Free Shipping on Orders Over $99
What type of roof does your 2011 Mazda CX-7 have?
No existing rails or crossbars
Factory side raised rails that run front to back
Complete Kit Includes:
Roof Rack Specs:
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
This system attaches to OEM fixed mounting points on your vehicle's roof
This vehicle comes with preset mounting points designed by the automobile manufacturer. Refer to load carrier instructions for correct load carrier placement
This fit application requires specific mounting positions which may be incompatible with the hole patterns on some luggage boxes. Additional holes may be drilled in some boxes
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
Installation of this rack will require the removal of the factory installed rack/rails (if present)
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars
HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars
Canoes are limited to 14 ft or less on this application
Use M6x40 mounting hardware for this application
When open, sunroof may interfere with some accessories
The rubber/chrome door seals and/or trim may deform or be damaged under prolonged contact with any roof rack towers and/or clips. Remove rack when not in use
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
Due to crossbar spread limitation, Kayak Stacker is not recommended on this application
Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap
The roof and/or trim is very soft. Do not over tighten or overload the rack
Long loads will prevent rear hatch from opening
Boa bike mount will not work due to crossbar spread limitations
Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Roof rack is not intended for off-road use.
Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories.
Low-profile, aerodynamic crossbars strap to your vehicle's OEM fixed mounting points or flush, factory side rails to create a super-strong and ultra-quiet roof rack. Silver aluminum bars perfectly complement your roofline.
Lightweight aluminum crossbars mount to your vehicle's OEM fixed mounting points and keep a low profile with a unique elliptical design. Extended-length bars offer extra carrying capacity and have T-slots to hold Rola carriers and accessories.
The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.
Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
Canoes must be 14 feet or less on this application
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof
INXB138 is designated to be the frontmost bar while INXB130 is the rear
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
INXB145 is designated to be the frontmost bar while INXB138 is the rear
INXB115 is designated to be the frontmost bar while INXB108 is the rear
Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.
This locking, removable roof rack mounts to your vehicle's OEM fixed mounting points. Its unique elliptical design gives it a low, aerodynamic profile. Lightweight aluminum crossbars have T-slots for mounting Rola carriers and accessories.
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle with factory fixed mounting points. Sturdy aluminum crossbars have top channels with noise-reducing Vortex strips. Integrated locks deter theft.
Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. Black aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.
Combining the strength of steel with an aerodynamic shape, these innovative crossbars attach to Yakima towers to create a heavy-duty, quiet roof rack. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a strong, stylish roof rack. SmartFill rubber strips in T-slots push down to accommodate carriers and accessories - no need to trim. Full-length bars maximize cargo capacity.
Custom Fit Accessories For Your2011 Mazda CX-7
2011 Mazda CX-7 Trailer Hitch
2011 Mazda CX-7 Trailer Wiring
2011 Mazda CX-7 Brake Controller
2011 Mazda CX-7 Roof Rack
2011 Mazda CX-7 Trunk Bike Rack
2011 Mazda CX-7 Transmission Cooler
2011 Mazda CX-7 Performance Chip Tuners
2011 Mazda CX-7 Interior Lights
2011 Mazda CX-7 Exterior Lights
2011 Mazda CX-7 Tire Chains
2011 Mazda CX-7 Vehicle Engine Heaters
2011 Mazda CX-7 Floor Mats
2011 Mazda CX-7 Vehicle Covers
2011 Mazda CX-7 Side Window Vents
2011 Mazda CX-7 Mud Flaps
2011 Mazda CX-7 Lamp Guards
2011 Mazda CX-7 Vehicle Tent
2011 Mazda CX-7 Vehicle Seat Covers
2011 Mazda CX-7 Replacement Mirrors
2011 Mazda CX-7 Windshield Wiper Blades
Popular Mazda CX-7 Accessories
Filter Products (34)
Contact and Help
What our customers are saying:
Fine work guys
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com