Light up the ditch or brighten the trail. The combo beams on these 3" LED pod lights offer versatility while off-roading. Included mounts and connectors let you install them to sit above your vehicle's hood. Cool white color.
Light up the ditch or brighten the trail. The combo beams on these 3" LED pod lights offer versatility while off-roading and the yellow lenses improve visibility in rain and fog. Includes mounts and wiring to mount above your vehicle's hood.
Light up the ditch or brighten the trail. The combo beams on these 3" LED pod lights offer versatility while off-roading. Included mounts and connectors let you install them to sit above your vehicle's hood. Cool white color.
Light up the ditch or brighten the trail. The combo beams on these 3" LED pod lights offer versatility while off-roading and the yellow lenses improve visibility in rain and fog. Includes mounts and wiring to mount above your vehicle's hood.
Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Peter you are right that the Opti-Brite LED Strip Light #OPT32ER does require its own separate switch. For that you could use really any on/off switch, my suggestion is the Single Rocker Switch #37212585 and the faceplate #37212845. If you are…
Hey Dave, The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would not be intertwined or interfere with the Blue Ox Patriot #BLU37TR. This wire harness is simply plugging into the motorhome and Gladiator tail lights to copy the light…
You are correct the hook ups are for the lights on the Blazer LED Cube Light Kit #BL28VR. The different ratings are for each of the circuits. The lights that come with the kit will fit onto the smaller connections allowing you to connect more…
Yes, the Blazer LED Cube Light Kit #BL28VR can be used on your 30 amp RV as long as you have a 12 volt wiring system which this light uses. As far as how many of these lights you can hook up each remote is capable of controlling up to 4 of these…
Only a small part of the underneath bumper panel on your 2024 Kia Niro is needed to install either the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver #C77NR I added a portion of the instructions which shows…
The Curt Custom Tail Light Wiring Kit #C96JR is what you will need to connect your tail lights on your 2023 Jeep Wrangler to operate of the tail lights on your motorhome. This will have a 4-way flat connector which plugs into the motorhome or you…
For a replacement circuit board you can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. We have confirmed with MaxxAir that this is the correct for what you have.
I hope I got the right measurement for you Roberto. I included a image with the measurement points that I took on the CargoBuckle Ladder Rack Straps #CB32MR below. If you are needing a different measurement please let me know.
Filter Results
