Voyager RV Camera VCMS50RGP Review

content loading

Customers compare VCMS50RGP to these similar products

Products Featured in this Video

Review of Voyager RV Electronics VCMS50RGP

Today we're going to be taking a look at the Voyager Camera with LED Low Light Assist. This is for the right hand side of your RV. This camera is a side mount camera, it delivers real-time images of the vehicle's surroundings. That's really going to help the driver when it comes to changing lanes, merging, and making wide turns. This CMOS camera is anti-blooming, which means the bright areas that can appear around images are eliminated. This feature makes this camera more effective in high-light and low-light environments. CMOS is a camera sensory technology, and it simply stands for complementary metaloxidesemiconductor. This camera is an infrared LED camera.

It's going to feature low-light assist for easy to see images in low-light or nighttime conditions. It's also going to feature high-performance color optics. It is designed for right hand side installation. Again, it is a side mount camera. It's going to feature a corrosion-resistant aluminum housing. It's very strong and durable, protects that camera body very well.

It's going to also feature that gray primed finish. The rubber base on the unit is going to protect the mounting area so that way you don't have to worry about scuffing or scratching the exterior of your RV or motor home. It's going to create a tight seal to keep out dirt and moisture. The cord that's connected to the camera, it does come with this grommet right here. That's going to seal up the pass-through locations, so that's a nice design as well. The overall unit does feature a water-proof design. It's going to feature an IP69K rating. When it comes to the overall dimensions, starting with the overall width, that's going to measure about 1 5/8 of an inch.

From back to front is about 3 1/4 inches. The overall height or the depth from the mounting surface to the edge of the camera is about 1 7/8 of an inch, maybe 1 3/4, right in that area. The base does feature a four mount hole design. Mounting hardware is included. The harness that's connected to the camera is going to measure about 27 inches long. It's going to feature a four pin connector that connects to your RV's camera system. Other components of the system like the monitor, control station, wiring harness, extension cables, all that kind of stuff, that's all sold separately.

What you see here on the table is what you're going to get with this part number. It also comes with a mounting template, so that takes all the guess work out of mounting. It lays it out exact sizing and the correct locations of where you need all your holes. That's going to do it for today's look at the Voyager Camera with the LED Low Light Assist for the right hand side of your RV.

Questions and Comments about this Video

add comment

Info for this part was:

Video Edited:
Joshua S
Video by:
Dustin K
Installed by:
Cole B
Installed by:
David F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.