# 1
Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches
This is just what I need so that my bike rack doesn't drag on my driveway. Etrailer had great service and quick shipping.
I welded them to the rear of my toyhauler that came with metal V bars welded to the frame and one had actually broken. Having the wheels has helped the trailer glide over low spots as opposed to the LOUD screeching we got before when it was dragged over them.
# 2
Ultra-Fab Rotating, Hitch Mounted Skid Wheels for RVs up to 30' Long - 4" Diameter - Qty 2
Within 100 miles of driving, one of the two skid wheels started losing its red vinyl coating. On the other hand, it's still serving its purpose.
parts seem okay but packing and shipping was terrible should have been packed much much better
# 3
Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter - Qty 2
You will need a very small grease gun fitting to get grease into the zerk fitting for the bearing. The zerk fitting is surrounded by the nut bolt head on one end of the bearing shaft and my handheld grease gun does not fit into that tight space. Otherwise... as advertised.
Got them attached to my hitch with no problem and had about 3/4 inch difference between the bottom of the wheel and the bar that was scraping. Tested today and they worked good and now no more divots in the pavement. Put them on a 2023 28 foot Forest River Forester
# 4
Roadmaster Rollaway Trailer Hitch Protector
These hitch rollers are a life saver - no more dragging and cutting asphalt any longer. This is my second purchase, first was on a 39 ft Canyon Star and now on a 30 foot VeraCruz. Roller does "NOT" interfere with the hitch.
Item works perfectly in my steep driveway, keeps my waste pipe from dragging! Exactly what I needed!
# 5
Ultra-Fab Steel Micro-Roller for Trailers and RVs - Weld On - 2" Wide x 2-1/4" Tall
I think these were definitely worth the cost. I have a rather steep driveway and knew I was running the risk of dragging the tail end of my brand new tilt deck trailer. So, before taking delivery I sketched up my idea for removable drag rollers and turned the dealer's fabricators loose to make it happen. They turned out better than I hoped and work like a champ. It might be a bit of a chore to get them on and off (no more than 5 mins/side), but was necessary to maintain the loading edge getting all the way to the ground.
Overall I have to give this skid roller a low rating. However if I rate the parts individually I have better results. The bracket is excellent, 1/4" thick steel and the holes are just the right size not too big. The roller is also excellent. The internal bearing is slightly wider than the roller so you can tighten the bolt as much as you want and the roller will still turn. The bolt is very poor. The hole for the recessed grease zerk is too deep weakening the bolt head. The head broke off before the head and nut even shouldered up the the bracket. Also the bolt is either grade 2 or 5. My advice: If you purchase this roller, replace the bolt with 1/2" grade 8; however you will no longer be able to grease the roller.
# 6
Ultra-Fab Steel Mini-Roller for Trailers and RVs - Weld On - 1-1/2" Wide x 2-1/2" Tall
We've all drug the tails of our trailer a time or two. I feel much better after adding these rollers onto my 24' aluminum enclosed car trailer!
Always a good experience with etrailer
# 7
Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 3" Hitch Tubing - 3" Diameter - Qty 2
Replaced my worn out tail dragger wheels with these steel rollers. Easy install, look great, angry the grease fitting are an added bonus. Shipping was fast!
The product itself is great. I haven't had the opertunity to test them yet. The only complaint I have is etrailer shipped it to me in the original box. The box was destroyed. Parts were hanging out, fortunately no parts are missing. These are very heavy and with sharp edges. May want to think about double packing. Other than that, all is good.
# 8
Ultra-Fab Skid Wheels for Class A RVs 34' and Longer - 6" Diameter - Qty 2
These wheels are super heavy duty. I have a 43 foot 5th wheel and have installed them on my trailer hitch cross bars. Once I bought the u-bolts separately they installed very easily. I followed the instructions for the proper hitch installation to be safe. I did receive one wheel with a zerk fitting falling out due to stripped threads. E-Trailer immediately sent a replacement wheel and expedited delivery to get me on the road. The poly urethane wheels roll very smoothly. I haven't towed the rig yet but my driveway is steep and I'll be putting them to the test soon.
Bought for our 36ft travel trailer. We had skids rollers added to the rear in order yo back it up our driveway way. Ones that were originally installed were purchased through our camper garage and busted. These bought through etrailer are heavy duty and made so much better.
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"