Filter Products
Filter Results
$54.44 - $55.60
$55.11 - $55.11
Filter by Type of Window
$54.44 - $55.60
$55.11 - $55.11
Videos
for UTV Windshields
Help Articles
for UTV Windshields
Expert Answers
for UTV Windshields
The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #GY68GR is roughly 2" shorter than the Lippert 1621 pin box. I've attached a dimensional drawing of #GY68GR for you to check out as well.
view full answer...Gen-Y's calculation for pin weight is a safe guess, but isn't the most accurate so the only way you'll get the correct capacity Gen-Y 5th Wheel Pin Box is to fully load the trailer and go to a commercial scale to measure the…
view full answer...You can absolutely go from your current 3-1/4 inch shackle straps to the 3-1/8 inch shackle straps of the MORryde upgrade kit for tandem axle trailers. That 1/8 inch difference in length will not be a factor for your ride or the fit; the correct kit…
view full answer...On trailer brakes the small shoe points towards the front of the trailer, and the larger shoe points towards the rear. This allows the trailer brakes to apply correctly when the magnet for electric brakes is activated, or the wheel cylinder is…
view full answer...Thank you for the information and photo! I was able to determine that you have a 1621 SHD (super heavy duty) pin box rated for 21K. The Gen-Y equivalent is found as part #GY68GR for a 4.5K tongue weight or part #GY46FR for a 5.5K tongue weight. While…
view full answer...I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…
view full answer...Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
view full answer...The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box part #GY36FR is really not much different than a standard fixed pin box in regards to turning clearance. The actual distance from the center of the coupler to the first set of holes on…
view full answer...For all intents and purposes there is no difference between the Lippert 1621SHD part #LC1387882 and the Lippert 1621 #LC1387883.
view full answer...The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…
view full answer...The strap I would recommend is the part #EM58523 with the Erickson E-Chock Wheel Chocks #EM09162-2 that you referenced. This strap attaches to the slots of the E-track like the chocks so it will install easily and work well.
view full answer...There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…
view full answer...