Part Numbers: K2AVAL8219ELT,31313
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.
Features:
Specs:
The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.
To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.
This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.9 out of 5 stars (56 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Work great, was easy to install, instruction that it came with weren't great, but video online helped. Going to use it for a bike rack and Winch. There was some scratches on the hitch when I received it, I think you need to rethink you packaging, putting metal on metal and wrapping it Saran wrap just doesn't keep it from rubbing, I will have to touch it up. Thanks for the fast shipping.
My front hitch for my 2008 Tacoma got to me within 3 days very fast service. I installed it in 30 minutes and was able to put the front skid plate back on without doing any other changes to it. Very good product. I will be using it to put my rod rack on front of truck to use it at the outer banks of North Carolina for surf fishing this coming fall. Thanks for a very good hitch.
Mike H.
7/21/2016
The hitch has worked really well for me. My rod rack that I use hitch for was esay to install and remove. Very good product.
I need to thank the team @ eTrailer. The original front hitch for my Tacoma that I ordered was out of stock for a few months (Covid), and I needed the hitch for a trip in a week and a half. The eTrailer team had a different manufacturers brand at my door step in 2 days. I assembled the parts in my living room to make sure I had all the hardware, and exactly where all the bolts/washers will go. I cant wait to install it tomorrow. eTrailer had the best price I could find and delivered me the part in a very tight timeframe. eTrailer for the win!!!
Gregory
11/1/2021
Perfect. I attach a cooler and rod rack to the front of my vehicle for fishing. The rack is constantly loaded to and from the trailer hitch. After a year of abuse, its still not rusting I was pleasantly surprised. The trailer hitch on the back of the vehicle that came on the vehicle from the factory had rust by now on it. I would recommend.
Installed the Curt front hitch on a 2006 Tacoma. Install time was approximately 45 minutes by myself - very straight forward installation; instructions were very clear. I did not have to remove the skid plate. I was concerned that the hitch would be low, but it sits higher than the lowest point of the skid plate.
Primary use will be to mount a bike rack when pulling a travel trailer. Does the job perfectly!
Customer service was above and beyond. I ordered this on Wednesday afternoon and it arrived Friday afternoon! Box arrived in good shape, hitch and all hardware were in perfect condition.
This thing is fantastic! My girlfriend and I put this thing together. It is perfect for keeping up with a storm. It is sturdy, takes a beating and keeps on going. I have a 2014 Ram ecodiesel. Would not use this plow setup for professional jobs however, only because it isn’t heavy enough to plow through mounds of snow covered ice. And when I say mounds, I mean 2 feet high and dense. Only drawback was shipping: I never received a tracking number from the shipping company but it did ship right away and was delivered in the time frame I was given. Enjoy guys!
Just got my front receiver hitch today got it put on took me about 45 minutes to an hour to get it installed. etrailer really got this delivered quick. Thanks etrailer!!
Super fast delivery! Double boxed for security. Completed straight-forward installation by myself in about 40 minutes using routine hand tools (3/4" & 11/16" wrenches).
Fit great!! Easy to install with some simple wrenches and sockets. Took approximately 45 min to mount. It arrived in 3 days and was packaged appropriately!!
Fit, works, reasonably priced.
Works great to make a tricky turn pushing my boat into the garage. Much better visibility and maneuvering than trying to back up.
it's worked fine so far. Have used it to move my trailer and when not doing that I have my winch mounted on it which is the main reason I got it. super strong and looks good.
Rex A.
12/31/2021
very happy still using winch on it
Added this hitch a yr ago - orginal intent was to install a bike hitch rack on front ( works great as long as it is day time! Bikes distort headlights do much so not as good as I was hoping. Second note it did save my front end in September when a deer decide it want to play chicken and jumped out in front of me- ended up cracking my bumper but pretty sure (don't ask) that the hitch prevented it from destroying my entire front grill- so certainly paid for it self then. Lastily it is really convenient for moving my trailer around when parking it- its short and kept in a really tight spot so being able to just push it in instead of backing it in makes it so much easier.
The front hitch makes it easy to push my off-highway teardrop trailer through a gate at an angle and into a storage shed. The hitch came with complete instructions for my 2006 Toyota Tacoma. I was able to install with no assistance. I used a floor jack to position the hitch, and the process took me 45 minutes .
Works exactly as stated and provides a nice 2” receiver style hitch on the front end of the truck! I would have preferred a more discreet under mount but knew prior to install that it would be as pictured. I use mine with a hitch-mounted winch so that I can pull from both front and rear, depending on situation! No complaints and I would buy again!
I am not an automotive person. I was very leery about attempting this project. I called etrailer to confirm that I had selected the correct hitch receiver. Customer service was very helpful and I placed my order over the phone. I was told that there might be a delay in shipping due to back order. I received update emails and the product arrive earlier than promised. Installation instructions are clear, an online video is available. Installed hitch receiver on my 2009 Toyota Tacoma by myself. No exotic tools required. I would not hesitate to purchase from etrailer again. Oh, great price too!
Easy to install. Even able to put by bull bar back on. Strong and sturdy. The striper are going to dread seeing me pull up.
Eric M.
5/9/2015
Still like brand new
Great hitch, solid construction, fits perfectly, great value. This is actually the third Curt front mount hitch that I have bought and installed on my Toyota pickups over the years.
I had self inflicted doubts about this product but Ashley was professional and timely in setting me up with a technician wor was able to direct me for proper installation.
i had looking for a front mount trailer hitch for my 2009 toyota tacoma came across the web page ordered the unit with no problems it showed up a few days later due to the weight of the hitch it was delivered by ups with the box completly busted open but no damage so who cares. i installed it today very nice install very straight forward i am planning to customize the skid plate along with my front light bar to fit on the hitch took about an hour to install. the unit is overbuilt for what i need it for. more than enough to hold my front mounted cooler and rod holders for surf fishing photos to follow> will buy from this company again,and again, thanks again andrew r milton mass
All Hardware was present. Electric Harness installation went well after I had difficulty separating stock plug for harness plug in. Removed Bumper for more room to view. I suggest a helper to position assembly up in place. I was going to use a floor hydraulic jack to get er done. A friend just came by. Had to purchase a 19mm box/open end wrench to tighten 2 bolts. Deep sockets will not get in there.
Now for the front hitch.
Cheers dlj
For my 2012 Double Cab Tacoma.
Arrived to my home as predicted. Easy to install, removed the skid plate but able to re-install it afterwards. Looking forward to using it.
Richard A.
5/15/2015
Did you have to modify the skid plate in anyway for the skid plate reinstall?
Yadayadayada
5/19/2015
No modification needed or required to fit on my 2012 Tacoma DCSB off road package
Great front hitch. Took about 35 minutes to install on 2012 Toyota Tacoma with just a few wrenches. The hardest part was getting the plastic hole plugs out of the holes to use to mount the hitch to the frame.
This was the second CURT product I purchased, and was (is) equally impressed. ALL washers, nuts, bolts, etc were included as promised. Fit was also as promised; no drilling, bending, forcing or other muscle power required. Kind of hard to believe; didn't even skin a knuckle. Thanks. Bill
Looks well made. Received promptly from eTrailer as promised. Haven't been able to mount it yet as the hardware package from Curt was incorrect. Still waiting for a replacement bolt.
Product arrived fast.Everything was there and in excellent shape. With the instructions installation was a breeze!! This will be used for a plow I purchased for next year.
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
5/10/2023
Awe, I am sorry that it arrived in that condition. I would recommend using a rust-oleum type of paint to prevent any corrosion.
Helpful Links
faq-rust-prevention-maintenance.aspx