Part Numbers: SB324-081,C31054
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
Specs:
Note: Due to the size of this item it ships via truck freight.
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
If you have a trailer hitch receiver at the front of your vehicle, you can use the Thule GoalPost to carry extra-long lumber or equipment that would not otherwise fit on your roof. When mounted in the front, the load bar on the GoalPost extends farther out from your roof rack crossbars than when the support is mounted in the rear. As a result, you can safely balance long loads with ease.
Average Customer Rating: 4.5 out of 5 stars (21 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.I Installed this unit on a 2011 Toyota SR5. The two areas that took the most time were getting the M12 bolts threaded into weldnuts that had been exposed to the elements for 8 years. I live in the northeast where salt is used a lot in the winter. The other time consuming area was trimming the plastic panels after the hitch is installed. I had to trim in a slightly different area than shown on the diagram. The trimming took a lot of trial and error. Hopefully, a picture of a trimmed panel is shown here. I am a 67 year old amateur mechanic installing this on ramps in my garage. It took about 3 hours including a trip to the auto parts store to get a set of shallow 6 point metric sockets. The deep dish 6 point sockets that I owned would not work for removing the frame bolts. The frame bolts came out much easier than I thought they would using a breaker bar. My impact wrench wouldn’t fit up there. Not enough clearance. Overall, I am very satisfied with the quality of the hitch! I plan on using this hitch along with a load extender to transport long heavy items such as rough sawn lumber, etc. I might also need it if I get stuck getting into or out of hunting camp.
I am just disapointed with the hitch mounting holes not lining up! I know what I am doing and did not tighten up bolts whatsoever so there was room for play and still did not work. I tried so hard to make it work that now one side of the mounting broke on my 4 runner. I really like etrailer products but this one came in wrong but I had to make it work for my needs. I could not wait another week or 2:( Also, my 2020 4RUNNER is stock height with 17 inch BFG tires...Should I have this clearance? Is it standard and looks correct? If I would have had time I certainly would have asked for another hitch that was made correctly. Again, I like etrailer and usually have great luck but this time it cost me money and time and heartache and just overall terrible experience. I would so much appreciate if you made this experience right for me.
Sierra K.
9/10/2021
It sounds like your hitch is slightly flexed. There are a variety of ways to fix this issue with this attached helpful guide. If your weldnut is broken, you will need to remove the weldnut and fish a carriage bolt and spacer through the frame at that attachment point. This attached video shows you how to do that:
Helpful Links
This hitch is well built and well finished - however it's not a great fit for the 2016 Toyota 4Runner Limited. The mount lines up perfect but the hitch bar and receiver are not quite low enough to accommodate the Limited's lower front end, without cutting/removal of body parts beyond the 2 mentioned in the instructions. You will need to remove and modify the lower air dams and an air intake/guard before completely tightening the mounting bolts.
I was able to cut away large parts of the hitch because of my specific application (only needed the mounts to weld off), but other folks with a 2016 Limited may not be happy with removing or trimming the additional body parts or panels.
I can give 5 stars for the quality of the hitch and receiver but 3 stars for fit and ease of install on 2016 Limited.
Great front trailer hitch receiver and it went on smoothly in about one hour. Taking some parts removed from 4runner to put the hitch on took about the same amount of time.
The hitch bracket fits like a glove on a 2022 4Runner. I would like the hitch cannel about an 1-1/2 inch higher. But that’s for Curt. It’s well made and heavy duty.
The chains are great. And fairly easy to put on (the second time).
This is a solid hitch, the finish is good. I have used it with the Thule GoalPost load extender and it is super easy to carry long loads such as lumber or a canoe. Way easier than going to get my trailer hooking up getting my load and returning my trailer. With the front hitch I put in the extender and am on my way. It does hang below the bumper so I gave up a couple inches of ground clearance, which can occasionally make the hitch great for taking soil samples :) I will probably get a small plow this winter which will be awesome when the snow comes.
Better than a snowblower!! Made very well, had it put together and mounted in a couple hours. Used it for two small snowfalls and it worked as expected. Great customer service from etrailer!
I live on a curved, uphill driveway. I keep a boat at my house for a friend but I dreaded backing up the driveway. My dog was barking and I was cussing. A friend suggested I get a front trailer hitch which I did not know existed. This easily-mountable hitch has been an epiphany and I no longer dread parking the boat. The part was perfectly-machined and I will never be without this previously-unknown accessory. 5 stars for sure!
missing one of the two small washers.
can you send a replacement?
I bought a Snow bear personal plow and a separate Curt receiver hitch for the front of my 2012 F250.. after speaking with Erica W. several times due to blunders on my part, all was perfect. Quick delivery, price was right, items are super rugged. The stock photos don't do justice. My plow came in at 350 pounds without the receiver hitch. It's not a cheap toy plow. Get one, they'll fit nearly anything! Thanks Erica!!
Great product! Was easy to install, quality build and nice finish.
I installed the front mount hitch receiver on my 2020 4Runner. The instructions were clearly written, the on-line video was very helpful, and the assistance of my brother to help me was invaluable. Really, get someone to help, as it is very sturdy and heavy.
It has been awhile since we ordered this, but we hadn't had an opportunity to use it. We ran into two minor problems installing it. The 5/8" bolts and carriage nuts that fasten to the vehicle tow loops are supposed to be torqued to 210 ft-lbs. This is next to impossible if you are laying on the ground trying to install it without a lift. I solved this by having my Toyota dealer torque these bolts when I had it in for service. If you try to install the underbody panels (an optional step), it is very difficult to get some of the screws into the proper holes after the hitch is installed I left out those that were too difficult to reinstall. No problem so far. We recently used the hitch with a bike rack to transport our bikes while also towing a trailer. It worked great. I would gladly buy it again. I expect to use it for a second spare tire carrier next summer.
Mike S.
10/19/2015
It has been great. It works well for transporting bikes, as I expected. Iwould recommend purchase of the Curt skid plate for it. We have it and ithas been used a couple of times on rough road excursions.
This is the 2nd Curt front hitch I've purchased for 2 different Toyota 4runners. Both have been designed well and been easy to install. The paint finish is long lasting. Having a front hitch is great for moving trailers, boat slips, etc, and my snowplow connects to the front reciever. etrailer, in my experience, has low prices, fast shipping, and good products. I hadn't heard of Curt, before about 4 years ago, but I definitely am a fan.
Thomas S.
10/7/2020
Im still a fan
This is a really slick hitch. Bolt on no problem and swings my boat in and out of a tight parking space smooth and easy.
Fit well and was easy to install. Excellent dealings with etrailer.
Outstanding! While others were sold out, etrailer.com was fully stocked!
Not to hard to install
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dan
10/22/2020
After one year, so far so good. I have used this unit many times during the year. I have used it for ripping out brush using a slip chain, helped pull a buddy’s SUV and trailer up a muddy hill, used it to help fell a tree, and carry a canoe from NY to Virginia. In the first 3 instances, it was especially convenient to be able to see what was going on and coordinate activities without having to turn around and look back which would be the case if using the rear trailer hitch. Very pleased that I purchased this unit!