bing tracking image

Review of Vision X Vehicle Lights - Multicolor LED Strobe Light Kit - HIL-STM

content loading

Customers compare HIL-STM to these similar products




Products Featured in this Video



Vision X Vehicle Lights - Multicolor LED Strobe Light Kit - HIL-STM Review


Jeff: Hello everybody, this is Jeff at etrailer.com. Today, we're going to take a look at this VisionX 12 volt DC Tantrum multicolor LED pod light kit with the remote control. Now this will help add light to your vehicle's under carriage with this LED pod strobe light kit. And a strobe light kit will add fun and functional lighting to your vehicle, helps eliminate obstacles while rock crawling or off-roading, and it gives you lighting for any nighttime undercarriage repairs. It also just creates a nice, bright, colorful ride. It does include these eight led pods right here, the distribution block that they connect to, a master controller with a six foot long wire that plugs into your 12 volt power accessory plug, a nice wireless remote, and the mounting hardware comes with clips and some 3M tape to install this.

Now the LED pods themselves, it's eight of the long lasting LED pods. And I'm going to try to do a zoom in so you can get a better look at it.So, if we zoom in here's your LED pods, these can light up in red, green, blue, and even multicolor. They are durable enough for off-roading and rock crawling. And these LED pods can be set to shine solid or flashing sequence. And the lights can also be hardwired into your vehicle's lighting system.

It only has an extremely low power draw of 0.67 amps. You can see there a nice durable weatherproof aluminum housing, which protects the lights from any damage.And now the distribution block right here that it plugs into. This is has an IP67 waterproof rating. And then the master controller right here, you can see on this, has the buttons on it. It has a power button.

It also has the buttons to change color, sequence and the scan speed. And then along with this 12 volt plugin, 12 volt adapter. At the end of this video I'm going to plug this in just to show you how it operates and the different features it has. The wireless remote right here, this will let you control the lights from up to a thousand feet away. Just slide it down, it'll give you the four buttons to control the speed, color, and sequence also.Now this is an easy installation.

It does use the included 3M, let me just zoom out here so we can see, these 3M round dots that you can use for the pods, or you can use the mounting clips also, either way. The input voltage on this is 12 volt DC. The pod diameters are one and one quarter inches. And the wire length, what's nice about it is, that there's eight of them they give you a four with a 10 foot wire length and then four with a 20 foot wire length. And the wattage is one watt per light.So, what we're going to do now is I'm going to go ahead and hook this up to some 12 volt power. Plug that in. I want that all plugged in. We'll go ahead and hit the power. And with the power, I'll go ahead and turn off the overhead lights. And you can see it's just a solid color right now, and it is a blue color. And again, if you want to change the color, now you go to a green, you go to a red, blue. Now there's a multi choosing red and green, and there's a red and blue. There's all three and then it goes back to solid. Now, if you want to change the sequence, you can see they're all solid now. If you hit it, you can see it'll go in sequence now. And if you hit it again, changes the sequence.So, there's many different sequences. And you can also change the color along with the sequence. And then it has a scan speed. So if you hit that, you can see the speed will change. Slows it down or speeds it up. And also just want to show you the remote right here. We just turned the lights back on. This is the remote, has the four buttons. It'll do the same thing. The B is the on and off. So now it's off, push the B again and comes on. And to see it'll change the colors. And again, this wireless remote will let you do it up to a thousand feet away. And then same way, you can change the sequence or the speed. Go ahead and turn that off. Turn back on overhead lights. But that should do it for the review on this VisionX 12 volt DC Tantrum multicolor LED pod light kit with the remote control.


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.