Customers compare DW08770 to these similar products
Products Featured in this Video
Hi, everybody. Andy here with the etrailer.com. And today we're gonna take a look at this DECA battery isolator. Now, in a multi-battery system, the battery with the lower state of charge will drain power from the battery with the higher state of charge. This 95 Amp battery isolator protects your starting battery power. So though that no matter how weak your accessory battery becomes, the… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
This has happened a few times before with the 2-Wire RV Propane Gas and Carbon Monoxide Detector - 12 Volt - Black #RS54FR, where someone replaces their old non-functioning alarm with a new one, but the new alarm appears not to work when the RV is…
view full answer...Heavy duty ramp springs #RS16933RH and #RS16933LH install on the hinge of the ramp. I have included a picture of what this looks like for you. Not all trailers are exactly the same but this should give you a general idea of how the springs install.
view full answer...When installing the Deka Battery Isolator - 120 Amp #DW08771 you actually do not tap into the ignition systems. Instead you will run the wire from the alternator to the A post on the Isolator, then run a wire from the number 1 post of the isolator to…
view full answer...Since you will be towing a travel trailer, which is a static load that does not change weights all of the time, I recommend going with leaf springs, see link. If you have a 2 wheel drive model that is not a Pre-Runner, go with #SSA1 for 2,000 pound…
view full answer...There isn't a special kit you would have to use to install battery isolator on your 2015 Toyota Tacoma unless it uses a Delco or GM CS alternator (which isn't likely). So you would use the regular kit, #DW08769.
view full answer...When installing Super Springs Suspension Enhancement, #SSA1, anything that that is in the area where the springs will mount will need to be relocated, if possible, so that the action of the spring does not damage it. I have included a link to the…
view full answer...The Deka Battery Isolator #DW08770 is not vehicle-specific; it will work fine on your 1986 Dodge Ramcharger to protect the truck battery from excessive discharge and to regulate current in a multi-battery system. If your truck has a CS alternator you…
view full answer...I'm happy to help with that isolator and wiring. I checked your invoice and see you went with the Battery Isolation Solenoid #PK5231201. This is a good choice and will need to be mounted to the frame because it uses the mounting holes for ground.…
view full answer...The light that indicates that the 12 volt circuit is hot is normal and it will not drain the battery. Think of it as the battery having a really long positive terminal that just extends to the rear of the vehicle. If nothing is drawing power from it,…
view full answer...The only wires that could be hot all the time on a trailer connector is the 12-volt hot lead, which is usually a black wire, and, if applicable, the auxiliary power wire, which is normally yellow or purple. The blue wire is usually for electric…
view full answer...The Solera Slide Toppers we have available, such as the 10.5' #LCV000168105 that you were looking at, do not include caulk like #0160297 or butyl tape but it can be added with part #CAM25013. The Slide-Toppers include the awning itself, mounting…
view full answer...A trailer mounted battery is typically maintained by the 12-volt accessory circuit from the 7-way trailer connector. If the accessory circuit on your 7-way is live even when the ignition is shut off, it is possible that the battery on your truck…
view full answer...