Luma LED Bulbs - 7443 - 360 Degree - 48 Diodes - Cool White - Qty 2

Video Transcript for Luma LEDs Vehicle Lights - Replacement Bulbs - 74432-D24SMD-CW Review

Speaker 1: Today, we're taking a look at the LUMA LEB bulbs. To ensure that these will fit your vehicle, you can always use the vehicle fit guide located at etrailer.com. When used as an LED bulb for vehicles, they replace the old dual filament incandescent bulbs for tail lights, turn signals and brake lights. The replacement bulbs fit directly into the original factory light sockets. The base type on these bulbs is 7440 or T20. This is a replacement bulb for Bulb #7444NA.

The unit features bright white light produced by 48 LEDs, that's 24 LEDs per bulb. The light is emitted 360 degrees around the bulb. It does feature surface mount technology when it comes to the construction of the LED circuit board. LEDs are great replacements for incandescent lights. They last longer, burn brighter and they're much more efficient.

You don't have to worry about replacing bulbs or worry about vertical 00:00:57 filaments. They have a 50,000-hour LED lifespan.When it comes to the dimensions of each bulb, it's 5/8 of an inch in diameter by 1 7/8 inch long. We're going to go and turn off the overhead lights so you can see it in a lower light setting. The light output is 380 lumens per bulb, when combined that's 760. Operating voltage is 9-volt to 16-volt DC.

The power withdrawal at 14.3 volt DC is 0.2 Amps or 2.86 watts. This would be the tail light function. Then you can see how the signal output increases when the brake light is activated. It'll do that same thing when the turn signal is activated. That's going to do it for today's look at the LUMA LED bulbs..