2002 Mitsubishi Montero Sport Salt Spreader

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller,…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

We can get you a replacement for your TDE LP75 disc brake actuator;…

Yes, the Dexter Axle Brake Actuator Coupler part #DX56FR is good for towing a trailer up to 7,500 lbs so it would easily work on yours rated for up to 3,520 lbs. This will fit on a straight tongue that is measures 3 inches wide by 5 inches tall.…

The OEM prep package consists of 4…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

Hey John, so the correct amount of spring bar tension will be based on the…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I have included a picture that shows what Curt hitch #C13140 looks like when installed on a BMW X1. The picture is from the instructions which I have also linked for you. As you can see the receiver opening is the only part visible beneath the rear…

There are 3 soft TruXedo Tonneau covers for the 2003 Dodge Ram short bed. If you have the TruXport, #TX246601 then the replacement cover only is #TX246601-CVR. If you have the Lo Pro QT #TX546601 then the replacement cover only is #TX546601-CVR. If…