Dexter Predator DX2 Trailer Brake Controller - 1 to 2 Axles - Proportional
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
Part Numbers: 58-8,20127
Retail:$240.60
Our Price: $178.92
You Save: $61.68
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Dexter Predator DX2 Trailer Brake Controller - 1 to 2 Axles - Proportional
part number: 58-8
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large digital LED display, fingertip gain control, a slide-bar manual override, and built-in safety features.
Features:
- Brake controller activates your trailer brakes in proportion to your vehicle's braking action
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- Large digital LED display shows your controller settings and monitors voltage output
- Simple, intuitive controls keep your settings in easy reach
- Adjustable gain setting determines the amount of braking output sent to the trailer's brakes
- Built-in, slide-bar manual override activates trailer brakes to control sway in emergency situations
- Deceleration sensor lever lets you adjust initial braking power and aggressiveness for smooth, safe braking
- Built-in safeguards protect your vehicle and trailer
- Current limiter protects vehicle from shorts in the trailer wiring
- Hazard flasher immunity prevents pulsing of the brakes when flashers are activated
- Quick and easy mounting with included bracket and hardware
- 90 To -35 degree mounting range - must be horizontally level
- Pigtail harness hardwires into your vehicle
- Made in the USA
Specs:
- Application: trailers with up to 2 axles (4 brake assemblies)
- Compatible with electric brakes only
- Dimensions: 6-1/2" long x 3" wide x 1-5/8" tall
- Mounting angle: -35 degrees to 90 degrees vertically
- 7-Year limited warranty
Proportional Braking
The Dexter Predator DX2 brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Predator DX2 uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
Large Digital LED Display
The Dexter Predator DX2 features a large LED display that's easy to see so you can check on your current braking output setting with a glance. This display is designed to keep it simple and not overload you with information. The display will also show you the voltage to confirm that the trailer brakes are receiving power.
Braking Output
During the initial setup process, use the thumbwheel on the front of the brake controller to adjust the braking output. The output control lets you set the maximum amount of power that will be applied to your trailer's brakes. Typically, the output is only readjusted when you experience changing road conditions or if the weight of your trailer changes. The power output control on this brake controller lets you set the maximum amount of power that will be applied to your trailer's brakes. Typically, the power output is only readjusted if you switch from a heavy, loaded trailer to a much lighter, empty trailer - or vice versa.
During the initial setup process, you can use the thumbwheel to adjust the power output. To get more power to your brakes, increase the power level. To decrease the power output, lower the power level.
Sensitivity Adjustment with Deceleration Sensor Lever
Once you have the overall power set, you can fine-tune the power output by adjusting the sensitivity of the internal sensor. This controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the maximum braking level. You can adjust this when you're towing heavy loads and you need more umph to bring your trailer to a stop. Your tow vehicle doesn't need that much power to brake in time, but your heavy trailer does. Boost gets the braking power to your trailer brakes faster and with more intensity so that it doesn't push your tow vehicle forward. To increase the sensitivity for towing heavier loads, move the lever away from you. For a lighter load, move the lever toward you.
Slide-Bar Manual Override
The Dexter Predator DX2 comes with a built-in manual override slide-bar in easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just push the slide-bar to the left. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
You can also engage the manual override to help you move a sliding 5th-wheel hitch closer to your truck's tailgate for tight maneuvering during slow speed turns. Just apply the manual override to hold the trailer in place while slowly moving the tow vehicle forward.
Quick, Simple Installation
Because the controller operates with an internal inertia sensor, it must be mounted between -35 degrees and 90 degrees vertically. The Predator DX2 also needs to be horizontally level and parallel with the direction of travel to function properly. During initial installation, the deceleration sensor lever must be positioned straight up and down. After mounting the Predator DX2 using the included bracket, hardwire the controller directly into your vehicle.
Installation Accessories
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle
Note: One of the following will be required to ensure proper installation:
- 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications
- 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications
058-008-00 Dexter Predator DX2 Electric Brake Controller with Inertia Sensor - 1 to 2 Axles - Proportional
Replaces 58-8
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
part number: 20127
Tow Ready Replacement Plugin Harness for the Tekonsha P3, Voyager, Prodigy, and Primus Brake Controllers. Also works with Draw-Tite Intella-stop Xtreme, Intella-stop Ultra, Intella-stop Digital, and Activator III (5520) brake controllers.
- Wire lead length: 12"
- Wire functions:
- Blue: trailer brakes
- White: vehicle battery negative terminal
- Black: vehicle battery positive terminal
- Red: cold side of stoplight switch
8506920 Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
Replaces 20127
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Defective
- Too difficult to install
Customer Reviews
Dexter Predator DX2 Trailer Brake Controller - 1 to 2 Axles - Proportional - 58-8
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long - 20127
Average Customer Rating: 4.8 out of 5 stars (737 Customer Reviews)
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large digital LED display, fingertip gain control, a slide-bar manual override, and built-in safety features.by: Michael 02/18/2023
Exactly what I was looking for and needed ! It was delivered very quick . Actually I just ordered a complete wiring harness from you tonight . Your service and follow up is great
by: David11/05/2019
2007 Ford Ranger
Purchased a Teckonsha Voyager brake controller and the ETBC7 install kit.
The instruction an video were very clear and easy to follow. Installed on a 2007 Ford Ranger Sport. Tech support was also very helpful on the one question I did have.
David
11/8/2020
I have been completely satisfied with this item. It has operated as advertised an has had no problems.
by: Wayne12/20/2019
The drawtite hitch and trailer wiring harness fit great. Instructions were clear and concise. Installation was a breeze. I am ready to tow my little trailer now. As soon as I get the brake controller installed, I will be ready for my big trailer.
by: Chris C10/09/2016
If your truck comes with the tow haul package.... this item is literally plug and play. I had it wired up and all mounted inside of thirty minutes. It's literally 4 wires and the stock system wires are labeled along with the brake contoller. I haven't tested it yet but so far I am thoroughly impressed!
by: Easy install01/21/2021
Perfectly wired directly to existing wiring that I had for the previous brake controller I replaced with the, Draw Tite I Command. This will make it a lot easier should I choose to upgrade the unit in the future.
Fantastic customer service from Joshua as well.
by: Griff Morgan06/19/2022
Class iii Draw Tite trailer hitch:
This part was quick and easy to order and I received it sooner than expected. My mechanic said the installation was easily accomplished and looks great on my car. I would not hesitate to order from etrailer again!
Griff M.
6/21/2023
The product has worked well. I have had no problems with it.
by: Rudy04/20/2023
Purchased this as part of all parts required to convert 1996 Jayco over to electric brakes. Very happy with results. Surprised to see after winter in storage that the battery supply still shows full charge.
by: Bryce05/03/2022
Ram 2500
I installed the Curt gooseneck on my 1993 GMC 2 Wheel Dr. 2500 truck. All the components have tight tolerances. It took me eight hours. With a socket and the wrench. Laying on my back. I did have to cut the wheel well lip about 3/8 of an inch off because I could not get that front angle bar to slide in without hitting it, no way around it unless you lift the bed up and I wasn’t going to do that!!. You have to cut it.instructions do not state that. I’m very happy with the Hitch, it is definitely stout! I did have to make a notch on the outside brackets to go over my airbag bolt. I also had to remove the support bracket on the inside of the frame for the airbag and the crossmember for the spare tire to get the front angled bar in.
by: Douglas08/03/2023
As always, etrailer delivers. Part was on time and a perfect match for the brake controller. What you don't get from Amazon is the technical support on how to install or use the equipment purchased from etrailer. That's why I keep coming back!
by: Don 03/07/2021
My truck was stolen and wrecked. I was able to retrieve the Tekonsha Brake controller from under the Dash board before it was hauled to the salvage yard, but not the wire harness. I was ale to order a replacement harness from eTrailer and reinstall the controller in my new truck. I had no problems at all. Thank you eTrailer for the great support.
Don
3/9/2022
Still works perfectly after one year. Actually, I been using this Controller for well over a year. I just reinstalled it in my new truck a year ago.
by: Tim 06/21/2020
These guys are great they had the installation kit it came with everything you need and even had a video for my specific vehicle to install the brake controller and wire in a 7 pin trailer plug
If you don’t have factory brake controller the etbc7 is an amazing kit they have comes with everything I mean everything
Tim
6/26/2021
Everything has been excellent e trail has the right products and they fit just like they say
by: Rancher01/07/2023
Finally a brake controller that does what I set it to, not what it’s little computer brain, designed by someone who has never pulled a trailer thinks it needs to do.
by: Chad07/13/2021
Works as intended, but the plug on the back of the controller is a loose connection. Sometimes I would go to brake and find that I had no trailer brakes because the controller lost power. After a wiggle it would start to work again. I was able to shave the Molex plug a bit and now I don't have any problems with it.
Sierra K.
7/19/2021
Thank you for your review. I have not heard of that problem. I would have used some electrical tape.
by: Bill08/13/2020
The service you receive from etrailer is top notch. This brake controller has worked very well. I actually swap it between two of our vehicles. Just unplug it from one and plug it into the other.
Bill D.
8/15/2021
Very well. The service etrailer provides is the highest Ive ever experienced. They are just super to work with. Ive used them time & time again. I recommend them to everyone looking for anything they carry.
by: Charles 09/25/2022
Chevrolet
Wiring harness I used to connect into the trailer brake control circuit. Requires pulling some inside trim in the drivers footwell area to access my 2022 Chevy Colorado's wires. Follow the intructions or better yet go onto YouTube for video on what goes where.
by: Steve03/10/2024
1976 Chevrolet Blazer
Great selection and servive
by: Shad11/01/2022
Works great. FYI YOU HAVE TO RUN A BRAKE WIRE FROM THE CONTROLLER TO YOUR LIGHT PLUG . For it to work properly.
by: Mile03/19/2024
Quality plug and what i needed for my F-53 chassis.
by: Michael 09/22/2022
I installed this controller in my 1982 Chevy K20 pickup.
It works perfectly! Etrailer exceeded my expectations with their level of customer service from the time the order was placed to the products arrival at my home. Truly 5-star service!
The video tutorials are straight forward and very helpful.
The universal installation kit literally had everything needed to complete the job.
Side note:
I would have liked to see the (2) 10ga wires in the insulation to be black and blue, not black and white, no biggie, black on black and white on blue.
Thanks again!
by: Steven05/03/2022
2008 Honda Pilot
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat, Item # ETBC7
I installed this 7-pin plug kit on my 2008 Jeep JKU to add power and trailer brake control.
I also purchased :
Draw-Tite I-Command Trailer Brake Controller Item # 5535
and
Curt No-Drill Bracket Item # C57202
along with a little extra wire, just in case.
The kit quality was great. It shipped with everything I needed, sans the controller and bracket above. I used a cordless drill, a quarter inch drive socket set, screwdrivers, wire cutter/crimper, pliers, black electrical tape, half inch loom (plastic flexible conduit) and quite a few extra zip-ties I had laying around. I needed the Curt bracket to mount the 7-pin plug farther away from the muffler that runs parallel to the bumper in Wranglers.
I first ran the grey jacketed wire from the rear bumper all the way to the engine compartment. This was the hard part for me since I'm old and a little more round than I'd like. I didn't need to raise the jeep since it already has a 2 1/2 inch lift. I zip-tied the jacketed wire to the frame and brake lines until I found a spot in the frame I could run it through. I ran it out of the frame at the rear of the left front wheel well and up into the engine compartment. There is a (very handy) rubber plug in the firewall just to the left (outboard) side of the brake vacuum booster. I made a small slit in the rubber plug. I removed the outer jacket from the wire at that spot and fed the white (future brake controller wire) into the cabin of the jeep. I ran the black wire, in a wire loom/conduit across the top of the firewall to the battery. I had enough extra wire to run the brake controller power and ground wire from the battery, across the top of the firewall in the same conduit, and into the cabin through the same rubber plug/grommet. I drilled small pilot holes to mount the two circuit breakers. I then connected the wires at the 7-pin plug at the rear bumper. I again made a pilot hole and then mounted the ground wire with the self-tapping screw provided in the kit.
Here I'd like to mention, I would have been happier with heat-shrink connectors. I could have gone to town and bought some, or I could have soldered the connections. Instead, I just used the provided connectors and a LOT of black tape. If I have any corrosion issues later I will replace the connectors provided in the kit.
I wired and mounted the brake controller. This would have been super easy if I could fit under the dash. I dislike using the little blue inline wire connectors (self stripping connectors) but it was a godsend when working one-handed under the dash. I mounted the controller bracket and covered most of the exposed wiring with black tape for aesthetics.
If I was 20 or 30 years younger, I would have had this whole kit installed in about 1 1/2 hours. I am very happy with the quality of the materials. Many others have already noted the bracket is not quite perfect where it is designed for the four wire plug to slip in. The four wire plug had moved slightly on my 20 minute drive to work and would likely have fallen out if I went much further. I may put a wrap of electrical tape around the plug to tighten up the fit. Otherwise I will see if a zip-tie or a drop of superglue will hold the four wire plug in place. I was a wee bit skeptical about the sturdiness of the no-drill bracket as it's held in place by what looks like a hose clamp. I am happy to report, the clamp is heavy duty and well made. The no-drill bracket with the 7-pin and 4-pin receptacles are very sturdy and secure. The instructional videos on etrailer's website made the job easy to understand.
If I had this job to do over again, I would definitely use the same products from etrailer.
by: Bob J.09/07/2016
I am very satisfied with the Dexter Axle Predator Electric Brake controller. I purchased the Dexter brake controller to be compatible with Dexter car trailer axles on a 16 foot car hauler. The braking unit is very useful when towing in very steep and winding mountain terrain. I feel that the braking is a necessary safety item when towing in a hilly or mountainous environment and the Dexter Predator brake controller provides the great control and driver peace of mind knowing that a heavy load can be managed. The unit installs very easily with the proper adapter.
by: Donnie12/11/2017
GMC Sierra 3500
I have used this on almost a daily basis , love it .
by: Bernard05/16/2023
The controller is on 24/ 7.I wish it turned on with the truck but this is more of a criticism of the truck not the controller I added a toggle switch so I can turn it off when I will not be using the trailer for a long spell.
by: Beck05/28/2022
One year later I'm extremely pleased with this purchase. I often chuckle when I see stock hitches and the whole thing is visible while mine is neatly tucked under with everything hidden except for the 2" receiver. 10/10 have recommended etrailer on many occasions to friends and family for their service and know-how. Since installing my hitch I towed a pop up camper 1500+kms and do frequent trips to the dump or my local dirt and gravel yard for supplies. Love it!
by: Ken D.02/22/2022
Both the 2017 & 2018 Winnebago Forza class A motorhomes DO have in place (under dash) connections for trailer brake controllers, unlike as depicted on your website as needing an additional part (wiring and 4 prong plug), although it is somewhat difficult to find. Attached to the connection socket is an unwired plug (with blue "lips" in somewhat blurry photo). One could either cut and splice the 12" plug-in harness (#20127) into the vehicle connections, or as I did, use solderless socket connections. To determine what wires go where, use an ohmmeter. You will find two b+ wires (use either one) a ground connection, a brake signal wire(use DC voltmeter and press on brake pedal (engine on in diesel pusher) to get reading, and a to trailer wire (bottom left corner when two b+ and ground wire are on right side of socket).
25
737
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- Is the Dexter Predator DX2 Trailer Brake Controller Compatible with a Triple Axle Trailer
- The Dexter Predator DX2 Trailer Brake Controller # 58-8 is only rated for up to 2 axles. If your trailer has 3 axles then I recommend the Tekonsha Primus IQ # TK90160 which is a proven proportional brake controller at a cost-effective price. This also uses the same wiring configuration as the DX2 so if you are splicing it in to your tow vehicle you will use the following:
Blue - 7-Way Output to Trailer
Black - 12V Power
White - Ground
Red - COLD Side of Stop Light Switch (only gets
view full answer... - Trailer Brake Controller Recommendation for a 2014 Chevy Silverado 1500
- If you are concerned there is no where to mount a brake controller (something that comes up a lot since truck interiors are more and more car-like) then I have the perfect solution for you. You can use the Curt Echo Wireless # C51180 that uses a mobile device so it requires no wiring or mounting in your vehicle.
If you determine you want to use a more traditional style controller like the Spectrum # C51170 for a physical button, you will need to cut off the end that plugs into the controller
view full answer... - Best Trailer Brake Controller for 2004 Chevy Blazer
- For a brake controller for your 2004 Chevy Blazer I recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy as it is incredibly reliable, works, well and is easy to use. It can easily
view full answer... - Surge Brakes or Electric Brake Controller for a Trailer Towed by a Motorcycle
- Electric brakes and brake controllers do require adjustment when the trailer changes weight due to adding or removing a load. As long as you remember to do that there is no problem with the brakes being too aggressive.
Surge brakes require a certain amount of momentum, inertia to activate the trailer brakes. The reason you do not see them on trailers towed by motorcycles is because those trailers are light and it does take a lot of pressure to activate the brakes that just isn't present
view full answer... - Brake Controller Installation on 2006 Ford F150
- The brake controller installation on your 2006 F150 is pretty easy. The connector for the brake controller is located under the dash, behind and to the right of the OBD port as shown in the video I've linked for you. You'll need the brake controller wiring adapter, part # 3035-S. The adapter will plug into the connector, and the bare wires on the connector would wire to your Dexter Predator brake controller, color for color.
If your vehicle is equipped with the 7-way trailer connector,
view full answer... - Brake Controller Does Not Have Full Power When Used
- First, I would go to the 7-way connector and test to make sure you have power. You will want to use a circuit tester, part # PTW2993 to test the wires. Start by testing the Black wire for power, then test the blue wire for brake controller output. To test the blue wire you will need to have a friend help you. With the vehicle in power accessory mode, in park, and parking brake engaged, have them activate the brakes.
Next I would check to make sure the Red Stoplight wire is connected
view full answer... - How to Wire a Dexter Axle Predator Brake Controller 58-8 on a 2001 GMC Sierra
- The light blue wire mentioned in the video of the # HM40975-11998 7 and 4-pole trailer connector being installed on a 2002 Silverado is for a camper shell brake light, and is not for use with an electric brake controller.
The electric brake wire on your 2001 GMC Sierra is run from the port below the dash into the engine compartment, but it does not continue back to the rear wiring bundle. You will need to finish the connection by running a wire from the 7-Way in the rear of the truck
view full answer... - Parts Needed to Install Dexter Predator Trailer Brake Controller 58-8 in 1999 Toyota 4Runner
- Since you already have a 4-pole harness on your 1999 Toyota 4Runner all you need to install the Dexter Predator Trailer Brake Controller # 58-8 is our all-inclusive installation kit # ETBC7.
This kit includes a combo 4-pole/7-way trailer socket, all connectors, wiring, circuit breakers, etc that are required for wiring in the controller and having a fully-functioning 4/7-way.
An installation article and video for this kit are linked for your review.
view full answer... - Trailer Brakes Lock Up When Brake Pedal is Pressed Even With Controller Turned All the Way Down
- Have you tried towing the trailer with another truck? Or towing another trailer with the Dodge? This would help you narrow down whether the problem is with the wiring on the vehicle or the trailer.
From what you're describing, it sounds like either something's incorrectly wired on the vehicle or trailer, or the trailer connector on the vehicle is damaged or corroded.
This is kind of a strange occurrence, so try what I've mentioned above and get back with me. I've also linked you
view full answer... - Troubleshooting No Truck Brake Lights When Manual Override Used on Dexter Predator Brake Controller
- According to the Dexter Predator # 58-8 Brake Controller installation instructions, if your truck lights are not illuminating properly with the manual override is activated, then you will need to check the red stoplight wiring connection. The brake controller red wire should be connected to the non-powered stop lamp switch wire on your 2008 GMC Sierra.
On your specific truck there should be a wiring bundle that is below the steering column, and is to the left of the brake pedal. This
view full answer... - When to Use a 20 or 30 amp Circuit Breaker When Installing Brake Controller
- You'd want to use the 20 amp circuit breaker like # PK54220PL unless your trailer has more than two brake axles. If that's the case you'd want to use the 30 amp breaker # 38630.
view full answer... - Display of Dexter 58-8 DX 2 Predator Brake Controller Lights Up Without Trailer Connected
- According to Dexter Axle, it's perfectly normal for the display to light up and display .0 when a trailer isn't connected.
This will happen regardless of if the vehicle is running, as the controller has a constant 12V connection to the vehicle battery.
view full answer... - Fuse and Circuit Breaker Installation Help For Dexter Predator Brake Controller in 2008 GMC Sierra
- When installing the Dexter Predator Brake Controller # 58-8 in your 2008 GMC Sierra you will want to follow the Dexter instructions and install the specified fuse and self-resetting circuit breaker as indicated.
The vehicle manufacturer installs fuses to protect the OEM electrical components in the vehicle so any aftermarket accessory that is added will need to be protected independently of the factory fuses and circuit breakers.
To correctly install the Dexter Predator you will
view full answer... - Troubleshooting Electric Brakes with Dexter DX2 Controller
- The manual override lever does not move when you hit your brake pedal but the digital display will light up and give you a reading. The slide is only for the manual emergency braking or to apply additional braking pressure to your trailer as desired and should not move when you hit your brake pedal at all. The description you gave is that your manual override is sticking and not releasing the braking pressure some of the time which would definitely lead to burning up your brake shoes
view full answer... - Will the Dexter Preadator Brake Controller # 58-8 fit a 2006 Cadillac SRX
- Yes, there is a way to install the Dexter Axle Predator Electric Brake Controller # 58-8 in your 2006 Cadillac SRX. The first thing you need is a 4-way trailer connection at the rear of your vehicle. You may already have this, but if not you will need part # C59496. This comes with everything you would need to install the 4-way, I attached install instructions and an install video for you to check out also.
Next, you need to convert the 4-way to a 7-way so that you can install the brake
view full answer... - Where Do the 4 Wires of a Brake Controller Go for Installation in Vehicle
- The four wires and their functions are:
White: Ground wire, connected to negative side of battery.
Blue: Electric brake wire, ran to the brake output circuit of your 7-way with 10 gauge wire like # 10-1-1 sold by the foot.
Black: 12v power wire, connected to the vehicle positive battery terminal with a 40amp circuit breaker, part # 9510.
Red: Stoplight switch circuit. This will get run to the wire on your stoplight pedal assembly that sees voltage only when the brakes are applied.
view full answer... - How to Install a Brake Controller in a 1996 Dodge Ram
- If your 1996 Dodge Ram has the factory 7-way connector at the rear of the vehicle, then all of the wires for the brake controller have been run. You will just need a brake controller wiring adapter. I recommend using part # 3020-P and cutting off the black plug. This adapter plugs into the brake controller plug under the dash, to the left of the steering column taped to another harness near the emergency brake pedal. The four pigtail wires on the other end will be butt-connected to the
view full answer... - Brake Wire for Installation of Dexter Predator Trailer Brake Controller in 2006 Dodge Ram 2500
- When installing the Dexter Predator DX2 Trailer Brake Controller # 58-8 with Wiring Adapter # 3020-S in your 2006 Dodge Ram 2500, the blue wire from the brake controller will connect to the blue wire from the harness.
I have added links to help articles on brake controllers and brake controller installation for you to check out as well.
view full answer... - Troubleshooting Low Power Output for Predator DX2 Brake Controller
- It sounds like you've done a good amount of troubleshooting already which gives us a good foundation to work off of.
Since your Dexter Predator DX2 Trailer Brake Controller # 58-8 isn't supplying more than 3.2 for power this tells me that 1 of 2 things is going on; either there isn't enough power getting to the controller and is limiting it, or something is internally wrong with the controller.
Start off by checking the wires connected to the controller first. The white should have
view full answer... - Parts Needed to Install Trailer Brake Controller in 1993 and 1994 Chevy C/K Trucks
- Installing a Dexter Predator DX2 Trailer Brake Controller # 58-8 in a 1993 Chevy Silverado and 1994 Chevy Cheyenne, both of which are Chevy C/K Series pickup trucks, require both trucks to have their own 4-flat connectors and a brake controller wiring kit. However, since both trucks require the Predator to be hardwired, it would mean you would have to get two brake controllers or you would need to wire and un-wire the controller to change trucks; there are better options that will allow
view full answer... - Troubleshooting Hopkins Reliance Brake Controller on 2008 GMC Sierra 1500
- The first suggestion I have is to replace the Hopkins Reliance brake controller, which despite its name is an unreliable brake controller, to say the least. You can still get an economical brake controller that is far more reliable with the Brake EVN # TK63VR with Brake Control Harness # 20127 for your 2008 GMC Sierra 1500.
In regards to the issue you are having, an E1 code on the Reliance means a trailer is not connected and there are a number of potential issues you will need to troubleshoot
view full answer... - Brake Controller Install Harness Recommendation for a 2014 Toyota Tacoma
- To install your Prodigy P2 # 90885 in your 2014 Toyota Tacoma you would need the install harness part # 3040-P as it has been custom fit for your truck. This harness is 32 inches in length.
I attached an install video that shows this harness being installed in a similar Tacoma as yours.
view full answer... - Brake Controller Wiring for 2007 GMC Sierra New Body
- When installing the Brake EVN # TK63VR to your 2007 GMC Sierra New Body with the factory tow package, you can attach the red wire of the Brake Control Plug-In Harness # 20127 to either the light blue wire or the orange wire, which are brake light wires (CHMSL stands for Center High Mounted Stop Light).
I have added a link to a help article on installing a brake controller on your generation of Sierra which I strongly recommend reading.
view full answer... - Trailer Brake Controller for 2007 GMC Sierra With Factory Towing Package
- Based on my research, your 2017 Rockwood A215HW does indeed have electric trailer brakes. So for your 2007 GMC Sierra, since you have the towing package with the factory 7-way, all you will need is a trailer brake controller and the correct wiring harness. For the brake controller, I highly recommend an option from Draw-Tite:
- Brake EVNÂ Trailer Brake Controller # TK63VR
I love the Brake EVN because it is a great value with its unique combination of quality and cost-effectiveness.
view full answer... - Replacement Brake Control Plug-In Harness For Tekonsha And Draw-Tite Brake Controllers
- If you're referring to the plug-in harness, we have the Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller # 20127.
This will work with the Tekonsha P3, Voyager, Prodigy, and Primus Brake Controllers. Also works with Draw-Tite Intella-stop Xtreme, Intella-stop Ultra, Intella-stop Digital, and Activator III (5520) brake controllers.
If this isn't what you're looking for, let me know and I'd be glad to assist you.
view full answer... - Will Tekonsha Voyager Brake Controller Work on Truck With Air Brakes
- You can install the Tekonsha Voyager Trailer Brake Controller # 39510 in your 2000 Kenworth truck in the exact same manner as you would a standard passenger vehicle. Your truck has a brake light switch as you mentioned, so you will wire the Voyager in the same way, and you'll also need the Brake Control Harness # 20127.
I have added a link below to a video review for you to check out as well if you'd like of the Tekonsha Voyager Trailer Brake Controller # 39510.
view full answer... - Does Brake Controller Install in 2013 Toyota Tacoma Without Factory 7-Way Require Installation Kit
- I'm not entirely sure what brake controller or wiring you have on your 2013 Toyota Tacoma, but I can tell you that to add a brake controller to your Tacoma you will need to first add Wiring Harness with 4-Pole Flat Trailer Connector # 118496 and then the Universal Installation Kit for Trailer Brake Controller # ETBC7. This is the only way you will be able to add a 7-way and brake controller since you do not have a factory 7-way on your '13 Tacoma.
Once you have installed these you will
view full answer... - Plug-In Trailer Brake Wiring Adapter For A 2007 Toyota Tacoma
- The Tekonsha Plug-In Wiring Adapter 3040-P does not fit your 2007 Toyota Tacoma because this is for vehicles with the factory tow package.
Your only option is to hardwire the harness with the Pigtail Wiring Harness for Tekonsha and Draw-Tite Trailer Brake Controller # 20127.
You're also going to need to add a 4-way # C55513 and a 7-way # ETBC7 if one is not present.
I have attached a couple of videos for you to check out as well.
view full answer... - What Do I Need to Wire a Basic 4-Way Trailer Connector on a 1996 Toyota Tacoma Pickup
- Since the 1996 Toyota Tacoma has separate turn and brake signals, a converter is necessary. Fortunately, there is a plug-and-play harness, part # 118379, available for your Tacoma that makes installing very easy. It simply plugs in-line with the tail light connectors behind the tail light housings. Then you connect the ground wire to a good ground point on the truck frame and you are done.
I have added a link to the part and a video of it being installed on a 2000 Tacoma. I have also
view full answer... - Trailer Brakes Only Working With Manual Override on 2011 GMC Sierra
- If your trailer brakes are only working when you apply the manual override the issue is commonly the red wire - the stop light switch. Make sure it is connected to the circuit that that only sees voltage when the brakes are applied. The issue with not displaying numbers does make me think that the brake controller may have hit the fritz and need to be replaced though, and this would be true if the numbers never display, even when using the manual override.
For your 2011 GMC Sierra a
view full answer... - Parts Needed to Install a Brake Controller in a 2013 Ford Edge
- You will need to hardwire in a brake controller on your 2013 Ford Edge.
First you will need to convert the 4-way to a 7-way. For that you will need an Brake Controller Installation Kit # ETBC7. This comes with everything you will need to install a fully functional 7-way and brake controller in your vehicle. I attached installation instructions and an install video for this product for you to check out.
If you do not have a brake controller picked out yet check out the Prodigy P2
view full answer... - Installing Brake Controller on 2013 Dodge Grand Caravan with FactoryTow Package
- It sounds like your Grand Caravan is wired like the Jeep Grand Cherokee. I have confirmed this by speaking with my contact at Tekonsha. He tells me that the wire you located is indeed the brake control output circuit. This wire would be ran through the firewall and would connect to the blue wire on the brake controller.
To complete the installation, you will connect the white wire of the controller pigtail # 20127 to the negative battery terminal, the black controller wire to the positive
view full answer... - Parts Needed to Install an Electric Brake Controller in a 2016 Toyota Highlander with Tow Package
- To install your Prodigy P3 Electric Brake Controller # 90195 into a 2016 Toyota Highlander you can use the wiring harness # 20127. This will plug into the P3 and then hardwire under your dashboard.
If the Highlander needs a 4-way trailer connector the Curt Wiring Harness # 56042 will provide one for you. Then you can use the install kit # ETBC7 to add a 7-way and all of wiring to power your trailer's brakes. If you already have a 4-way then just add the # ETBC7. If you already have
view full answer... - Installing a Brake Controller on 2013 Mazda CX-5 with 7-Way Installed
- Since you have a 7-Way you will only need a few more components to complete a brake controller install on your vehicle.
For a wiring kit to install the brake controller and the 7-way adapter you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This will provide the power source and ground for the wiring for the brake controller. You will need to test the wires from the brake pedal switch of your vehicle to find a circuit that has voltage when the brakes
view full answer... - Economical Easy to Install Brake Controller for 2011 Chevy Silverado
- The easiest to install and setup brake controller we offer that's at a great price is the Tekonsha PowerTrac part # 39523 which requires harness part # 20127.
Connect the four wires on the brake controller adapter (20127) to the tow package wires. Follow the table below to connect the tow package wires and adapter wires using butt connectors. I also attached an install video as well.
view full answer... - Location of Brake Controller Wires on a 2009 Chevrolet Avalanche
- The wiring harness used to install a brake controller on your 2009 Chevrolet Avalanche would have been present regardless of whether or not your truck came with a factory trailer connector. If you take a look at the :20 mark in the attached video, the location of the wires will be revealed. Please note that these are blunt cut wires taped to an existing plug. In order to install your Reese brake controller you will also need the pigtail part # 20127 if you do not already have one.
If
view full answer... - Brake Controller Pigtail Wiring Harness For Infiniti QX 80
- We do carry wiring pigtails for Tekonsha prodigy trailer Brake Controllers that will work on your 2014 Infiniti QX80. I have attached a link to a help article that explains installation of a brake controller.
If you are looking for just the pigtail that attaches to the controller I recommend the Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller, part # 20127. This harness has 12 inch wire leads.
If you prefer a harness with longer wire leads, I recommend the
view full answer... - Where to Splice Brake Light Wire From Brake Controller To Stoplight Wire
- Since your vehicle does not have a brake controller port, you will want to use a universal wiring pigtail. For example, if you have a Tekonsha brake controller, you could use a Plug-In Harness for Tekonsha and Draw-Tite Brake Controllers # 20127. You will want to use a circuit tester, like # PTW2993, to test the wires at the stoplight switch at the back of your brake pedal to find the wire that only has signal when the brake pedal is depressed.
Once you have found the wire that only
view full answer... - Electric Trailer Brake Controller Recommendation for a 2009 Volkswagen Touareg TDI
- I recommend the Tekonsha P2, # 90885. It is one of our highest rated and most popular brake controller models. If your Touareg has a factory tow package, then you will just need to connect the wires from the brake controller to the tow package wires under the dash.
The tow package wiring may be located behind the lower appearance panel beneath the dash and to the right of the emergency brake pedal. It may be on the left, wrapped in grey foam. I have included a link to an FAQ article
view full answer... - Stop Light Switch Location On A 2015 Jeep Cherokee
- The stop light switch that you will need to connect the red wire to on the Brake Control Plug-In Harness for Tekonsha part # 20127 may be pre ran to a set of wires taped to the underside of the drivers side vehicle dash. If the wires are not present in this location, I recommend installing a stop light switch such as the Roadmaster Stop Light Switch Kit part # RM-751471 to wire the brake controller stop light switch to because of the difficulty and risk of error that is involved when splicing
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Chris R
Test Fit:
Nicholas E
Test Fit:
Shane H
Test Fit:
David F
Test Fit:
Clayton O
Video by:
Andrew L
Video by:
Zach D
Video by:
Jonathan Y
Video by:
Jacob H
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Michael
2/19/2024
After 1 yr and many trips this product has more than exceeded my expectations. Would definitely recommend it to anyone