Base Plates Specs:
Base Plate Features:
Installation Notes:
Front skid plate must be removed (if equipped)
Transfer case must have Neutral option
Vehicle must not be equipped with tow hooks
Tech Tip:
Product does not fit models with UpCountry suspension.
More Information >Base Plates Specs:
Base Plate Features:
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Installation Notes:
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
On the 1991-96 Jeep Cherokees, the plastic under the bumper must be trimmed, and a small bumper strap needs to be cut.
Product does not fit models with brush guard
Tow hooks, if present, will be removed and remain off the vehicle after installation.
More Information >Base Plates Specs:
Base Plate Features:
Fixed brackets provide a secure attachment point for your towbar.
Installation Notes:
Requires temporary removal of bumper/fascia during installation
Installation requires some minor drilling
Requires some trimming of the air dam
Steel belly pan must be removed and remain off the vehicle after installation
Due to the design of the baseplate, a second 5/16" hole can not be drilled to accomodate the RangeFinder II towbar
Product does not fit models with brush guard
More Information >Base Plates Specs:
Base Plate Features:
Fixed brackets provide a secure attachment point for your towbar.
Installation Notes:
Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.
On the 1991-96 Jeep Cherokees, the plastic under the bumper must be trimmed, and a small bumper strap needs to be cut.
Product does not fit models with brush guard
Tow hooks, if present, will be removed and remain off the vehicle after installation.
More Information >Videos
for Base Plates
Help Articles
for Base Plates
Expert Answers
for Base Plates
When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
view full answer...Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…
view full answer...Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…
view full answer...Here are the steps to prepare your 2023 Ford Bronco Big Bend for flat towing. The transfer case and transmission will be in neutral with the ignition off. This information is in your owners manual. Switching Neutral Tow On 1.Switch your vehicle to…
view full answer...Hey Robert, for your 2016 Jeep Wrangler using the Ready Brute Elite II tow bar you can use the Blue Ox Base Plate Kit #BX1126 with the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars #BX88297. From here, to complete your flat…
view full answer...Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…
view full answer...We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options:…
view full answer...There are two options for a wiring harness for your 2020 Chevy Equinox depending on what model you have. If you have LED tail lights you will want the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item…
view full answer...Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A…
view full answer...While we do not have a installation video for the Demco Tabless Base Plate Kit #DM77YV, we do have a video for the Roadmaster Direct-Connect Base Plate Kit #RM97RR which is very similar. I have linked the installation video near the bottom of the…
view full answer...Filter Products (8)
Contact and Help
What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN