Trailer Hitch Installation - 2002 Saturn S Series - Hidden Hitch- Video

All right, today on this 2002 Saturn S series, we're going to install part number 60839 from Hidden Hitch. This is what the hitch looks like once installed on the car. Next, we'll give you some measurements to help you out in selecting some accessories such as the bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 11 inches and from the center of the hitch pin hole to edge of the bumper will be about 8 inches. Now we'll go ahead and show you how the hitch is installed. The first thing we need to do is get our vehicle ready. To do that, we want to go on the inside of the vehicle and remove the carpeting and the spare tire cover from inside the trunk. more

Watch Video

12/31/2014 4:25:05 PM

Trailer Hitch Installation - 2002 Saturn S Series - Draw-Tite- Video

Today on this 2002 Saturn S Series we're going to install Part Number 24620 from Draw Tite. This is what the hitch looks like once installed on the car. Next we'll give you some measurements to help you out in selecting some accessories, such as a bicycle rack or a cargo carrier. From the top of the receiver opening down to the ground will be about 11 inches. From the center of the hitch pin hole to the edge of the bumper will be about 8 inches. Now we'll go ahead and show you how the hitch is installed. more

Watch Video

12/31/2014 4:20:34 PM

TowReady Taillight Converter Hardwire Kit Installation - 2002 Saturn S Series- Video

Today on a 2002 Saturn S-Series, we're going to install part number 119178KIT. First thing we need to is get access to our wire harness. We're going to access the wires right behind the tail lights. All we have to do is peel back the interior carpeting to get access to the wires. To test our wires we're going to need a ground, so we'll take our white wire and ground it to the interior sheet metal, then we can use that for ground. We'll take our tester that comes with the kit and ground it, then we test our wires. First we'll check for our running lights circuit. We'll take a quick splice connector, connect our brown wire to our brown wire on our module for running lights. Next we'll look for our left turn signal. Our left turn is going to be yellow, and we'll connect that to yellow from the module. Now we'll look for our brake signal. more

Watch Video

12/22/2014 6:44:38 AM

  1