CALL NOW - 800-298-8924
Product Experts Available Now!
Free Shipping on Orders Over $99
What type of roof does your 2013 Ford Escape have?
No existing rails or crossbars
Factory side raised rails that run front to back
Complete Kit Includes:
Roof Rack Specs:
Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
Designed for models with a glass roof or sunroof.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
The Hullaport TH834, TH835, TH835XT, TH835XTR, and TH835PRO will require the use of THXADAPT11 when mounting to AeroBlade or AeroBlade Edge bars
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
The Ride-on Adapter (# TH532) can not be used with the following bike carriers: TH558P
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accommodates accessories that clamp around bars.
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
For a secure fit pull down door frame seals enough to insert the clip against underside of raingutter, trim, and/or roof
Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again
Any load/mount extending beyond the rear hatch seam may cause interference
Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side
Foam blocks limit capacity to one boat per vehicle
Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. The aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.
TH7503 is designated to be the frontmost bar while TH7502 is the rear
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
This locking, removable roof rack mounts quickly and easily to your vehicle's raised OEM rails. It keeps a low profile with its unique elliptical design. Lightweight aluminum crossbars have T-slots for mounting Rola carriers and accessories.
This load bar system is designed to be mounted directly onto your vehicle's factory installed raised side rails. 58" load bars and locks are included to complete the roof rack.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
Canoes must be 14 feet or less on this application
The sunroof should not be opened while the rack is installed. Remove rack when not in use
Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. Black aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof
Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
Easy-to-use roof rack clamps to your vehicle's elevated, OEM side rails. The square, steel crossbars can accommodate a variety of accessories such as bike racks, ski carriers, and cargo baskets.
Product not intended for models with a glass roof or sunroof
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Only INXA attachments are usable. INA attachments do not have enough space between the vehicle roof and bottom of crossbar for proper fit
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
Custom Fit Accessories For Your2013 Ford Escape
2013 Ford Escape Trailer Hitch
2013 Ford Escape Trailer Wiring
2013 Ford Escape Brake Controller
2013 Ford Escape Roof Rack
2013 Ford Escape Trunk Bike Rack
2013 Ford Escape Cold Air Intake
2013 Ford Escape Exhaust
2013 Ford Escape Suspension Enhancement
2013 Ford Escape Transmission Cooler
2013 Ford Escape Performance Chip Tuners
2013 Ford Escape Vehicle Lights
2013 Ford Escape Tire Chains
2013 Ford Escape Vehicle Engine Heaters
2013 Ford Escape Floor Mats
2013 Ford Escape Tube Steps
2013 Ford Escape Vehicle Covers
2013 Ford Escape Bug Shield
2013 Ford Escape Side Window Vents
2013 Ford Escape Mud Flaps
2013 Ford Escape Lamp Guards
2013 Ford Escape Vehicle Tent
2013 Ford Escape Vehicle Seat Covers
2013 Ford Escape Windshield Wiper Blades
Popular Ford Escape Accessories
Filter Products (32)
Contact and Help
What our customers are saying:
Easy place to shop. Fast delivery and great products. Very happy with my purchase.
Boynton Beach, FL