2002 Dodge Ram Pickup Roof Racks

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

When open, sunroof may interfere with some accessories

The rubber/chrome door seals and/or trim may deform or be damaged under prolonged contact with any roof rack towers and/or clips. Remove rack when not in use

Press firmly against the lower portion of the clip while tightening the rack. This will properly locate the clip over the internal raingutter

The roof and/or trim is very soft. Do not over tighten or overload the rack

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Press firmly against the lower portion of the clip while tightening the rack. This will properly locate the clip over the internal raingutter

Boa bike mount will not work due to crossbar spread limitations

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Press firmly against the lower portion of the clip while tightening the rack. This will properly locate the clip over the internal raingutter

Boa bike mount will not work due to crossbar spread limitations

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

When open, sunroof may interfere with some accessories

The rubber/chrome door seals and/or trim may deform or be damaged under prolonged contact with any roof rack towers and/or clips. Remove rack when not in use

Press firmly against the lower portion of the clip while tightening the rack. This will properly locate the clip over the internal raingutter

Surf/Sailboard length limited to 8 feet or less on this application

The roof and/or trim is very soft. Do not over tighten or overload the rack

Boa bike mount will not work due to crossbar spread limitations

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

This application is for skis only (four pair maximum)

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

This vehicle comes with preset mounting points designed by the automobile manufacturer. Refer to load carrier instructions for correct load carrier placement

Installation of this Fit Kit requires the permanent mounting of four small fastening clips behind the door's rubber weather stripping

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

This vehicle comes with preset mounting points designed by the automobile manufacturer. Refer to load carrier instructions for correct load carrier placement

Installation of this Fit Kit requires the permanent mounting of four small fastening clips behind the door's rubber weather stripping

This fit application requires specific mounting positions which may be incompatible with the hole patterns on some luggage boxes. Additional holes may be drilled in some boxes

Features:

These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

This vehicle comes with preset mounting points designed by the automobile manufacturer. Refer to load carrier instructions for correct load carrier placement

Installation of this Fit Kit requires the permanent mounting of four small fastening clips behind the door's rubber weather stripping

This fit application requires specific mounting positions which may be incompatible with the hole patterns on some luggage boxes. Additional holes may be drilled in some boxes

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

This vehicle comes with preset mounting points designed by the automobile manufacturer. Refer to load carrier instructions for correct load carrier placement

Installation of this Fit Kit requires the permanent mounting of four small fastening clips behind the door's rubber weather stripping

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

Most of Thule’s roof mount bike carriers (except for the TH513 and TH594XT) will require the use of an adapter to allow the carriers attach to the load bars. For more info see bike carrier product page.

Features:

Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Bar spreads refer to different body styles (2dr, 4dr, wgn., ext. cabs, etc)

This application is for skis only (four pair maximum)

Features:

Silver, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Features:

Black, lightweight aluminum crossbars are paired with locking Rhino-Rack 2500 Series legs to create a roof rack for your naked roof. Elliptical bars are aerodynamic and feature built-in channels to accept slot-mounted and clamp-on accessories.

Installation Notes:

This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.

Features:

Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.

Installation Notes:

When open, sunroof may interfere with some accessories

Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and read of the vehicle, in addition to the rack.

Due to crossbar spread limitation, Kayak Stacker is not recommended on this application

Canoes must be 14 feet or less on this application

Attaches to factory-fitted mounting points located between rubber seals on door frame.

Features:

Equip your vehicle with the quietest crossbar style on the market and carry a ton of cargo with the Whispbar Through Bar extended-length roof rack. The locking, aluminum bars mount with a custom fit kit, and they have built-in slots for accessories.

Installation Notes:

When open, sunroof may interfere with some accessories

Raptor/Raptor Aero will not work due to crossbar spread limitations.

Attaches to factory-fitted mounting points located between rubber seals on door frame.

Features:

The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.

Installation Notes:

When open, sunroof may interfere with some accessories

Any load extending beyond the length of the roof (except luggage boxes) must be secured to both the front and read of the vehicle, in addition to the rack.

Due to crossbar spread limitation, Kayak Stacker is not recommended on this application

Canoes must be 14 feet or less on this application

Attaches to factory-fitted mounting points located between rubber seals on door frame.

Features:

The aerodynamic Whispbar Flush Bar pairs a factory look with the quietest crossbar style on the market to form the ultimate roof rack for your vehicle. These locking, aluminum bars mount with a custom fit kit and have built-in slots for accessories.

Installation Notes:

When open, sunroof may interfere with some accessories

Raptor/Raptor Aero will not work due to crossbar spread limitations.

Attaches to factory-fitted mounting points located between rubber seals on door frame.