Fixed brackets provide a secure attachment point for your towbar.
Requires some trimming of the air dam
The weight of this vehicle is near the Class III, 5000 lb, rating limitations. Some models, depending on options, may well exceed this 5000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.
Specific dinghy towing restrictions apply. They may include specific towing speeds and distances, and/or lubricating the transmission and transfer case with the engine idling, then running selector through the gears. Other restrictions may also apply. Confirm the towability and pre-towing procedures of your vehicle with the owner's manual or contact the vehicle's manufacturer for specific towing procedures
The BX88152 adapter can not be used with this baseplate
Tech Tip: Frame hole measurement is not required for BlueOx products.
Removable drawbars, held in place with a pin and clip, make the baseplates virtually invisible when not towing the car.
Tech Tip: Vehicle must have a 3" measurement when taken from the centerpoint of the lower-most threaded hole, on the frame side, to a center-line dissecting the rear-most elongated hole on the bottom. See diagram on bracket product page.
Designed for full size pickups and SUVs. Heavy duty frames of those vehicles eliminate the need for a crossbar, making installation of the tow bar easier. Removable drawbars make the baseplates virtually invisible when you're not towing the vehicle. MX base plates only work with tow bars that slide into a 2" trailer hitch.
Tech Tip: Vehicle must have a 1-1/4" measurement when taken from the centerpoint of the lower-most threaded hole, on the frame side, to a center-line dissecting the rear-most elongated hole on the bottom. See diagram on bracket product page.