Free Shipping on Orders Over $99
What type of roof does your 2010 Subaru Forester have?
No existing rails or crossbars
Factory side raised rails that run front to back
Complete Kit Includes:
Roof Rack Specs:
Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your vehicle with a naked roof. These strong, durable, Euro-style square bars install easily and work with most clamp-on accessories.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.
Roof rack is not intended for off-road use.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
Caution! Check clips after installing. Grab each clip and try to pull them hard away from your vehicle. If the clip moves, tighten the adjustment post. If the clip still moves, recheck your measurements between the towers and adjust if necessary. Check clip again
Maximum allowable weight load is 125 lbs
This fit requires the use of Q-Tower #Y00124. Reference the image link above to confirm your Q-Towers. Contact customer service if you have questions
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
The sunroof should not be opened while the rack is installed. Remove rack when not in use
Rear hatch will interfere with some accessories. Use caution when opening
This load bar system is designed to be mounted directly onto your vehicle's factory installed raised side rails. 50" load bars and locks are included to complete the roof rack.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof
Low-profile, aerodynamic crossbars strap to your vehicle's OEM fixed mounting points or flush, factory side rails to create a super-strong and ultra-quiet roof rack. Silver aluminum bars perfectly complement your roofline.
This system attaches to OEM fixed mounting points on your vehicle's roof
Installation of this rack will require the removal of the factory installed rack/rails (if present)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. The aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
Low-profile, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong and ultra-quiet roof rack. Black aluminum bars perfectly complement your roofline and have built-in T-tracks for mounting accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
INXB108 is designated to be the frontmost bar while INXB100 is the rear
This locking, removable roof rack mounts quickly and easily to your vehicle's raised OEM rails. It keeps a low profile with its unique elliptical design. Lightweight aluminum crossbars have T-slots for mounting Rola carriers and accessories.
Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.
Any load/mount extending beyond the rear hatch seam may cause interference
Clamps onto raised roof rail.
These low-profile, aerodynamic crossbars clamp to your vehicle's raised factory side rails to create the quietest style of roof rack on the market. The locking aluminum bars provide a from-the-factory look and have built-in slots for accessories.
This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.
Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
Due to crossbar spread limitation, Kayak Stacker is not recommended on this application
Canoes must be 14 feet or less on this application
This removable roof-rack system mounts to your OEM raised side rails and keeps a low profile with a unique, elliptical design. Extended crossbars provide extra carrying capacity and include universal T-slots for mounting roof-rack accessories.
Custom Fit Accessories For Your2010 Subaru Forester
2010 Subaru Forester Trailer Hitch
2010 Subaru Forester Trailer Wiring
2010 Subaru Forester Brake Controller
2010 Subaru Forester Base Plate for Tow Bar
2010 Subaru Forester Vehicle Tow Bar Brake System
2010 Subaru Forester Vehicle Tow Bar Wiring
2010 Subaru Forester Roof Rack
2010 Subaru Forester Trunk Bike Rack
2010 Subaru Forester Air Filter
2010 Subaru Forester Transmission Cooler
2010 Subaru Forester Performance Chip Tuners
2010 Subaru Forester Interior Lights
2010 Subaru Forester Exterior Lights
2010 Subaru Forester Tire Chains
2010 Subaru Forester Fluid Filters
2010 Subaru Forester Vehicle Engine Heaters
2010 Subaru Forester Floor Mats
2010 Subaru Forester Vehicle Covers
2010 Subaru Forester Side Window Vents
2010 Subaru Forester Lamp Guards
2010 Subaru Forester Vehicle Tent
2010 Subaru Forester Vehicle Seat Covers
2010 Subaru Forester Windshield Wiper Blades
Popular Subaru Forester Accessories
Filter Products (31)
Contact and Help
What our customers are saying:
Great communication and quick to ship…
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com