Patrick Distribution RV Lighting - Ceiling Light - 277-000114 Review

content loading

Customers compare 277-000114 to these similar products

Products Featured in this Video

Review of Patrick Distribution RV Lighting 277-000114

Today we're going to be taking a look at the six LED surface mount dome style light fixture. This surface mount dome style light fixture is going to be perfect for your RV or enclosed trailer. The unit features a white plastic base and two acrylic lens. It's designed for 12 volt systems. These acrylic lens are nice and clear. They're going to allow plenty of light to come through.

They also got a unique pattern to it, which really helps disperse the light. It's going to feature a total of six bright LEDs, that's three LEDs per side. Now LEDs are great replacements for incandescent lights. LEDs last longer, they burn brighter, they're much more efficient. They also have a much faster response time.

You don't have to worry about replacing bulbs or worry about brittle filaments. The light does feature an easily accessible on and off switch located right there at the center of the light. There's going to be a total of six mount holes, three mount holes per side. Mounting hardware not included. To gain access to the mount holes, you'll need to remove the lens. They simply just slide away and then pop right off.

Very easy to remove, so you gain access to your mount holes that way. Now I do want to mention some measurements for you real quick. When it comes to the mount hole separation, these mount holes are separated on center up and down apart from one another by three inches. Side to side, the center holes are separated on center by two inches and outer edge to outer edge holes are separated on center by nine and 5/8 of an inch. Each hole is going to have a diameter of 3/16 of an inch.

When you're ready to put the lens back on, simply line up the tabs with the groove and then slide it back into place. When it comes to the overall dimensions of the light, starting with the overall length, edge to edge it's going to measure about 11 inches long. The overall width it's going to be about four and a quarter. The overall depth from mounting area to the very top is about one inch deep. It's a nice, low profile light. The light fixture does feature a two wire design, your black wire's for power and your white wire's for ground. We're going to go ahead and hook it up to our power source, that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead lights, so you can see it in a low light setting. You can see here that it sends out a really nice bright consistent signal. It's a really great light containing a total of six LEDs. The multi diode design really helps optimize the light out put. Again LEDs do have a much faster response time, what that means is when we hit the on button, the lights come on right away. There's no delayed timing like when using incandescent bulbs. That's going to do it for today's look at the six LED surface mount dome style light.

Questions and Comments about this Video


How many lumins does this light put out? 50030

Reply from Rachael H.

Patrick Distribution does not provide the lumen output data or kelvin specs for their lights including # 277-000114. The light is comparable to Optronics dome light # RVILL34 which is rated at 920 lumen (815 effective lumen output). 45708

Info for this part was:

Video Edited:
Jacob T
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.