To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.
Features:
Rhino-Rack HD Crossbars - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on this 2010 Chevrolet Silverado we are going to install a roof rack from Rhino Rack. We will be using part number DA1375 for the crossbars and it is their elliptical design. And we will also use the pad and clamp kit part number DK227. We have our bars already assembled. We measured out our front rail at 118 millimeters. We measured from here to the inside edge here. And our measurement for our back rail is going to be 109 millimeters. Alright, we have our bars set up. Let us go ahead and start installing the front crossbar. Measure the center of the door jamb to the center of the crossbar. We are going to measure out 9-27/32. 0:38
Once we have our first rail installed, we will go ahead and measure from the center of that one to the back rail. And that measurement will be 31-1/2 inches. Then you go ahead and tighten them down. Using the included tool that comes with the roof rack, we will just snug them down on both sides. Once we have the Rhino Rack installed, we will go ahead and put the covers on the legs and lock them down into place. Alright, with a few easy steps, our Rhino Rack is already installed on the vehicle and ready for service. And there you have it for part number DA1375 and we also used the pad and clamp kit part number DK227.
Average Customer Rating: 4.6 out of 5 stars (115 Customer Reviews)
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.I’ve had this rhino rack for over 3 years and it’s been excellent on long road trips to the ski slopes. A year after my purchase, I realized that I was missing the plastic coverings that attached to the end of the bars and called their customer service to resolve the missing pieces. I was impressed with their quick response and seamless delivery.
The rack fit well and was easy to install. Seems to be made well. The problem is the amount of road noise. I never even put the basket on. It was so loud, it roared. I repositioned it several times but the noise was way too much and I finally just removed it. I spent a lot of money for the rack and the basket and now they are in storage. I wish it would have worked out better because I thought it looked really good.
Solid product that fit well with the other components.
This has been a disaster, and terrible experience from the start. Original product Rhino roof rack ($188.00) misrepresented for sale, even called and was told all parts were included as "Open Box" item. Received item with missing parts and mismatched parts, then ET sent wrong parts (Legs) causing having to order these cross bars ($192.00) to fit parts sent (Legs). Now my $300.00 BougeRV ski rack - mounting base plates won't fit the crossbars. Still waiting for return label for original item so I can get my refund of $188.00. Three weeks later, still dealing with problem. I do appreciate Shawnee and EDW for their efforts in follow up service attempts.
These made it easy for me to mount a roof basket on top of my truck without drilling holes. This is a great product.
Great product, fit was spot on with correct vehicle specific parts. Etrailer
was fantastic to work with. Great communication and feedback, worked through a small problem with positive outcome. Will definitely purchase from them again, their customer service department is top notch.
Ordered a Rhino Rack for my 2014 GMC Sierra 2500HD Denali. Rack arrived in very good shape and all items were there. Installing at this time and see no problems ahead.
Tricky to rivet tracks onto car with a manual riveter but once done, a great solution for the car with ease of bar removal. My only regret was going with the square bars which result in notable increase in wind noise.
High-quality, sturdy rails, but noisy. There was a pronounced and audible whistle driving with these racks at any common road or highway speed (with the rubber inserts installed across the top). I have since replaced these rails with the Rhino vortex aero style (change of vehicles and the HD bars did not fit the new car). Having used both types several times, I would recommend the aero style over the HD if you have the option.
Product installation instructions were fair, and that is the worst thing I have to say. I havent put anything on the rack yet as I just installed it, but I gave a good tug on the bars and they are SOLID. The product came in a reasonable amount of time, and the feedback for etrailer is that I got followup emails at each step of the process keeping me fully informed right up to the message asking for feedback.
Bottomline: etrailer is a great business to work with, and this product seems to be good too.
Good quality and locks are included. The plastic lock covers are flimsy but they will keep an honest person honest.
Mounted on 2001 GMC Sierra 2500HD. Excellent fit. Looks clean on truck. Sturdy. Small amount of noise. I would buy again and recommend to others. Price far better than some of the big names for the same quality.
The Rhino 2500 series is well built. The etrailer customer service person Trevor W. was great. He was so helpful in getting the right components for my Rhino 2500 roof rack to mount to my 2010 Silverado. Thanks for the help Trevor.
Repeat customer of Etrailer. Always great service and support. Here, acquired parts to reconfigure Rhino Racks to fit another truck after a trade. Made the switch seamlessly and racks are now mounted on the new truck. Use them to transport a racing sailing skiff that is not heavy but is bulky. They have moved the boat to regattas around the country without issue. Excellent product.
After a year of use I can say that this rack and it's fit kit is not bulletproof, but it's darn close!
I give it 4 stars because it is not obvious what is loose if one of the feet start to creep on the roof. WHEN YOU DETECT CREEP BE SURE TO CHECK ALL OF THE CONNECTORS ON THE BAR! Not just the one that "must" be loose!
It took me about 2 months to figure this out and the rack is a design forgiving enough that after about 2,000 miles I still have an undamaged kayak and roof!
Can't really comment on the bars because they didn't arrive but the legs got here. Called Justin and he is getting them shipped, just wondering why it takes so long to get here. Picked on 8/12 and delivery is set for 8/23.
A year ago we purchased this Rhino roof rack system/kit to carry our 15ft canoe and 12ft kayak on our Silverado crew cab. We tow a retro camper, carry bikes, and have a toolbox in the bed, so the truck roof was our easiest option. We also bought removable Yakima folding kayak holders (because the beam width of our two boats was too wide for the cross bars - need to carry them on their sides). I appreciate the build quality, the sturdy finishes, the strong materials and smart design of this rack. We followed the enclosed directions and the etrailer installation video and it was easier and faster than we thought. We've logged thousands of highway and north woods miles with this rack and it's still solid as a rock! Only one minor issue... the square Euro cross-bars create wind noise at highway speeds which is only noticeable when you're not carrying canoes (they make enough wind noise on their own!). We just remove the racks when we don't use them - only takes 5 mins. It's a great product and we expect it to last for many more years! Great service from etrailer as well!
Fit and function perfect. I use this to carry 2 kayaks on top of my Chevy Silverado 2500HD while towing my camper. No issues.
Johnathan W. was very helpful giving me advice with the situation I had, carrying our kayaks while pulling our 5th wheel. He recommended the Curt Front Mount Hitch Receiver Custom and a Thule Goal Post Hitch Mounted Load Bar (which I already had). I also purchased a Rhino Rack Square Bar Roof Rack. I received my order promply. I installed both products ( with the help of my 8 year old grandson Hayden ) I am very happy with the quality and easy installation of all products i have ordered from etrailer in the past. I will continue to do so in the future. Now we will be able to take our kayaks while pulling our 5th wheel. Thank-you etrailer!
While the quality of all the parts I received and the service I got deserved 5 stars, the fact that the clips which hold the rack onto my roof don't fit (and I was assured they would) gets etrailer 3 stars. My truck is a 2006 Silverado 3500 extended cab and the brackets will not fit over the door rubber and slip under the steel rain gutter. I was told these should fit and they are the only clips they have. Looks like I will have to modify them myself to get everything to work.
Ordered a roof rack for my son's kayak. etrailer customer service was a great help in getting me squared away. Very knowledgeable & friendly. I highly recommend them.
Assembly directions were explanatory - the sub-assemblies done at the warehouse made it even easier. The parts went together with no effort. I have a 11.5 foot, 65-lb. kayak that will be carried on the roof rack whenever I travel over 30 miles. I normally tie it down in the truck bed for trips under 30 miles. I have a tri-fold cover for my truck bed and the Rhino Rack 2500 allows me to use the truck bed for gear that can be stowed there on extended fishing trips.
This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.
This is my second Rhino-Rack. They go on very easily and hold the bikes/kayaks and even an extension ladder very well....thanks for a great product
I followed install instructions very closely, pretty straight forward, but you have to ensure you measure twice and cut once. Not a complicated install but how well you do it determines the performance of the rack. Test drive showed it to be very quiet at city and high way speeds. A paper tape measure should be included with install kit, who has anything in the USA the measures millimeters or 32nds of an inch. Would definitely recommend product, feel it is sturdy and durable. Will meet my needs to carry RV equipment and a canoe if needed.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.