Tube Step Specs:
Running Boards
Fixed Step
Black
Non-Lighted
Cab Length
Aluminum
6-3/4 Inch Width
Features:
Black anodized aluminum step construction makes the Guardian a standout among running boards. Molded black plastic endcap and trim pieces can be painted to match your vehicle. Includes cab-section boards only.
Installation Notes:
Drilling is required for installation
Tube Step Specs:
Round Tube Step
Fixed Step
Black
Non-Lighted
Cab Length
Steel
3 Inch Diameter
Installation Notes:
No drilling required for installation
Tube Step Specs:
Round Tube Step
Fixed Step
Black
Non-Lighted
Cab Length
Steel
3 Inch Diameter
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tech Tip: Nerf Bars will not fit Z71 models.
Tube Step Specs:
Round Tube Step
Fixed Step
Polished Finish
Non-Lighted
Cab Length
Stainless Steel
3 Inch Diameter
Installation Notes:
No drilling required for installation
Tube Step Specs:
Oval Tube Step
Fixed Step
Black
Non-Lighted
Cab Length
Stainless Steel
4-1/2 Inch Diameter
Features:
The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
Tech Tip: Step Bars will not fit Z71 models.
Tube Step Specs:
Round Tube Step
Fixed Step
Black
Non-Lighted
Cab Length
Steel
3 Inch Diameter
Features:
The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant powder coated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.
Installation Notes:
No drilling required for installation
Tech Tip: Nerf Bars will not fit Z71 models.
Tube Step Specs:
Round Tube Step
Fixed Step
Polished Finish
Non-Lighted
Cab Length
Stainless Steel
3 Inch Diameter
Features:
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Installation Notes:
No drilling required for installation
Tech Tip: Nerf Bars will not fit Z71 models.
Tube Step Specs:
Oval Tube Step
Fixed Step
Black
Non-Lighted
Cab Length
Steel
4-1/4 Inch Diameter
Features:
Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of black powder coated steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.
Installation Notes:
No drilling required for installation
Tech Tip: Oval Tube Steps will not fit Z71 models.
Tube Step Specs:
Oval Tube Step
Fixed Step
Polished Finish
Non-Lighted
Cab Length
Stainless Steel
4 Inch Diameter
Features:
4" oval, stainless steel tubing allows for a wider step pad and a more secure footing. Mirror polished bars feature weather-resistant step pads secured by stainless steel clips for long lasting great looks and durability.
Installation Notes:
No drilling required for installation
Tube Step Specs:
Round Tube Step
Fixed Step
Chrome
Non-Lighted
Cab Length
Steel
3 Inch Diameter
Features:
The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant chrome-plated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.
Installation Notes:
No drilling required for installation
Tech Tip: Nerf Bars will not fit Z71 models.
Tube Step Specs:
Oval Tube Step
Fixed Step
Polished Finish
Non-Lighted
Cab Length
Stainless Steel
4 Inch Diameter
Features:
These 4" oval tube steps make it easier to climb in and out of your truck. Their molded plastic step pads are non-skid for secure footing. Polished stainless steel tubes provide lasting durability. Custom installation kit included.
Tube Step Specs:
Oval Tube Step
Fixed Step
Black
Non-Lighted
Cab Length
Steel
6 Inch Width
Features:
Straight-style, extra-wide step bars give your vehicle a rugged look. Black powder coated steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.
Installation Notes:
No drilling required for installation
Tech Tip: Oval Tube Steps will not fit Z71 models.
Tube Step Specs:
Oval Tube Step
Fixed Step
Polished Finish
Non-Lighted
Cab Length
Stainless Steel
4-1/2 Inch Diameter
Features:
The curved ends on these polished stainless steel step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
Tech Tip: Step Bars will not fit Z71 models.
Tube Step Specs:
Running Boards
Fixed Step
Black
Non-Lighted
Cab Length
Aluminum
6 Inch Width
Features:
The aluminum bases of these step boards are covered in black molded polymer for sure footing. Each board sits close to your vehicle's frame for a streamlined look. Custom mounting kit included.
Installation Notes:
No drilling required for installation
A Gap Strip (# 27-9901) is recommended for this application
Tech Tip: Application does not include Z71 models.
Tube Step Specs:
Running Boards
Fixed Step
Black
Non-Lighted
Cab Length
Aluminum
6 Inch Width
Features:
These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
No drilling required for installation
A Gap Strip (# 27-9901) is recommended for this application
Tech Tip: Application does not include Z71 models.
Tube Step Specs:
Oval Tube Step
Fixed Step
Chrome
Non-Lighted
Cab Length
Aluminum
4-1/4 Inch Diameter
Installation Notes:
No drilling required for installation
Tech Tip: Oval Tube Steps will not fit Z71 models.
Tube Step Specs:
Oval Tube Step
Fixed Step
Polished Finish
Non-Lighted
Cab Length
Stainless Steel
4-1/4 Inch Diameter
Features:
Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.
Installation Notes:
No drilling required for installation
Tech Tip: Oval Tube Steps will not fit Z71 models.
Tube Step Specs:
Running Boards
Fixed Step
Polished Finish
Non-Lighted
Cab Length
Aluminum
6 Inch Width
Features:
These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
No drilling required for installation
A Gap Strip (# 27-9901) is recommended for this application
Tube Step Specs:
Running Boards
Fixed Step
Matte Finish
Non-Lighted
Cab Length
Aluminum
6 Inch Width
Features:
These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.
Installation Notes:
No drilling required for installation
A Gap Strip (# 27-9901) is recommended for this application
Tech Tip: Application does not include Z71 models.
Tube Step Specs:
Running Boards
Fixed Step
Black
Lighted Step
Cab Length
Aluminum
6 Inch Width
Features:
The aluminum bases of these step boards are covered in molded polymer for sure footing. Integrated light assemblies turn on when doors are open. Boards sit close to your vehicle's frame for a streamlined look. Custom mounting kit included.
Installation Notes:
No drilling required for installation
A Gap Strip (# 27-9901) is recommended for this application
Tech Tip: Application does not include Z71 models.
Tube Step Specs:
Running Boards
Fixed Step
Black
Non-Lighted
Cab Length
Aluminum
6-3/4 Inch Width
Features:
Constructed of lightweight, powder coated aluminum, the FX extruded running boards offer simple, secure footing when stepping into or out of your vehicle. The boards feature a black powder coat. Includes cab-section boards only.
Installation Notes:
Drilling is required for installation
Tube Step Specs:
Oval Tube Step
Fixed Step
Polished Finish
Non-Lighted
Cab Length
Stainless Steel
6 Inch Width
Features:
Straight-style, extra-wide step bars give your vehicle a rugged look. Polished stainless steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.
Installation Notes:
No drilling required for installation
Tech Tip: Oval Tube Steps will not fit Z71 models.
Tube Step Specs:
Running Boards
Motorized Step
Black
Lighted Step
Cab Length
Aluminum
6-1/4 Inch Width
Features:
PowerBoards quickly and quietly lower as your doors open and retract as they close, maintaining vehicle's original ground clearance. A natural step distance to the vehicle and built-in LED lights on the running boards ensure safe entry and exit.
Custom Fit Accessories For Your
2007 Chevrolet Tahoe
Filter Products (23)
Contact and Help
What our customers are saying:
Best prices, best products, I'm more than pleased with the site and the whole transaction.
Kenneth
Akron, OH