Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8826ELT,C31068
Retail:$3,090.90
Our Price: $2,537.36
You Save: $553.54
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meDetail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall
part number: K2AVAL8826ELT
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric actuator raises and lowers plow smoothly and consistently
- Wireless remote control lets you operate plow from the warmth of your cab
- Internal clutch prevents damage caused by overextension of actuator
- Simple, chain-lifting design has fewer moving parts than other plow-lifting devices for a longer-lasting system
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 88" wide x 26" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Weight: 296 lbs
- 1-Year limited warranty
The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.
To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.
This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8826ELT Detail K2 Elite Hitch Mount Snow Plow - 88" Wide x 26" Tall Blade
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31068
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in the USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31068 Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Replaces 31057
Replaces 31368
Customer Reviews
Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall - K2AVAL8826ELT
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31068
Average Customer Rating: 4.8 out of 5 stars (179 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: John03/21/2024
This hitch is high quality and fit perfectly. Install was relatively easy. I needed this hitch because I tow a travel trailer and need to carry my bike rack and bikes as well. I can move the bike rack to my rear factory hitch when I'm not towing, very simple.
The pictures show my truck / RV with my bike rack installed in the front hitch.
by: Rodney12/14/2023
2005 FordF-150
Love the plow.
Only downside is the outside bottom corners have bent backwards while plowing. I will have to straighten and reinforce those areas. I plow six different driveways. I was using a 4whlr plow for these before and it would take me several hours to all day, with this plow its less than 4hrs including driving time and I have vehicle heat. I've had many people looking, commenting and asking about this hitch system. I recommend it and give them the etrailer site for information and purchasing advice. This system is very impressive. Thank you.
by: Glenn05/30/2020
2010 Ford F-150 Raptor
This is the third Curt front receiver hitch I have used on vehicles. The hitch was good quality with clear instructions included. It definitely helped during installation that I had a friend and shop to do the install as the ends had to be spread a hair to slide around the frame rails. We had the hitch installed in about 20 minutes. The reason for the average rating is that this is supposed to fit the 2010 Ford F150 Raptor. Although it does fit, you cannot reinstall the skid plate without sever modifications and then, the skid plate would just be for looks. The end of the hitch also sits behind the bumper requiring me to purchase a hitch extension in order for me to install my receiver mounted winch. I bought the RM-071-1075 from etrailer in order to mount the winch. Recently I had to use the winch and had no issues with this set up doing a straight pull. When we tried to pull at a slight angle, I was afraid of exceeding the capacity of the hitch due to the extra leverage caused by the extension (big heavy Raptor on 37's buried in mud and snow). Overall I would have given the receiver hitch 5 stars if the description mentioned that there would be issues installing on a Raptor. I probably would have done a traditional bumper mounted winch but I like being able to move the winch front to back (which is how I ended getting out of the situation).
by: Daryl S03/20/2014
2011 FordF-150
This is my second Curt Front mount Hitch Receiver I have purchased. I use it to launch my boat and wave runner.
The mounting instructions need to be corrected.
I placed this receiver on the front of a 2011 Ford F150 4wd.
I found it easiest to place the Bolt on Forward passenger side first.
The instructions said to place bolts and bushings from inside.
There is not enough clearance between the radiator and the frame to place the bolt from inside out. I found it easiest to mount with the nuts closest to the radiator.
I did not trim the bumper fascia and it still fits perfect. (plastic has some give)
The 5/8 fish wires are great! All hardware is packaged and taped to Hitch.
Daryl S.
3/20/2015
It has been well worth the purchase. Still works great! No regrets.
by: Caleb Carroll03/26/2019
2011 FordF-150
The hitch was out of square upon delivery, which was discovered when trying to install it. After calling customer service, prompt advice was given which allowed us to return the hitch to square and install safely without marring or voiding warranty. Assistance was detailed and concise and we will very likely utilize etrailer for future vehicle needs.
This hitch was purchased for the purpose of attaching a snow plow to our pickup and fit well after slight modification.
Caleb C.
3/27/2020
We have used this attachment with a snow plow about 6 times now and it has worked very well for us.
by: Tom T.10/05/2014
2014FordF-150
This is my 3rd front hitch from etrailer, and it was a perfect fit. Installed on my 2014 F150 to allow for the installation of a hitch mounted rod holder. Will definitely make future purchase from these guys.
Herb H.
2/28/2016
Tom, I have a new F150 2015 that I also purchased at Larson Ford, want to do the exact set up you have, but I plan on taking truck on beach do you take it on beach and if so any problems with clearance. I would appreciate any other comments you may have about this set up. Where did you get rod holder.
Tom
2/29/2016
Herb, theres plenty of clearance for beach driving and the rod holder was purchased at Murphys Hook house on rt. 37
by: Craig 11/26/2022
2012 Ford Expedition
Well made hitch receiver, clear installation instructions, simple to do
Customer service great
Super convenient front hitch for snow ploughing or winch on my Expedition
Craig
11/27/2023
One year later and the front hitch is still great. Highly recommended
by: Steven Y.08/09/2023
2014FordF-150
easy to install with right tools and a ramp or lift
instructions did not state to torque nuts you need a deep socket 15/16"
main reason is to use snow plow on driveway
by: John01/01/2024
I’ve owned a Manuelly operated snow plow for 15 years. the plow frame slides into the receiver of a 2’’ trailer hitch that can be used on either the front or back of the truck. After many years of sore necks plowing in reverse and many funny looks when people saw me in action !!! Thanks to your product I now plow forward like a normal plow !!! Lastly the local place I bought the plow from wanted literally double the price you gave me.!!!
by: Jeff06/27/2022
2010 FordF-150
Very easy to install. Took me roughly 30 minutes, and as long as you trim the front valance 1st thing, goes quick and easy. We are heading out to the outer banks of nc to do some surf fishing and I wanted to be able to mount my fishing rack on the front of my truck instead of the back so I could open the tail gate and this hitch setup is perfect. Awesome product and anyone who has any mechanical knowledge, this is a piece of cake.
by: Bill H.04/02/2019
Backing a short trailer like my teardrop by yourself can be a challenge. By the time you see the trailer respond to steering it's too late to make easy corrections. I installed the front hitch to allow me to see everything while pushing the trailer into the tightest spaces. The installation was made easier with my motorcycle lift. Written instructions were good but viewing the video from the website first is definitely a good idea. Fit and finish are excellent as are etrailer's knowledgeable staff. Very happy with my purchase and will look to etrailer for my next purchase.
by: Rodney06/13/2019
2010 FordF-150
2009 Ford F150 4x4 front hitch is/seems to be of solid construction... weld/vent holes on tubes could/should be smaller so that excessive water/contaminates couldn't/can't get inside to help prolong life of material.
I installed by self, had no one to help me...hardest part of installation was measuring the center point of air dam... had to use flexible tape measure to wrap around arch of air dam... also used a floor jack to lift and hold hitch in place, until pushing of bolts through front mount holes... personally, but did work alright, the fish wires were bit short for rear mounting bolts to fish from front of frame opening, and working through the factory tow loop mounting bolts...
The measurements for opening to cut in air dam, personally, are a bit excessive, the opening is a little bit larger than needed, but looks alright... instruction sheet says professional install time 30 min, and 60 min for novice/me, took me 45 min., so installation is very easy, also the instructions state tools needed, they should say a ''deep well'' 15/16 socket, standard socket will not tighten the 5/8'' nut on rear mounting bolts.
Ground clearance is excellent, 10 1/2 inches from center of tube to the ground, stock ride 2009 F-150 no lift/leveling.
Overall product looks/will work excellent for my application/purpose.
by: Steve B.10/01/2019
I purchased the front receiver hitch for my Ford F150 so I could attach a snow plow. I installed it myself, and it was an easy installation. It took about an hour, but the instructions were great, and had a great step by step guide. I also watched the instructional video to make it even easier.. It fits perfectly, and is tucked up nicely in the front. I would highly recommend this hitch if you need to put a receiver hitch on the front of your vehicle.
by: Erik H.10/01/2017
I got this for maneuvering boat trailers in tight spaces and will probably get a winch mount at some point too. It is easy to install. You will need to make sure you have the appropriate torque wrenches available and it definitely helps to have ramps to drive the front wheels up on. Another tip is to fish the bolt carrier coil from the back through the bolt hole and then out the front of the frame before putting the bolt in the coil and drawing it back to the bolt hole. Don't curve or bend the bolt carrier, in fact try to keep it straighter than how it arrives so with a little jiggling it won't hang up in the frame rail. That makes it really easy. I was able to install it myself in under an hour even after wasting a little time initially trying to fish the wire through from the front. I added a Curt cap to keep out of the front hitch while driving.
by: James07/17/2018
Pontiac Trans Sport Van
We are VERY happy with the front hitch. We pull a camper and rather than put the bikes on the roof this was a great alternative. We took our grandkids camping last summer and we were able to transport all the bikes. The bikes are below the driver's field of vision which was our initial concern, no problem. The hitch was a great price and we had a local garage do the install in one afternoon for $90.00. While it may look a little different than most traditional rear hitches, it is perfect for our needs!
by: Stephen11/15/2023
2011 FordF-150
This was a very tight fit on my 2011 F-150 Ecoboost. It basically sits flush with the bottom of the intercooler and if you don't raise it up perfectly level when installing it, its difficult to get the bolts in. Initially I thought it was not going to fit. That said, the hitch works great, i use it for a receiver mounted, light duty plow setup and love it. The install took about 40 minutes and I did it myself, with the help of a floor jack holding up one side. If i Had to do it again i would make sure i had a friend over to help.
by: Rik C07/08/2019
2017 Ford Expedition
I purchased this hitch for a 2017 Ford Expedition. This is the second hitch I have purchased from etrailer, the first being on my previous truck, a 2006 F-150. Ordering was easy, shipping was quick and customer service was super helpful.
Not counting the time it took to get things together, it took me a hour to install the hitch by myself. Lifting the hitch in place by myself was a little awkward, mut I managed and it was easier once I got the first bolt in place.
The directions were good, except they were written for a F-150. There are slight differences between the 150 and the Expedition. I was able to figure these out easily enough, but it would have been nice if the instructions mentioned them.
The biggest difference between the instructions and my vechicle is I did not need to trim the fascia. Fortunately I lifted the hitch up and did a dry fit and discovered this before I trimmed anything.
The other thing that was not mentioned in the instructions is there were dividers on each side of transmission cooler that attached to the lower air dam. I secured these to the hitch with zip ties when I was finished with the install.
My bike rack fits nicely on the hitch. At first I was worried the hitch would sit too far back but there is just enough clearance when it is installed.
All in all, it looks nice, was easy to install and now I can take bikes with me camping.
by: Garrett01/09/2018
2017 GMC Terrain
The CURT hitch was extremely easy to install. It probably took me 45 minutes. No drilling, instructions were easy to follow and you can hardly see it once it is installed. Thanks again for your support and follow up. I would order again from etrailer.com. Here are a few photos of what I use the front end hitch for.
by: Kevin04/25/2024
product as advertised, fixed my issue. Always great service from etrailer
by: Dave 11/30/2023
2011 Ford Expedition
Because of health issues, I had a local truck store install this for me. 4 bolts and it was on. It was installed on a 2011 Ford Expedition. The first thing I had to do was install a 6 inch riser connector to raise it up. Then I installed a motorcycle carrier that weighed around 40 pounds. Lastly, I mount a 2004 Honda 250 Rebel onto that carrier which weighs around 330 pounds. All in all, I'm pushing the maximum weight limit of 500 pounds but it handles it wonderfully. Very satisfied with my purchase!
by: Rich L04/17/2016
2011 FordF-150
Excellent product fast delivery! The front mount trailer hitch fit perfectly on my 2011 f150, was easy to install, within an hour, the instructions were accurate. I used my motorcycle jack to raise the hitch to position. See pics. I use the front hitch to position my boat in tight spots.
Thanks for a great product
Rich
by: Troy11/21/2018
2013 Ford Expedition
Very solid product and easy to install. Took me about an hour to install. I installed by myself. I put 2x4's underneath to support the hitch and it actually lined up perfectly with the holes on the truck. I am using the hitch for a snow plow.
by: James10/23/2023
This plow does not stand up to much use. I used it for my long gravel driveway and I was dissapointed in the durability of the plow. The plow bent near the cutting edge and twisted when I accidentally bumped into a rock when turning around. This plow is for light use only and it does not back drag snow well since it is light and does not have any down pressure.
by: Allen09/01/2023
I can only comment on the condition of the box and shipping carton. It was in poor condition. Opened at every seam, pactched and taped plus restapled. I just hope product is unharmed.
by: Baja road trip09/03/2020
This time last year I prepared my truck for a 3k plus trip to Baja. My motorcycle needed to mount on a front hitch being that my Airstream was towed on the back,. Not a single problem a year later. The round trip drive as well as the local rough roads caused a lot of wear and tear on everything Not the hitch. Now I use the front hitch for my Thule Fat tire rack. I am really happy to have an added hitch on the front of my truck
25
179
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Will the Detail K2 Snowplow # K2AVAL8826ELT Fit on My 2000 Ram 2500?
- From your recent searches, I believe you are asking about the Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall # K2AVAL8826ELT. This snowplow is confirmed to fit your 2000 Ram 2500 4x4 as long as you do not have the Sport submodel. We unfortunately do not carry any snowplows that work with a Sport.
If you need a compatible front hitch receiver for your truck, I recommend the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31604. Not only does this hitch come
view full answer... - Recommended Snow Plow for a GMC Sierra 2500 w/ a Front Mounted Hitch
- Since you already have a front mount hitch on your 2022 GMC Sierra 2500 then the Detail K2 Elite Snowplow item # K2AVAL8826ELT will work great for your truck.
The Detail K2 Elite item # K2AVAL8826ELT weighs 296 lbs and requires a 2" x 2" receiver. Most front mounted hitches have a minimum capacity of 500 lbs so you are good to go.
It has a wireless remote so you can control the blade height from inside the cab and there are skid shoes so you can plow over uneven surfaces like gravel
view full answer... - Snow Plow Recommendation for 2010 Toyota Tundra with 2 inch Hitch
- For your 2010 Toyota Tundra with a 2 inch front hitch we have great plow options like the Detail K2 part # K2AVAL8826ELT which can be raised and lowered from inside your cab with a remote setup but we do not have any options that allow you to remotely angle the plow blade from left to right. This plow is still adjustable in this way but you have to perform that adjustment manually.
view full answer... - What Front Hitch and Snow Plow Fits My 1997 Dodge Ram 2500?
- Yes! The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31604 is confirmed to fit your 1997 Dodge Ram 2500 4x4 with the Cummins engine. The hitch comes with all mounting hardware included.
Also, you will be able to attach the Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall # K2AVAL8826ELT to that setup. If you need a hitch pin for the plow to attach to the hitch, I recommend the # C21504.
view full answer... - Snowplow Recommendation for a 2009 Ford Explorer Sport Trac
- Our plows have some adjustability, but they don't have a power angle - to adjust the angle you will need to do so manually.
For your application I recommend checking out the Detail K2 Elite # K2AVAL8826ELT which installs on your 2009 Ford Explorer Sport Trac using the Curt Front Mount Hitch Receiver # 31545.
I like this snowplow because it's 88" wide x 26" tall, it has 3 different angle positions (left, center, and right), and it uses a chain-lifting design that does a great job at
view full answer... - Can I Use the Detail K2 Elite Snowplow on a 6-Inch Lift on a 1995 Chevy K3500?
- I went ahead and reached out to the engineers at DK2, and they confirmed that with a 6-inch lift on your 1995 Chevy K3500, you will be able to use the Detail K2 Elite Snowplow for 2" Hitches # K2AVAL8826ELT only if you attach the Replacement Cross Member Plow Attachment for Detail K2 Snowplows # K2CRM3312.
view full answer... - Recommended Snowplow for 2 Front Trailer Hitch on One Ton Pickup
- If you already have a front mount hitch then all you'll need is a snowplow which uses the hitch receiver for installation. The Detail K2 Elite Snowplow for 2" Hitches part # K2AVAL8826ELT for example is a great option with an 88" wide blade so it will be great for larger pickup like a 3/4 or 1 ton. It has a wireless remote so you can control the blade height from inside the cab on the fly and there are skid shoes so you can plow over uneven surfaces like gravel without damaging the blade.
I
view full answer... - Would EcoHitch Front Hitch for 2013 Ram 1500 Work with Detail K2 Elite Plow
- The Detail K2 Elite Snow Plow part # K2AVAL8826ELT that you referenced was designed to work with front hitches that install lower on the vehicle than your ecohitch. This would hold the plow much too high and would not work. You'd need a hitch like the Curt # C31015 which installs lower on your 2013 Ram 2500.
view full answer... - Will Curt Front Mount Trailer Hitch Fit 2011 Ford F-150 SVT Raptor
- I checked with the manufacturer and am happy to confirm for you that the Curt Front Mount Trailer Hitch Receiver # C31068 will absolutely fit your 2011 Ford F-150 SVT Raptor. This is a no-drill installation that will give you the 2" receiver you are looking for on the front of your truck.
I have added a link to the instruction manual for you to check out as well.
view full answer... - Does Air Dam Get Reinstalled After Installing Curt Front Hitch on a 2011 Ford F-150 EcoBoost
- The air dam on your 2011 Ford F-150 will not be reinstalled after installing Curt front mount receiver # C31068. It will not harm anything at all to take off the air dam. The hitch will sort of act like an air dam itself since it will occupy some of the space of the air dam.
view full answer... - Comparing Installation of Curt C31068 vs Draw-Tite 65061 on 2010 Ford F-150
- I spoke with my contacts at Curt and Draw-Tite and was given the following information.
Installing the Curt Front Mount Trailer Hitch Receiver, # C31068, on the 2010 Ford F-150 Supercrew 4x4 with a straight down air dam will require some minor trimming to the fascia. As for the skid shield he said more than likely this hitch will not require that you modify the skid shield. As for the oil filter, he said the hitch should not interfere with your access to the filter.
According to
view full answer... - How to Finding Center Point of Front Bumper Fascia on 2013 Ford F-150 STX for Hitch Installation
- The installation instructions for the Curt Front Mount Trailer Hitch Receiver # C31068 are linked for you at right and these include in step one a diagram of the lower plastic bumper fascia trimming required. The exact dimensions for trimming vary slightly between the 4X4 and 4X2 versions of the truck. You will make either a 3-1/2- x 1-3/8-inch cut (4X4) or a 3-1/2- x 1-inch cut (4X2). Use a measuring tape to find the center point on the fascia.
view full answer... - Is Air Dam Trimming Required for Front Mount Hitch Installation on a 2010 Ford F-150
- Yes, you will need to trim a 2-1/2 inch wide by 1-1/4 inch high spot on the bottom of the plastic air dam, and if your vehicle has a rear air dam installed, behind the forward lower air dam, you will need to remove it also. This hitch will only fit the 4 Wheel drive 2010 F-150.
We have not had the opportunity to install this hitch on a 2010 Ford F-150 yet or do a video installation. We do have a link on our site to detailed instructions for you to review.
We also have the Draw-Tite
view full answer... - How to Easily Move Around a 7,000 Lb Travel Trailer
- I do have an option for you but the two front mount trailer hitches we have for your 2010 Ford F-150, the Draw-Tite Front Mount Trailer Hitch Receiver part # 65061 and the Curt Front Mount Trailer Hitch Receiver part # C31068 both max out at 5,000 lbs gross trailer weight. Therefore, in order for you to easily move your 7,000 lb trailer around I recommend using the Trailer Valet XL Trailer Dolly part # TVXL2 for 2" hitch ball or part # TVXL25 for 2-5/16' hitch ball.
The Trailer Valet
view full answer... - Front Mount Hitch and Winch Recommendation for 2014 Ford F-150 4x4 with EcoBoost Engine
- You can certainly use a front mount hitch with a winch mounting plate to provide a winch at the front of your 2014 Ford F-150.
For a front mount hitch for your truck, I recommend the Curt Front Mount Trailer Hitch # C31068. No drilling is required to install this hitch, but you may need to trim the front air dam and/or front fascia. This hitch offers 9,000 pound capacity for line pull, and a 500 pound vertical load capacity.
I have attached an installation video of this hitch on
view full answer... - How Much Front Fascia Trimming is Required to Install the Curt Front Hitch # C31068
- The Curt Hitch part # C31068 that you referenced will require you to trim a 3-1/2 inch by 1-3/8 inch section of the front fascia for 4x4 models and a 3-1/2 inch by 1 inch section on the 4x2 models.
I also attached a set of installation instructions to the right for you to check out as well.
view full answer... - Recommended Front Mounted Trailer Hitch for 2012 Ford F-150 with 2 Inch Hitch Ball
- The Curt Front Mount Trailer Hitch Receiver # C31068 is my recommendation for your 2012 Ford F-150. I then recommend the Curt Class III Ball Mount with 2" Ball - 2" Drop # C45036 to allow you to launch and load your bass tracker boat. This combination will work very well for your application.
view full answer... - Does Air Dam Get Reinstalled on 2014 Ford F-150 After Installing Curt Front Trailer Hitch
- I spoke with my contact at Curt about front hitch # C31068 for your 2014 Ford F-150 4x4. He said that you could trim the air dam and reinstall it after the hitch is installed but it is difficult to do so. As a result most people end up leaving the air dam off.
view full answer... - Recommended Front-Mount Trailer Hitch For 2010 Ford F-150
- The front mount trailer hitch I recommend for your 2010 F-150 is the Curt Trailer Hitch receiver, part # C31068.
This trailer hitch has a 2 inch receiver opening and requires no drilling when installing. I have attached a link to our product page for ball mounts you can check out.
view full answer... - Recommended Front Mount Hitch for a 2014 Ford F-150
- Yes, we do. It is the Curt Front Mount Trailer Hitch item # C31068. This hitch is custom fit and bolts to your 2014 Ford F-150 with included hardware.
I have linked an installation video below so you can see how to get this hitch set up and what it looks like once installed.
view full answer... - Recommended Front Mount Hitch for a 2011 Ford F-150
- To add a front mounted hitch to your 2011 Ford F-150 you will need the Curt item # C31068. It has a 2" receiver and a 500 lbs vertical load limit so it will work great for a bike rack.
I have linked an installation video below to help you get it set up.
view full answer... - Is There Trimming Involved for Installing the Curt Front Hitch C31068
- To install the Curt Hitch part # C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.
view full answer... - Front Hitch and Snow Plow Recommendation for 2017 Ford Expedition
- For a front hitch confirmed as a fit for your 2017 Ford Expedition you need the part # C31068 which will then allow you to use a plow like the K2 # K2AVAL8219 which would work well.
I really like this plow as it doesn't require any winches or wiring to use and it work very well. It would be perfect for a drive way.
view full answer... - Does the Skid Shield Need To Be Removed When Install Curt Front Hitch On a 2014 Ford F-150 Raptor
- I spoke with Curt about installing the Curt Front Mount Trailer Hitch Receiver part # C31068 on a 2014 Ford F-150 Raptor and they informed me that you can keep the skid shield as the trailer hitch installs on the outside of the frame rails and the skid shield installs on the inside of the frame rails. However, you will need to do some trimming but you should still be able to keep the skid shield.
view full answer... - Front Mount Hitch Recommendation for a 2014 Ford F-150 Ecoboost
- For a front mounted hitch confirmed to fit your 2014 Ford F-150 you would want the Curt hitch part # C31068. We haven't had any reports of intercooler interference with having this hitch installed on a Ecoboost model truck like what you have.
The most popular bike rack we carry is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
Depending on the size and shape
view full answer... - Replacement Hardware For Curt Front Trailer Hitch C31068 On a 2009 Ford F-150
- Yes, we do offer a replacement hardware kit for the Curt Front Mount Trailer Hitch Receiver part # C31068. In order to obtain this you will need to use the Replacement Hardware Kit for Trailer Hitches part # RHK. Once you arrive at the product page you can enter "C31068" into the hitch item number box and then "Curt" into the manufacturer drop down. This will give you the exact same hardware that should have came with your trailer hitch.
view full answer... - Can Front Mounted Trailer Hitch Receiver for 2011 Ford F-150 be Used for Moving Trailers
- You can definitely use a front-mounted trailer hitch receiver to move trailers into tight spots so you don't have to back up. In fact, this is a very common practice because let's be honest, even with the greatest back-up cameras in the world, parking a trailer while backing up isn't so easy.
As for fit on your 2011 Ford F-150, I recommend the Curt Front Mount Trailer Hitch Receiver # C31068.
view full answer... - Fit and Compatibility of Curt Front Hitch C31068 on 2014 Ford F-150 EcoBoost
- The Curt front mount trailer hitch # C31068, is designed to fit 2011 to preset Ford F-150 4x4 trucks with EcoBoost. These are some installation notes mentioning some trimming or complete removal of front air dam and/or fascia may be required for installation.
I have linked an installation video of this front hitch being installed for you to check out.
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Test Fit:
Zack K
Video by:
Andrew K
Written by:
Laura H
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Glenn
6/6/2021
Still working with no issues.