Voyager RV Camera - Observation Camera - WVHS43 Review

content loading

Customers compare WVHS43 to these similar products

Products Featured in this Video

Review of Voyager RV Camera WVHS43

Speaker 1: Today we're going to be taking a look at the Voyager Digital WiSight Observation System. This has the camera, monitor, and mount. This is going to eliminate any blind spots on your vehicle by having that reverse camera there.This is specifically designed to work with RVs that have the factory-installed WiSight technology pre-wire plate. It's going to look something like this once you take off that plate on the back of your RV. There will be a little plate mounted up there. You just remove those four screws, and then hook your camera up.

It just pushes in onto that mounting plate.Now, if you do have to use this. This template to convert a Furrion pre-wire plate, you will have to connect it to power and ground. This system does support up to four cameras, but it's gonna come with this one camera. This can be adjusted with the screws on the side, using the little Allen wrench that is included. It also comes with four screws to get this mounted in, if you don't already have them.

And then the two screws to mount that little template on there as well.This is also going to have a CMOS sensor, to stream the high-quality video, even at high speeds. That digital transmitter is going to eliminate interference from other devices, so you don't have to worry about your cell phone causing any interference while you use it.And it's going to offer high-quality, uninterrupted videos for vehicles up to 60 feet away, so even if you have a really large RV, this is still gonna transmit that image well enough that you can still see where you're going. And that transmitter is built into the camera to simplify the setup.It has auto-pairing, to allow you to easily pair this camera to the monitor, with the push of a button. As far as the monitor, it is going to have a 4.3 inch screen. It is full-color and it comes with a windshield suction mount, so you can mount this up to your glass.

And, it does have a little ball joint on the back so you can adjust that to whatever angle you need it to be, so that you can have easy viewing.The monitor just snaps into that mount, so if you press down on this little catch, that'll release it, and you can take it out and put this somewhere safe, whenever you're not driving or not using it. And the monitor just comes off as well, by pulling that little tab. To put it back, you just align the two little slots on the bottom of the screen with that mount. Get those in place in the little cradle, and then it's gonna snap back into place.Now, again, that supports up to four wireless cameras, or three wireless cameras and one wired Voyager camera, like we have here. The brightness can be adjusted with the monitor buttons and it does have...

And a speaker to allow you to hear the audio, that just has to be plugged in to the audio jack here on the side. All of the adjustment buttons are on the side of the screen there as well.The camera itself is waterproof. And, again, it can be adjusted for the best viewing angle, so you can easily see where you're going in reverse, and that audio feed lets you hear what's going on, even when it's out of range.There's a wide-angle view, to let you see even more when you're going in reverse. It also has infrared LEDs on the camera, to provide better viewing in night time vision or in low light. This is a simple and quick installation with some drilling required, and it does plug directly into a pre-wired socket and is secured with OEM screws.Now this could work on vehicles again, up to 60 feet long. That monitor screen size is 4.3 inches. The voltage that this requires is 12 volt DC. And, it just weighs a little; about five pounds.So, that's gonna do it for our look at the Voyager Digital WiSight Observation System, with camera, monitor and mount.

Questions and Comments about this Video

Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Installed by:
Kathleen M
Employee Conner L
Installed by:
Conner L
Employee Jonathan Y
Video by:
Jonathan Y

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.