What type of roof does your 2013 Kia Soul have?
Factory side raised rails that run front to back
No existing rails or crossbars
Complete Kit Includes:
Roof Rack Specs:
Lightweight aluminum crossbars and locking Rhino-Rack 2500 Series legs create a roof rack for your vehicle with a naked roof or fixed mounting points. These durable, Euro-style square bars install easily and work with most clamp-on accessories.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.
Roof rack is not intended for off-road use
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars
HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap
Any load/mount extending beyond the rear hatch seam may cause interference
Boa bike mount will not work due to crossbar spread limitations
Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
This load bar system is designed to be mounted directly onto your vehicle's factory installed raised side rails. 50" load bars and locks are included to complete the roof rack.
Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. The aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.
Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. Black aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
This locking, removable roof rack mounts quickly and easily to your vehicle's naked roof with custom-fit clips and keeps a low profile with a unique, elliptical design. Crossbars include T-slots for mounting Rola carriers and accessories.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
This removable roof-rack system mounts quickly and easily to your OEM raised side rails and keeps a low profile with a unique, elliptical design. Crossbars include universal T-slots for mounting Rola and other manufacturers' accessories.
Custom Fit Accessories For Your2013 Kia Soul
2013 Kia Soul Trailer Hitch
2013 Kia Soul Trailer Wiring
2013 Kia Soul Towing Mirrors
2013 Kia Soul Base Plate for Tow Bar
2013 Kia Soul Vehicle Tow Bar Brake System
2013 Kia Soul Vehicle Tow Bar Wiring
2013 Kia Soul Roof Rack
2013 Kia Soul Trunk Bike Rack
2013 Kia Soul Transmission Cooler
2013 Kia Soul Performance Chip Tuners
2013 Kia Soul Vehicle Lights
2013 Kia Soul Tire Chains
2013 Kia Soul Fluid Filters
2013 Kia Soul Vehicle Engine Heaters
2013 Kia Soul Floor Mats
2013 Kia Soul Vehicle Covers
2013 Kia Soul Side Window Vents
2013 Kia Soul Lamp Guards
2013 Kia Soul Vehicle Seat Covers
2013 Kia Soul Replacement Mirrors
2013 Kia Soul Windshield Wiper Blades
Popular Kia Soul Accessories
Filter Products (23)
Contact and Help
What our customers are saying:
Thank you very much, Great service!!!!!!!!!!