2014 Honda Ridgeline Truck Bed Mat

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the…

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system…

Hey Jeff, the WeatherTech ImpactLiner Custom Truck Bed Mat #WT99KF would get secured to your bed using the TechHold Retention Device (see image attached) which is just a adhesive ball and socket. Basically, one the ball end would get stuck to the…

Yes it is. The Black Armour Heavy-Duty Custom Truck Bed Mat item #BA67AR does come in two parts. This mat is confirmed to fit the 8' bed length of the 2022 Ford F-250. We do have a one piece option for a custom fit rubber…

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to…

The Westin Custom Fit Truck Bed Mat #50-6405 will fit perfectly in your 2022 Ford F-250 Super Duty Short Bed and you won't need to trim anything! Just be mindful that these come rolled up in a box so you'll…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

When a camper is loaded on a pickup truck bed there will be a gap between the truck bed rails and the underside of the camper as you show in your photo. No worries there. For your camper tie-downs, it loos as though you have attached the rear ones…

Yes, the #TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the #TLD3112 if you have the factory hitch or #TLR3510 if you have the TorkLift SuperHitch Magnum 30K.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you…

The correct BedRug bed mat for beds with a drop-in liner for a 2011 Ford F-150 with a 5-1/2' bed would be part #BMQ04SCD. The #BMQ04SBD you were looking at would be a fit for a 6-1/2' bed. If you need anything…

Hey Alban, since you have a Blue Ox tow bar #BX7365 already and their flat towing setups are really nice and easy to use I would recommend going with a Blue Ox base plate kit like the part #BLU85CR which is a fit for your 2024 Chevy Colorado. For…