ARC Concept Custom LED Pod Lights - Fog Light Upgrade Kit - 40 Watts - 3" Round - Qty 2

Video Transcript for Review of ARC Off Road Lights - Concept Custom LED Pod Lights Fog Light Kit - ARC29RR

Hi, everybody. Andy here with etrailer.com. And today we're gonna take a look at these ARC Concept Custom LED Pod Lights Fog Light Upgrade Kit. Now these custom fit, durable, and corrosion resistant LED fog lights deliver 3,000 lumens of disperse bright white light to help you navigate in inclement weather. As you can see, I have these lights connected to power and I have them on already. And the high quality light output comes from four five watt Osram OSLON LEDs in each light.

Again, giving you a total light output of 3,000 lumens with 1,500 lumens per light. So you can see how bright these are with my studio lights on. Let me go ahead and turn those lights off. Just to kind of give you a demonstration of the brilliant light that these put out and probably a better demonstration is gonna go to a wide view here and hopefully my camera will refocus. It doesn't like it when I turn the lights off here, but I wanna shine this on the wall behind me just to show you that this has a 95 degree wide beam that is created by total internal reflection, or TIR projector lenses.

And these street legal pods are SAE J583 certified for use on all roadways. However, I do wanna mention that you will wanna still review your state's guidelines regarding the use of auxiliary lighting on roadways, but as you can see, these are very bright. I think they're gonna do a great job of helping you see. And I think the light is going to be a very high quality. Now, these lights feature a black powder coated aluminum housing and these brackets, which I already have installed, they are adjustable.

So you're gonna have a wide range of adjustability when you have these brackets mounted and these are also powder coated as well for corrosion resistance. These are IP67 rated to protect against dust and moisture. And this is gonna be a simple installation in your vehicle's factory fog lamp housing. Each lamp plugs into your existing fog light connector with the included adapters, and you see those adapters there in front of me. The first set of adapters that I have are I have two H11 adapters right here, and then these adapters are the 5202/PSX24W adapters.

So you're gonna get two of each and again this is gonna be a very simple, easy plug and play installation. Now this will use the existing fog lamp on and off switch that you already have. And just some overall dimensions, the face diameter itself without this front that we have mounted on here, just the diameter of the face itself, it's gonna be right at three inches. And the overall width, and I'm including the brackets here, we are sitting right at four and a half inches for that overall width. The overall height, we are sitting right at three and three quarters inches tall. And the overall depth, these are gonna be sitting pretty close to, looks like two and 5/8 inches deep. And then let me see if I can give you the measurement of the mounting holes here, center to center. Line up my ruler here. So lining this up center to center, we are gonna be sitting right at two inches on those mounting holes. Now, I do wanna point out that in the photo section of this product page, you're gonna see some additional measurements with the diagram in case you're looking for a few more measurements that I didn't cover. You should be able to find those measurements, again, in the photo section there on that diagram. Now this includes everything that you see here on the table before me. You're gonna get two round LED pods with the brackets that I have already installed, and these are type A fog light brackets. And then I mentioned the adapters that you are going to get, two of each. You're gonna get the hardware to mount those brackets with a set of Allen wrenches as well to help you with getting those brackets on and some additional information that you might find helpful. The wattage is 20 Watts at 13.6 volts DC and that works out to be five Watts per LED. And the current is 1.5 amps at 13.6 volts DC. And the voltage is 10 to 36 volts DC. And finally the power draw is 1.5 amps per light. You are gonna get a sheet here just going over some of what you receive and instructions to help you with the installation process. And that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..