Light up the ditch or brighten the trail. The combo beams on these 3" LED pod lights offer versatility while off-roading. Included mounts and connectors let you install them to sit above your vehicle's hood. Cool white color.
Light up the ditch or brighten the trail. The combo beams on these 3" LED pod lights offer versatility while off-roading and the yellow lenses improve visibility in rain and fog. Includes mounts and wiring to mount above your vehicle's hood.
Light up the ditch or brighten the trail. The combo beams on these 3" LED pod lights offer versatility while off-roading. Included mounts and connectors let you install them to sit above your vehicle's hood. Cool white color.
Light up the ditch or brighten the trail. The combo beams on these 3" LED pod lights offer versatility while off-roading and the yellow lenses improve visibility in rain and fog. Includes mounts and wiring to mount above your vehicle's hood.
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Jerry, the install of the Aries Bull Bar part #AAB35-4015 do require you to permanently remove the tow hooks to install. It looks like the similar Westin Ultimate Bull Bar part #32-3645 does allow you to keep them though.
Hey Dave, The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would not be intertwined or interfere with the Blue Ox Patriot #BLU37TR. This wire harness is simply plugging into the motorhome and Gladiator tail lights to copy the light…
Because the 8-14.5 tire that you've got sits on a…
Hey Peter you are right that the Opti-Brite LED Strip Light #OPT32ER does require its own separate switch. For that you could use really any on/off switch, my suggestion is the Single Rocker Switch #37212585 and the faceplate #37212845. If you are…
You are correct the hook ups are for the lights on the Blazer LED Cube Light Kit #BL28VR. The different ratings are for each of the circuits. The lights that come with the kit will fit onto the smaller connections allowing you to connect more…
I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…
The easiest to use and highest quality base plate kit that fits your 2023 Jeep Gladiator is the Blue Ox part #BLU53FR which would work great with a tow bar like the #BX7420. We do have custom fit lighting solutions like the Curt part #C96JR that…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Yes, the Blazer LED Cube Light Kit #BL28VR can be used on your 30 amp RV as long as you have a 12 volt wiring system which this light uses. As far as how many of these lights you can hook up each remote is capable of controlling up to 4 of these…
Yes, the etrailer brake assembly part #AKEBRK-7R-SA would work to replace a Dexter 023-327-00 which is a passenger side self adjusting brake assembly. The matching left hand side would be the part #AKEBRK-7L-SA.
Filter Results
