TorkLift Camper Tie-Downs - Custom Frame Mount - Front
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Part Numbers: TLC2205,TLR3500
Retail:$892.05
Our Price: $854.19
You Save: $37.86
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
part number: TLC2205
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing camper's weight evenly and lowering its center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 front tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
C2205 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
Replaces 30254
Item # TLC2205
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
part number: TLR3500
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Requires drilling into the frame
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit
Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
R3500 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Replaces 39114 and R3502
Item # TLR3500
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- etrailer mistake
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Front - TLC2205
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLR3500
Average Customer Rating: 4.7 out of 5 stars (3168 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Fishride04/17/2024
Torklift tie downs work great!
by: Amos06/23/2020
I originally ordered the incorrect rear Torklifts camper hold downs for my truck. However, I called etrailer and explained my error. They not only helped me pick the correct ones, they sent them out that day. I haven’t installed the rear TC hold downs yet. I was most impressed with the free shipping both ways with no questions asked! I was issued an RMA and the refund came quickly. Very good customer service in an age when there often isn’t any service , let alone great service. The front mounts fit perfectly!
by: Richard E07/28/2017
Installed on a Curt 2 1/2 receiver just put on my F350 SD Supercab Diesel SRW 4x4. This bracket does fit this truck with the Curt receiver. I found a little oil on the drill bits and a reamer to remove the last bit of metal from the holes in the receiver helped mount the brackets.
by: Scott02/24/2022
Easy to install. Good quality construction. Great customer care when I ordered the incorrect version - was well handled.
by: Ryan 06/10/2023
These tie downs were exactly what I needed and they arrived very fast! I will definitely buy from etrailer.com again.
by: Patricia 09/21/2023
Delivery was fast. Works perfectly for our Lance slide-in camper.
by: Lyle A.04/16/2014
2004 Chevrolet Silverado 2500
The TLC2205 front camper frame mount fit like a glove on my 2004 2500 HD Chevy.Going to get the torklift super hitch next and the rear torklift camper mounts that bolt to the super hitch.etrailer is a great place to buy from.Going to get a lot more things for my truck. Thank you very much. Lyle K Anglemyer
by: eddyjames08/24/2016
looks good, easy to install and replaced the torklift tie downs used on factory hitch, now I have a 20,000 lb trailer hitch with 2,700 GTW also. and camper is secure.
Edward J.
8/25/2017
Fantastic, just like they were claimed to do
by: Matt 03/30/2023
Super easy to install, I recommend using some masking tape on the hitch to mark where you want to install these.
by: Alexei10/31/2023
These are the gold standard. Relatively easy to install with few simple tools. Less than 2 hours. Easy to remove / add as the camper is moved from the truck. I would purchase again.
by: James06/08/2020
Have not actually used them yet, but they are sturdy and well positioned, and the installation was fairly easy, although I had to grind a very small (less than 1/8') off the bottom of the passenger side plate that goes inside the frame in order to get both bolts in. I don't have a camper yet, but may get the rear tie-downs, depending on size and weight of what I get. Will use bumper brackets for now. I did not think the bed mount type of tie-down would be enough for anything but a very light camper, and the through the bed into the frame type didn't appeal to me much. Not having to drill any holes was a plus, although I would have done it if necessary to get the strength I wanted. Although these tie-downs mount in a somewhat unusual way, I think they will be very functional, strong, and convenient.
by: Kris 11/30/2021
Best product for overhead camper tie-downs period. Instructions could use a little more detail and/clearer picture, but installation was relatively easy and only took approx. 2hrs to install. Much more secure than bed/bumper or stake pocket type tie downs.
by: Kent03/11/2020
Nicole at etrailer was sharp and the products - 5 stars for her
The Torklift instruction pictures are poor - look like they have been copied 100 times.
Front brackets were fairly straight forward - but had to remove a skid plate and loosen the fuel tank to install the drivers side.
Rear brackets needed to drill holes. T L should provide a drill template.
Haven’t used with the camper yet.
by: Jon 01/02/2022
After reviewing my options to hold a 3500lb trailer on my truck. I decided these were the only option. They are more expensive then the other options that bolt to the body and the bumper, But much more secure.
The install was fairly easy, Customer service from etrailer was awesome. When not in use they are barely visible. Great product, worth every penny!
Thanks again
by: Curt M.07/17/2019
Both the product and the service are top notch. I ordered the front and rear tie-downs for a 2006 Silverado. The easy to follow instructions made it easy to install the customized tie downs. We have been on the road several times since I installed the tie downs and all the miles I've traveled were with confidence that my camper was secure.
Oh, the other great feature is that they are removable when not in use.
Thank you etrailer!
by: Brian03/01/2019
Part of an order I made for camper tie-downs. Great product and it shipped extremely fast!
I always go to e-trailer first when looking for truck towing or other truck accessories. The customer service and speed of shipping really can’t be beat.
by: Chad04/06/2017
2002 Chevrolet Silverado
The Tork lift camper tie downs are perfect. Very solid and easy to use, the installation instructions are pretty vague but once you look at it it is pretty self-explanatory?. Etrailer shipped them fast and free. Very happy camper here!!!
by: William 04/12/2021
End result was great. The existing bolts that have to be removed to mount each support arm can be quite rusty. I recommend hosing them down with penetration fluid and waiting 24 hours until trying to remove. Clever "drilless" mounting scheme. Will work very well.
by: Bryce 08/05/2023
Product showed up and fit like I was told it would. I have talked with 3 different employees from this company they have all been such a great help. There customer service is great.
by: Richard02/27/2022
Solid, easy to install. etrailer is the only site i even look at now.
by: Joseph 07/29/2023
Very fast and affordable shipping to AL ASKA!
by: Philip02/14/2019
These safety downs are easy to install, and are a huge safety bonus. The interlocking pin prepares truck for winter in a few seconds. E-trailer, in this case
Julie, answered all questions, very professional, and was a big help , Thanks
by: Susan05/18/2016
Super satisfied with the tie-downs. No drilling required. They are almost invisible when not in use. I am also very happy with etrailer's customer service. Excellent communication on order status and tracking. Looking forward to shopping with you again.
by: Jeremy06/11/2020
Great tie downs never had any problems keeping my truck camper secure. The instructions that came with them were not very good it took me several tries to get them oriented correctly. I wish they had clearer pictures in their instructions. The ones provided were blurry and not clear.
25
2440
Show More Reviews Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
- Recommended TorkLift Camper Tie-Downs For 2002 Chevy 1500 Short Bed with Aftermarket Trailer Hitch
- For your 2002 Chevy 1500 Short Bed Crew Cab 4x4 (with the # DT45512 hitch you mentioned), you will need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2205 and the Rear # TLR3501. These are the confirmed fit for your truck.
If you don't already have turnbuckles, I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 # TLS9529-2-LK. These lever action turnbuckles are easy to install and reduces stress on
view full answer... - Recommended Camper Tie Downs for a 2007 Chevy Silverado 2500HD w/ a Stock Hitch and No Board or Step
- Thanks for the information! I have a couple of options for you that I have listed below which ones you go with will be determined by the bed length of your 2007 Chevy Silverado 2500HD.
2007 Chevy Silverado 2500HD with a 6-1/2' Bed
TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLC2205
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear item # TLC3205
2007 Chevy Silverado 2500HD with a 8' Bed
TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLC2204
TorkLift
view full answer... - Recommended Camper Tie-Downs And Turnbuckles For A 2002 GMC Sierra
- For a 2002 GMC Sierra 3500 Dually 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2205 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3205.
If you have a 2002 GMC Sierra 3500 Dually 8 Foot Bed without board or step underneath truck bed and with a factory installed hitch I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2204
view full answer... - Which Torklift Tie Downs Fit 2006 Chevy Silverado 2500 Short Bed without Steps and w Factory Hitch
- The front and rear Torklift tie downs you need for your 2006 Chevy Silverado 2500 short bed without steps and a factory hitch are the part numbers # TLC2205 and # TLC3205.
view full answer... - Recommended Camper Tie Downs for a 2010 Chevrolet Silverado 2500 HD
- Matej, If you're not comfortable using Happijac tie downs then you can absolutely use the TorkLift Camper Tie-Downs # TLC2205 for the front, and # TLC3209 for the rear.
These are American made, custom fit to your vehicle so it'll bolt right up to the frame, and is virtually invisible when installed. You're also going to need a set of tie downs # TLS9526-2-LK to secure your camper to the tie downs.
view full answer... - Recommended Frame Mounted Camper Tie-Downs For A 2001 Chevy Silverado 2500
- The distinction you're referring to is about whether or not your Silverado has running boards or steps that sit under the bed and could block the fitment of a frame mounted camper tie-down. The hitch stipulation is in place because some people will install a TorkLift SuperHitch and they offer tie-downs that can be easily bolted to it instead of mounting separately to the frame.
If you do not have running boards or a step in the way then yes, the TorkLift Custom Frame-Mounted Camper
view full answer... - Front and Rear Torklift Tie Downs that Fit 2003 Chevy Silverado 1500HD Short Bed Without Steps
- The Torklift tie down part numbers you mentioned are for front and rear tie downs with the part # TLC2205 being the front and the # TLC3205 being the rear one.
Torklift does not offer a way to get just the frame brackets at this time though.
view full answer... - Camper Tie-Downs For 2004 Chevrolet Silverado That Requires No Drilling In The Truck Frame
- We do carry a camper tie-down system that will work for your 2004 Chevrolet Silverado without drilling into the truck frame.
I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs, for your Silverado. This system includes the front and the rear tie-downs and can be easily removed when you are not using your camper. This is made in the USA and has a lifetime warranty. To order this system you need to order part # TLC2205, and part # TLC3205.
view full answer... - TorkLift Camper Tie Downs for a 2010 GMC Sierra 2500 Crew Cab with a 6-1/2' Bed and Factory Hitch
- Your 2010 GMC Sierra 2500 Crew Cab seems to have standard running boards under the cab that do not extend under the truck bed. For that, you would use the fitguide option for the one without the step underneath the bed.
For this option, HappiJac is not available, so TorkLift is the way to go. I recommend the TorkLift Front and Rear Custom Tie Downs for your vehicle, part # TLC2205 and part # TLC3209. No drilling is required for these as they mount to the specific attachment points of
view full answer... - Recommended Camper Tie-Downs And Turnbuckles For 2001 GMC Sierra 1500
- The camper tie-downs that are designed to work wit your Sierra are the TorkLift Custom Frame-Mounted Camper Tie-Downs.
This includes the tie-downs for the front and the rear of your truck bed. This system comes with the tie-down inserts, frame brackets, and necessary hardware needed for installation, and can be easily removed when you are not using your camper.
For the front tie-downs you will need part # TLC2205, and for the rear you will need part # TLC3205.
I also recommend
view full answer... - Tie-Downs for 2003 Chevy Silverado 2500HD With 6-1/2 Foot Bed, Cab-Length Boards & OEM Hitch
- Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all distinct to the factory hitch. So for your '03 Silverado 2500HD with a 6-1/2 foot bed, cab-length boards, and factory hitch the tie-downs you need are the following:
- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2205
- Rear:
view full answer... - TorkLift Camper Tie Downs for 2006 Chevy Silverado 2500HD Short Bed, with Cab Steps and Reese Hitch
- If the tube step on your 2006 Chevy Silverado 2500 short bed is only under the cab of the truck and no part of it is attached beyond the back of the cab then you would look at the tie downs for models without a board or step under the truck bed and with a non-TorkLift aftermarket hitch.
For the front you could then use # TLC2205. For the rear, # TLR3501. The rear tie downs will only work on aftermarket hitches that have side plates with at least a 4" x 4" footprint which seems to be
view full answer... - Recommended TorkLift Frame-Mounted Camper Tie-Downs for 2007 GMC 2500 With Aftermarket Hitch
- Yes, you are correct. For a 2007 GMC Sierra Classic 2500HD Crew Cab with 6-1/2' bed and Class V Curt Trailer Hitch Receiver, # C15302 installed, the TorkLift Custom Frame-Mounted Camper Rear Tie-Downs, # TLR3500 will fit.
For front, use TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2205.
view full answer... - Recommended Camper Tie Downs for a 2017 Chevrolet Silverado 3500 With an Aftermarket Hitch
- I did some research and it looks like for your 2017 Chevrolet Silverado 3500 you can use the TorkLift Camper Tie-Downs # TLC2220 for the front it you have a 6 1/2' bed or the TorkLift Camper Tie-Downs # TLC2219 if you have an 8' bed.
And for the rear you'll just need the TorkLift Camper Tie-Downs # TLR3500. Finally, you'll just need a set of turnbuckles # TLS9529-2-LK to secure the camper to your tie downs.
view full answer... - Installing Frame-Mount Camper Tie-Down On 1984 Chevrolet C/K Pickup Truck
- We do not have a custom tie-down kit for your 1984 Chevrolet pickup but I may have a solution for you.
I called my contact at TorkLift and they told me that you can look under the front of yoru truck bed near the cab and see if you have a 4x4 inch space available, you can install part # TLR3500. You would need to drill through the 4x4 space on your frame to mount the tie-downs for your camper.
For the rear you can use the same tie-downs but you will need the same 4x4 inch space
view full answer... - Rear TorkLift Camper Tie Downs for 2007 Ford F-350 with 8 Foot Bed and Aftermarket Hitch
- For the 2007 Ford F-350 8 foot bed with an aftermarket (but non-TorkLift) hitch installed and no step or board beneath the bed, the correct rear camper tie-down kit is the TorkLift # TLR3500. For the front kit you will use part # TLF2011.
I have attached a sample install video below that you can also check out.
view full answer... - Recommended Camper Tie Downs for 1999 Toyota Tacoma
- For your 1999 Toyota Tacoma, you will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3500 to go with the front # TLT2306. This is a confirmed fit for your vehicle as long as you don't have the factory trailer hitch receiver.
You may also be interested in the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000. The spring loaded barrels minimize the stress on your tie-down points yet are sturdy to allow you to firmly tighten them down.
view full answer... - Rear Tie-Down Recommendation for My 2006 Ford F-350 Super Duty
- When determining if rear Torklift tie-downs are available for your 2006 Ford F-350 Super Duty, it truly depends on your bed length, what hitch model you have installed (if any), or if you have a board/step underneath your truck.
For example, if you have a 6-3/4' bed with a non-Torklift aftermarket hitch with a board or step underneath your bed, the rear Torklift tie-downs you would need are the # TLR3500.
In order to determine if any are available for your 2006 Ford F-350, feel free
view full answer... - 2008 Toyota Tundra In Bed Camper Tie Down Recommendation
- For your 2008 Toyota Tudra 6.5' bed you want the TorkLift Custom Frame-Mounted Camper Tie-Downs Front part # TLT2304 and rear part # TLR3500. These are designed specifically for your truck and will provide excellent tie down locations for your in bed camper.
The TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs part # TLS9020 really make loading and unloading very easy.
view full answer... - Will The TorkLift Frame-Mounted Camper Tie-Downs Fit On My Ford F-250
- Yes. The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3500 is confirmed for the 1997 Ford F-150 and F-250 Light Duty 8 Foot Bed - without board or step underneath truck bed and with a non-Torklift aftermarket hitch.
The TorkLift tie-downs are designed to be mounted to your frame for better weight distribution and to lower the center of gravity.
Here is a link to our turnbuckles as you will need these if you do not have some already.
view full answer... - Is Drilling Needed on 2011 Ford F-350 Short Bed to Install Front TorkLift Camper Tie-Downs
- I checked directly with TorkLift for you, and verified that you do NOT have to drill into your 2011 Ford F-350 short bed to install the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2012.
Then to complete your set up, the correct tie-downs for the rear will depend on if you have a factory hitch on your 2011 Ford F-350 or an aftermarket hitch.
- Factory OEM Hitch: TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3006
- Aftermarket Hitch: TorkLift Custom
view full answer... - How do Torklift # TLR3500 Rear Camper Tiedowns Attach to 2012 Toyota Tacoma
- The Torklift # TLR3500 rear tiedowns would mount to holes drilled in the side plate of your aftermarket hitch. The front tiedowns, part # TLT2303 would mount to the truck frame. If you click the provided links, you an see the installation instructions for both the front and the rear tiedowns.
The video linked showing the # TLR3500 being installed on a 2008 Tundra would also apply to your Tacoma. The tiedowns aren't a completely vehicle specific item, given part numbers will fit many
view full answer... - Correct Torklift Turnbuckles For A 2020 Ford F-350 6.75' Bed Supercab
- Hello Joe. I can definitely help get you set up with Torklift Camper Tie Downs for your 2020 Ford F350. Does your truck have a trailer hitch installed on the back? If so, was it installed from the factory or aftermarket? Let me know because that will determine the correct rear tie downs. The # TLF2022 front tie downs will be correct for your truck. The rear tie downs will be determined by the type of trailer hitch on your truck.
The # TLR3500 are for trucks with a non-Torklift brand aftermarket
view full answer... - Correct TorkLift Truck Camper Tie Down Kit for 2003 Chevy Silverado 2500HD with Aftermarket Hitch
- For the 2003 Chevy Silverado 2500 with 6-1/2-foot bed, without step and with a non-TorkLift aftermarket hitch installed our Fit Guide does show part # TLR3500 as the rear tie-down along with part # TLC2202 as the front. Please refer to the linked page.
view full answer... - Aftermarket Hitches Compatible with TorkLift Rear Camper Tie Down TLR3500
- If your 1999 Dodge Ram 3500 is an 8-foot bed without a board or step underneath truck bed and with a non-Torklift aftermarket hitch, then you will use TorkLift rear camper tie-down kit # TLR3500 that you referenced.
All aftermarket trailer hitch fits for the long bed with standard/step bumper are shown on the linked page. Among these are Class III hitch # 75101 from Draw-Tite, Class IV hitch # 14001 from Curt, and Class V hitch # BWHDRH25132.
view full answer... - Custom Rear Camper Tie Downs For A 2005 Toyota Tacoma With Aftermarket Hitch
- If your 2005 Toyota Tacoma is 2WD you can use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3500, or if you have 4WD, you can use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3500.
However, both of these kits will require drilling into the frame, but the 2 Rear tie-down inserts, frame brackets, and necessary hardware is included.
view full answer...
TorkLift Accessories
Fit to this rack on your 2010 GMC Sierra
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video by:
Kathleen M
Test Fit:
Randy B
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Isabelle B
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Scott
3/24/2023
Still working great after a year. No issues.