Free Shipping on Orders Over $99
What type of roof does your 2013 Toyota RAV4 have?
Factory side raised rails that run front to back
No existing rails or crossbars
Select Vehicle Style:
Complete Kit Includes:
Roof Rack Specs:
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
The Hullaport TH834, TH835, TH835XT, TH835XTR, and TH835PRO will require the use of THXADAPT11 when mounting to AeroBlade or AeroBlade Edge bars
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
The Ride-on Adapter (# TH532) can not be used with the following bike carriers: TH558P
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
Canoes must be 14 feet or less on this application
Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap
Any load/mount extending beyond the rear hatch seam may cause interference
Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accommodates accessories that clamp around bars.
Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.
Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
Clamps directly to edge of roof under the doors. Does not use fixpoint.
The sunroof should not be opened while the rack is installed. Remove rack when not in use
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
This load bar system is designed to be mounted directly onto your vehicle's factory installed raised side rails. 58" load bars and locks are included to complete the roof rack.
Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. Black aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.
These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.
Caution! Proper tower balance and tower placement is critical for this installation. Be sure that racks remain centered on the vehicle throughout installation. Pay close attention to the gold slider positions and increase adjustment post in 1/2 to 1/4 turn increments; as necessary. Alternate between towers until the gold sliders are at equal levels in relation to the hash marks on the towers and the cam covers close with firm and equal resistance.
Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again
This fit requires the use of Q-Tower #Y00124. Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions
Combining the strength of steel with an aerodynamic shape, these innovative crossbars attach to Yakima towers to create a heavy-duty, quiet roof rack. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a strong, stylish roof rack. SmartFill rubber strips in T-slots push down to accommodate carriers and accessories - no need to trim. Full-length bars maximize cargo capacity.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
INXB138 is designated to be the frontmost bar while INXB130 is the rear
INXB130 is designated to be the frontmost bar while INXB123 is the rear
INXB145 is designated to be the frontmost bar while INXB138 is the rear
INXB115 is designated to be the frontmost bar while INXB108 is the rear
INXB108 is designated to be the frontmost bar while INXB100 is the rear
Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. The aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.
This locking, removable roof rack mounts quickly and easily to your vehicle's raised OEM rails. It keeps a low profile with its unique elliptical design. Lightweight aluminum crossbars have T-slots for mounting Rola carriers and accessories.
Custom Fit Accessories For Your2013 Toyota RAV4
2013 Toyota RAV4 Trailer Hitch
2013 Toyota RAV4 Trailer Wiring
2013 Toyota RAV4 Brake Controller
2013 Toyota RAV4 Towing Mirrors
2013 Toyota RAV4 Roof Rack
2013 Toyota RAV4 Trunk Bike Rack
2013 Toyota RAV4 Suspension Enhancement
2013 Toyota RAV4 Transmission Cooler
2013 Toyota RAV4 Performance Chip Tuners
2013 Toyota RAV4 Interior Lights
2013 Toyota RAV4 Exterior Lights
2013 Toyota RAV4 Tire Chains
2013 Toyota RAV4 Vehicle Engine Heaters
2013 Toyota RAV4 Floor Mats
2013 Toyota RAV4 Tube Steps
2013 Toyota RAV4 Vehicle Covers
2013 Toyota RAV4 Grille Guard
2013 Toyota RAV4 Bug Shield
2013 Toyota RAV4 Side Window Vents
2013 Toyota RAV4 Mud Flaps
2013 Toyota RAV4 Lamp Guards
2013 Toyota RAV4 Vehicle Tent
2013 Toyota RAV4 Vehicle Seat Covers
2013 Toyota RAV4 Windshield Wiper Blades
Popular Toyota RAV4 Accessories
Filter Products (33)
Contact and Help
What our customers are saying:
Very fast service. Shipped out an hour after I ordered it.Thanks!!
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com