Free Shipping on Orders Over $99
What type of roof does your 2000 Kia Sportage have?
Factory installed tracks that run front to back
No existing rails or crossbars
Flush mount rails that run front to back
Factory side raised rails that run front to back
Select Vehicle Style:
Complete Kit Includes:
Roof Rack Specs:
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof-rack system. Bars provide stability to your rack system and carry the accessories that secure your gear. Round design fits all Yakima towers.
HighRoller requires one set of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars
HullRaiser, HullyRollers and Mako Saddles require two sets of MightyMount 39H (Y03539) to be compatible with Yakima CoreBar and JetStream bars
Any load extending over the windshield (except luggage boxes) must be secured to both the front and rear of the vehicle, in addition to the rack. The total weight of the racks and loads must not exceed Yakima's weight limit for that vehicle's factory rack
Canoes must be 14 feet or less on this application
Always be sure to tie down your SUP as per instructions. SupPup and SupDawg require using nose tie down strap
Any load/mount extending beyond the rear hatch seam may cause interference
Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof.
Press firmly against the lower portion of the clip while tightening the rack. This will properly locate the clip over the internal raingutter
Surf/Sailboard length limited to 8 feet or less on this application
The roof and/or trim is very soft. Do not over tighten or overload the rack
Boa bike mount will not work due to crossbar spread limitations
These steel load bars attach to Thule roof-rack feet to create a sturdy, convenient roof-mounted rack. Durable plastic coating resists corrosion and provides cushion for your load. Accomodates accessories that clamp around bars.
Due to the position of the rack, some boxes or accessories may interfere with full opening of the rear hatch or tailgate
Attach these premium, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
If you plan to use TH518, TH598 or TH599XTR bike carriers, an Xadapter is required for mounting. For more info on the adapter, see bike carrier product page.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
This system utilizes a clamp-style attachment to secure itself onto your vehicle's roof
Attach these premium, black, aluminum bars to Thule roof-rack feet to create a sturdy, stylish, roof-mounted rack that is supremely quiet and aerodynamic. Pivoting endcaps let you easily slide on T-slot-mounted accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack for your vehicle. The square bars have built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack or ladder rack. The square bars include built-in C-channels for mounting Rhino-Rack Heavy-Duty, contractor-grade accessories.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Custom Fit Accessories For Your2000 Kia Sportage
2000 Kia Sportage Trailer Hitch
2000 Kia Sportage Trailer Wiring
2000 Kia Sportage Brake Controller
2000 Kia Sportage Base Plate for Tow Bar
2000 Kia Sportage Vehicle Tow Bar Brake System
2000 Kia Sportage Roof Rack
2000 Kia Sportage Spare Tire Bike Racks
2000 Kia Sportage Suspension Enhancement
2000 Kia Sportage Performance Chip Tuners
2000 Kia Sportage Exterior Lights
2000 Kia Sportage Tire Chains
2000 Kia Sportage Catalytic Converters
2000 Kia Sportage Vehicle Engine Heaters
2000 Kia Sportage Floor Mats
2000 Kia Sportage Vehicle Covers
2000 Kia Sportage Side Window Vents
2000 Kia Sportage Mud Flaps
2000 Kia Sportage Lamp Guards
2000 Kia Sportage Vehicle Tent
2000 Kia Sportage Windshield Wiper Blades
Popular Kia Sportage Accessories
Filter Products (20)
Contact and Help
What our customers are saying:
Another great purchase. Low prices, fast shipping and great customer service are always provided.
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com