2011 Ford F-150 Base Plates for Tow Bars

Base Plate Features:

Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.

Installation Notes:

This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. However, safety chain anchor brackets for Sterling cables will not fit. To use with Sterling tow bar the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket. IMPORTANT NOTE: this bracket will not accommodate the Guardian rock shield, Tow Defender, Stowaway or the StowMaster and StowMaster All Terrain tow bars.

Tech Tip: Product will not work on Lariat Limited models.

Base Plate Features:

Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.

Installation Notes:

This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. However, safety chain anchor brackets for Sterling cables will not fit. To use with Sterling tow bar the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket. IMPORTANT NOTE: this bracket will not accommodate the Guardian rock shield, Tow Defender, Stowaway or the StowMaster and StowMaster All Terrain tow bars.

Base Plate Features:

Installation Notes:

Requires some minor drilling

Tow hooks must be removed and remain off the vehicle after installation

The weight of this vehicle is near the Class III, 5000 lb, rating limitations. Some models, depending on options, may well exceed this 5000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.

Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.

Use only with motorhome mount tow bars or the BX8833 or BX88151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 23" or greater spaced tabs. The Adventurer may only be used with baseplates that have 16" – 36" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs.

The BX88152 adapter can not be used with this baseplate

Base Plate Features:

Installation Notes:

Requires some minor drilling

Tow hooks must be removed and remain off the vehicle after installation

The weight of this vehicle is near the Class III, 5000 lb, rating limitations. Some models, depending on options, may well exceed this 5000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.

Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.

Use only with motorhome mount tow bars or the BX8833 or BX88151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 23" or greater spaced tabs. The Adventurer may only be used with baseplates that have 16" – 36" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs.

The BX88152 adapter can not be used with this baseplate

Base Plate Features:

Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.

Installation Notes:

Trimming of spoiler, air dam, grill or plastic fascia may be required on some models of this vehicle.

Base Plate Features:

Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.

Installation Notes:

Trimming of spoiler, air dam, grill or plastic fascia may be required on some models of this vehicle.

Base Plate Features:

Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.

Installation Notes:

Trimming of spoiler, air dam, grill or plastic fascia may be required on some models of this vehicle.

This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. However, safety chain anchor brackets for Sterling cables will not fit. To use with Sterling tow bar the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket. IMPORTANT NOTE: this bracket will not accommodate the Guardian rock shield, Tow Defender, Stowaway or the StowMaster and StowMaster All Terrain tow bars.

Base Plate Features:

Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.

Installation Notes:

Trimming of spoiler, air dam, grill or plastic fascia may be required on some models of this vehicle.

This bracket will accommodate any ROADMASTER motorhome-mounted tow bar. However, safety chain anchor brackets for Sterling cables will not fit. To use with Sterling tow bar the Sterling cable anchors must be attached to the frame of the vehicle or welded to the receiver portion of the bracket. IMPORTANT NOTE: this bracket will not accommodate the Guardian rock shield, Tow Defender, Stowaway or the StowMaster and StowMaster All Terrain tow bars.

Base Plate Features:

Installation Notes:

Bumper fascia must be removed and replaced during installation

Requires some minor drilling

Tow hooks must be removed and remain off the vehicle after installation

Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.

The BX88152 adapter can not be used with this baseplate

Height deviation up to 14" higher on the towing vehicle allowed when used for utility applications only with an Allure towbar

Tech Tip: Product will not work on FX2 or FX4 models

Base Plate Features:

Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.

Tech Tip: Product will not work on Lariat Limited models.

Base Plate Features:

Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.

Base Plate Features:

Fixed brackets provide a secure attachment point for your towbar.

Installation Notes:

Bumper fascia must be removed and replaced during installation

Requires some minor drilling

Tow hooks must be removed and remain off the vehicle after installation

Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.

The BX88152 adapter can not be used with this baseplate

Height deviation up to 14" higher on the towing vehicle allowed when used for utility applications only with an Allure towbar

Tech Tip: Product will not work on FX2 or FX4 models