Optronics Trailer Lights A70GB Review Video

I assume you are referring to butt connectors and if that is the case then these can very well be the cause of your issue as they can trap corrosion over time and cause problems. If you test for power on the wire going into the connector and then…

There would be a noticeable difference if you had both the Aero Pro light #STL37RB and the Glolight, #STL117RB right next to each other. You would notice that the Glolight seams to actually sort of glow rather than just light up. This is due to the…

The #A70GB grommet is meant to fit a 6-11/16 by 2-5/8 inch rough opening. The maximum panel thickness would be right about 3/16 of an inch.

According to Curt, their #C13146 is a fit for all models on the 2020 Acura MDX, including your Sport Hybrid. When installed, the crossbar of this hitch will be fully concealed behind the bumper with the only visible portion of the hitch being the…

I confirmed with our trailer hitch manufacturers that each of the trailer hitch receivers are a fit for the 2020 Acura MDX A-Spec: - etrailer Trailer Hitch Receiver #e98840 - Curt Trailer Hitch Receiver #C13146 The three hitches are the same…

I recommend the treated torx screws for treated wood for better corrosion and rust resistance. The treated torx screws like the Redline 2-1/2 Inch Long Torx Trailer Screw for ACQ Treated Wood, part #TFX150ACQ, are plated with a material that will…

We can get you all the lights you need though it will come in the form of different parts because there isn't a specific "kit" containing everything. For the stop/turn/tail lights you can use the GloLight LED Trailer Tail Light…

Usually a grommet-mount incandescent tail light will be pressure-fitted into the grommet and held there simply by friction from the rubber. If there are no visible screws to allow lens removal and no accessible portion of the light's rear surface…

Thanks for the picture. I went ahead and checked out what we have that matches that style of plug, and unfortunately we do not have anything that matches what you are needing. The closest 3-prong wire we have is the 3-Wire Pigtail for Trailer Tail…

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

I do have options for you but we would not have a direct replacement for your 3,500 Lb Lippert Axle. Instead, we have the Timbren Axle-Less Trailer Suspension System part #ASR3500S05 or part #ASR3500S06 which as the title states is an axle-less style…

We do have a couple of alterative solutions, however we do not carry a replacement that match those dimensions. Instead, I recommend replacing the entire swing down stabilizer with the Stabilizer Jacks #TJ01RT-HD which measures 18" extended,…