor System w/ Light Duty Compressor #F2610 - No-Drill Mount…